Related references
Note: Only part of the references are listed.Modelling of composite sandwich structures with honeycomb core subjected to high-velocity impact
Brenda L. Buitrago et al.
COMPOSITE STRUCTURES (2010)
Quasi-static indentation tests on aluminium foam sandwich panels
Dong Ruan et al.
COMPOSITE STRUCTURES (2010)
A parametric study on compressive characteristics of Wire-woven bulk Kagome truss cores
Byung-Kon Lee et al.
COMPOSITE STRUCTURES (2010)
Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures
Jian Xiong et al.
COMPOSITE STRUCTURES (2010)
Flatwise buckling optimization of hexachiral and tetrachiral honeycombs
W. Miller et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Smart tetrachiral and hexachiral honeycomb: Sensing and impact detection
H. Abramovitch et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
The transverse elastic properties of chiral honeycombs
A. Lorato et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Elastic constants of 3-, 4-and 6-connected chiral and anti-chiral honeycombs subject to uniaxial in-plane loading
A. Alderson et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Some theoretical considerations on the dynamic response of sandwich structures under impulsive loading
Feng Zhu et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)
Effects of defects on the in-plane dynamic crushing of metal honeycombs
Xin-Chun Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2010)
Multiscale structural design of columns made of regular octet-truss lattice material
Mostafa S. A. Elsayed et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
On the compressive strength of open-cell metal foams with Kelvin and random cell structures
Wen-Yea Jang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
Indentation into polymeric foams
E. A. Flores-Johnson et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures
S. Tsopanos et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2010)
The Mechanical Properties of Sandwich Structures Based on Metal Lattice Architectures
Y. Shen et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2010)
Static and Dynamic Energy Absorption of Aluminum Honeycombs and Polymeric Foams Composites
G. Caserta et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2010)
Failure Modes and Influence of the Quasi-static Deformation Rate on the Mechanical Behavior of Sandwich Panels with Aluminum Foam Cores
Isabel Duarte et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2010)
Engineered Cellular Materials, with Emphasis on Materials Produced with Additive Layer and Fold Core Manufacturing Processes
Bob Mines
STRAIN (2010)
Behaviour of sandwich panels subjected to intense air blast - Part 1: Experiments
G. N. Nurick et al.
COMPOSITE STRUCTURES (2009)
Virtual testing of sandwich core structures using dynamic finite element simulations
Sebastian Heimbs
COMPUTATIONAL MATERIALS SCIENCE (2009)
A numerical simulation of the blast impact of square metallic sandwich panels
Feng Zhu et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2009)
The blast resistance of sandwich composites with stepwise graded cores
Erheng Wang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
On the crushing of aluminum open-cell foams: Part II analysis
Wen-Yea Jang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
A numerical study on the rate sensitivity of cellular metals
Y. D. Liu et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
On the crushing of aluminum open-cell foams: Part I. Experiments
Wen-Yea Jang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
Effect of imperfections on the mechanical behavior of wire-woven bulk kagome truss PCMs under shear loading
Sangil Hyun et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2009)
A new type of sandwich panel with periodic cellular metal cores and its mechanical performances
Chae-Hong Lim et al.
MATERIALS & DESIGN (2009)
A wire-woven cellular metal: Part-I, optimal design for applications as sandwich core
Yong-Hyun Lee et al.
MATERIALS & DESIGN (2009)
Constitutive relations and failure criterion of planar lattice composites
Yihui Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
The quasi-static and blast loading response of lattice structures
S. McKown et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2008)
In-plane elastic moduli and plastic collapse strength of regular hexagonal honeycombs with dual imperfections
Mei-Yi Yang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2008)
On the microstructure of open-cell foams and its effect on elastic properties
Wen-Yea Jang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)
Analytical modeling and finite element simulation of the plastic collapse of sandwich beams with pin-reinforced foam cores
Tao Liu et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)
Homogenization and equivalent in-plane properties of two-dimensional periodic lattices
Stefano Gonella et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)
Mechanical properties of two novel planar lattice structures
Y. H. Zhang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)
Buckling behavior of Kelvin open-cell foams under [001], [011] and [111] compressive loads
Dai Okumura et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)
Size effects of basic cell in static analysis of sandwich beams
G. M. Dai et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)
Degradation of elastic modulus of progressively crushable foams in uniaxial compression
E. A. Flores-Johnson et al.
JOURNAL OF CELLULAR PLASTICS (2008)
Edge effects in compression testing periodic cellular metal sandwich cores
B. A. Bouwhuis et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Shear behavior of aluminum lattice truss sandwich panel structures
Gregory W. Kooistra et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Mechanical properties of an extruded pyramidal lattice truss sandwich structure
Douglas T. Queheillalt et al.
