Related references
Note: Only part of the references are listed.Pure shear fracture study in a brittle graphite material containing a U-notch
A. R. Torabi et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2014)
Strain energy density to assess mode II fracture in U-notched disk-type graphite plates
A. R. Torabi et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2014)
High-temperature fatigue strength of a copper-cobalt-beryllium alloy
Filippo Berto et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2014)
Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches
F. Berto et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2014)
Brittle fracture of sharp and blunt V-notches in isostatic graphite under pure compression loading
F. Berto et al.
CARBON (2013)
Flexural strength and defect behaviour of polygranular graphite under different states of stress
M. Mostafavi et al.
CARBON (2013)
Tensile fracture in coarse-grained polycrystalline graphite weakened by a U-shaped notch
A. R. Torabi et al.
ENGINEERING FRACTURE MECHANICS (2013)
Stress intensity factors and fatigue growth of surface cracks in notched shells and round bars: two decades of research work
Andrea Carpinteri et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2013)
Brittle failure of inclined key-hole notches in isostatic graphite under in-plane mixed mode loading
P. Lazzarin et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2013)
Surface cracks in fatigued structural components: a review
Roberto Brighenti et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2013)
Generalised Neuber concept of fictitious notch rounding
D. Radaj et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Sudden Fracture from U-Notches in Fine-Grained Isostatic Graphite Under Mixed Mode I/II Loading
A. R. Torabi
INTERNATIONAL JOURNAL OF FRACTURE (2013)
Fracture Assessment of U-Notched Graphite Plates Under Tension
A. R. Torabi
INTERNATIONAL JOURNAL OF FRACTURE (2013)
The formation of fracture process zones in polygranular graphite as a precursor to fracture
S. Nakhodchi et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Temperature effects on brittle fracture in cracked asphalt concretes
Majid-Reza Ayatollahi et al.
STRUCTURAL ENGINEERING AND MECHANICS (2013)
Brittle fracture of sharp and blunt V-notches in isostatic graphite under torsion loading
F. Berto et al.
CARBON (2012)
Quantitative in situ study of short crack propagation in polygranular graphite by digital image correlation
M. Mostafavi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2012)
Induced out-of-plane mode at the tip of blunt lateral notches and holes under in-plane shear loading
F. Berto et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2012)
Fictitious notch rounding concept applied to V-notches with end holes under mode 3 loading
Filippo Berto
INTERNATIONAL JOURNAL OF FATIGUE (2012)
The fictitious notch rounding approach applied to V-notches with root holes subjected to mode I loading
Filippo Berto et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2012)
Brittle fracture of U-notched graphite plates under mixed mode loading
F. Berto et al.
MATERIALS & DESIGN (2012)
Comprehensive data for rapid calculation of notch stress intensity factors in U-notched Brazilian disc specimen under tensile-shear loading
A. R. Torabi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Experimental determination of tensile strength and KIc of polymer concretes using semi-circular bend (SCB) specimens
M. R. M. Aliha et al.
STRUCTURAL ENGINEERING AND MECHANICS (2012)
Mixed mode brittle fracture of sharp and blunt V-notches in polycrystalline graphite
M. R. Ayatollahi et al.
CARBON (2011)
An improved semi-circular bend specimen for investigating mixed mode brittle fracture
M. R. Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2011)
On the use of an anti-symmetric four-point bend specimen for mode II fracture experiments
M. R. Ayatollahi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2011)
FICTITIOUS NOTCH ROUNDING CONCEPT APPLIED TO V-NOTCHES WITH END HOLES UNDER MODE I LOADING
Filippo Berto et al.
INTERNATIONAL JOURNAL OF FRACTURE (2011)
Failure assessment of notched polycrystalline graphite under tensile-shear loading
M. R. Ayatollahi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Tensile fracture in notched polycrystalline graphite specimens
M. R. Ayatollahi et al.
CARBON (2010)
A multifractal analysis of fatigue crack growth and its application to concrete
Andrea Carpinteri et al.
ENGINEERING FRACTURE MECHANICS (2010)
Effect of the thickness on elastic deformation and quasi-brittle fracture of plate components
A. Kotousov et al.
ENGINEERING FRACTURE MECHANICS (2010)
Influence of the cold-drawing process on fatigue crack growth of a V-notched round bar
Andrea Carpinteri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Rapid calculations of notch stress intensity factors based on averaged strain energy density from coarse meshes: Theoretical bases and applications
Paolo Lazzarin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Transverse singular effects in V-shaped notches stressed in mode II
Steven Harding et al.
INTERNATIONAL JOURNAL OF FRACTURE (2010)
Determination of mode II fracture toughness for U-shaped notches using Brazilian disc specimen
M. R. Ayatollahi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
Fictitious Notch Rounding approach of pointed V-notch under in-plane shear
F. Berto et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2010)
Fictitious notch rounding concept applied to sharp V-notches: Evaluation of the microstructural support factor for different failure hypotheses Part II: Microstructural support analysis
F. Berto et al.
ENGINEERING FRACTURE MECHANICS (2009)
Local fatigue strength parameters for welded joints based on strain energy density with inclusion of small-size notches
D. Radaj et al.
ENGINEERING FRACTURE MECHANICS (2009)
Brittle failures from U- and V-notches in mode I and mixed, I plus II, mode: a synthesis based on the strain energy density averaged on finite-size volumes
P. Lazzarin et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2009)
Fatigue assessment of welded joints under slit-parallel loading based on strain energy density or notch rounding
D. Radaj et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
A review of the volume-based strain energy density approach applied to V-notches and welded structures
F. Berto et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2009)
Mixed mode fracture analysis of polycrystalline graphite - A modified MTS criterion
M. R. Ayatollahi et al.
CARBON (2008)
Fictitious notch rounding concept applied to sharp V-notches: Evaluation of the micro structural support factor for different failure hypotheses. Part I: Basic stress equations
F. Berto et al.
ENGINEERING FRACTURE MECHANICS (2008)
Some advantages derived from the use of the strain energy density over a control volume in fatigue strength assessments of welded joints
P. Lazzarin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
A new discontinuous FE formulation for crack path prediction in brittle solids
Roberto Brighenti
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)
Analysis of crack propagation in nuclear graphite using three-point bending of sandwiched specimens
Li Shi et al.
JOURNAL OF NUCLEAR MATERIALS (2008)
Local strain energy to assess the static failure of U-notches in plates under mixed mode loading
F. J. Gomez et al.
INTERNATIONAL JOURNAL OF FRACTURE (2007)
The initiation and propagation of thermal shock cracks in graphite
Bruno A. Latella et al.
CARBON (2006)
On determination of mode II fracture toughness using semi-circular bend specimen
M. R. Ayatollahi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Some expressions for the strain energy in a finite volume surrounding the root of blunt V-notches
P Lazzarin et al.
INTERNATIONAL JOURNAL OF FRACTURE (2005)
Cracked Brazilian disc specimen subjected to mode II deformation
MR Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2005)
Failure criteria for brittle elastic materials
Z Yosibash et al.
INTERNATIONAL JOURNAL OF FRACTURE (2004)
Evaluation of thermal shock strengths for graphite materials using a laser irradiation method
JH Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Strength and fracture toughness of interpenetrating graphite/aluminium composites produced by the indirect squeeze casting process
T Etter et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches
P Lazzarin et al.
INTERNATIONAL JOURNAL OF FRACTURE (2001)
The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading
DJ Smith et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2001)
Share Paper
