Functional electrospun nanofibres of poly(lactic acid) blends with polyaniline or poly(aniline-co-benzoic acid)

Functionalised nanofibres of a controlled fibre diameter were electrospun from solutions of polyaniline (PANI) or poly(aniline-co-m-aminobenzoic acid) (P(ANI-co-m-ABA)) with poly(lactic acid) (PLA). Soluble copolymers of aniline (ANI) and m-aminobenzoic acid (m-ABA) were prepared and the average molecular weight of the copolymers. as determined by gel permeation chromatography, was found to decrease from 13,800 g mol(-1) to 1640 g mol(-1) with an increase of m-ABA content in the copolymer. By contrast, FT-MS results revealed that homopolymerisation of m-ABA formed oligomers rather than polymeric chains due to low reactivity of m-ABA monomer. ATR FTIR, Raman spectroscopy, and conductivity measurements confirmed incorporation of the conducting (co)polymers within the PLA based nanofibres. The conductivity of the nanofibres increased significantly with increased proportion of PANI or P(ANI-co-m-ABA) to 2.0 x 10(-5) mS cm(-1) for PLA/PANI (3.27% of PANI) and 8.3 x 10(-6) mS cm(-1) for PLA/P(ANI-co-m-ABA) (5.80% of the copolymer in the blend). The nanofibre diameter decreased from 640 +/- 195 nm for pure PEA fibres to 141 68 nm for PLA/PANI, and to 124 +/- 31 nm for PLA/P(ANI-co-m-ABA). These fibres have potential for a range of applications, such as electroactive scaffold tissue engineering and sensing. (C) 2010 Elsevier B.V. All rights reserved.