SCRIPTA MATERIALIA (2008)
Mechanical property measurement at the micro/nano-scale
W. N. Sharpe
STRAIN (2008)
On the characterisation of foam and micro-lattice materials used in sandwich construction
R. A. W. Mines
STRAIN (2008)
Investigation on the Static Response and Failure Process of Metallic Open Lattice Cellular Structures
G. N. Labeas et al.
STRAIN (2008)
Wire-woven bulk Kagome truss cores
Yong-Hyun Lee et al.
ACTA MATERIALIA (2007)
Multi-objective optimization of the sandwich panels with prismatic cores using genetic algorithms
X. H. Tan et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
Imperfection sensitivity of pyramidal core sandwich structures
Russell Biagi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
Dynamic crushing behavior of honeycomb structures with irregular cell shapes and non-uniform cell wall thickness
K. Li et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
Minimum weights of pressurized hollow sandwich cylinders with ultralight cellular cores
T. Liu et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
Structural response of pyramidal core sandwich columns
Francois Cote et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
Design optimization of truss-cored sandwiches with homogenization
T. Liu et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Multi-axial failure of metallic strut-lattice materials composed of short and slender struts
Mulalo Doyoyo et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
The compressive and shear responses of corrugated and diamond lattice materials
F. Cote et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Mechanical behavior of sandwich panels with tetrahedral and Kagome truss cores fabricated from wires
Ji-Hyun Lim et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
The response of clamped sandwich plates with metallic foam cores to simulated blast loading
DD Radford et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
The effect of cell irregularity on the high strain compression of 2D Voronoi honeycombs
HX Zhu et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Multifunctional periodic cellular metals
HNG Wadley
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)
Deformation rate effects on failure modes of open-cell Al foams and textile cellular materials
S Lee et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Strain-rate effect and micro-structural optimization of cellular metals
JL Yu et al.
MECHANICS OF MATERIALS (2006)
Strength optimization of metallic sandwich panels subject to bending
HJ Rathbun et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
Finite element modeling concepts and linear analyses of 3D regular open cell structures
MH Luxner et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Micromechanical analysis of lattice blocks
J Aboudi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
Partition energy absorption of axially crushed aluminum foam-filled hat sections
HW Song et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
Pyramidal lattice truss structures with hollow trusses
DT Queheillalt et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Effects of cell shape and cell wall thickness variations on the elastic properties of two-dimensional cellular solids
K Li et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
Compressive response of open-cell foams. Part I: Morphology and elastic properties
L Gong et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
Compressive response of open cell foams - Part II: Initiation and evolution of crushing
L Gong et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
Simulation of impact on sandwich structures
MQ Nguyen et al.
COMPOSITE STRUCTURES (2005)
Cellular metal lattices with hollow trusses
DT Queheillalt et al.
ACTA MATERIALIA (2005)
Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium
GW Kooistra et al.
ACTA MATERIALIA (2004)
Mechanical response of single-layer tetrahedral trusses under shear loading
Y Sugimura
MECHANICS OF MATERIALS (2004)
Mechanics of linear cellular alloys
AM Hayes et al.
MECHANICS OF MATERIALS (2004)
A protocol for characterizing the structural performance of metallic sandwich panels: application to pyramidal truss cores
FW Zok et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2004)
Measurement and simulation of the performance of a lightweight metallic sandwich structure with a tetrahedral truss core
HJ Rathbun et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2004)
Simulated properties of Kagome and tetragonal truss core panels
S Hyun et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
Design of metallic textile core sandwich panels
FW Zok et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
Preliminary assessment of sandwich plates subject to blast loads
ZY Xue et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2003)
Fabrication and structural performance of periodic cellular metal sandwich structures
HNG Wadley et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
On the performance of truss panels with Kagome cores
J Wang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
The structural performance of near-optimized truss core panels
S Chiras et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2002)
Experimental and numerical study on bending collapse of aluminum foam-filled hat profiles
WG Chen
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)
Mechanical behavior of a three-dimensional truss material
JC Wallach et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)
Defect sensitivity of a 3D truss material
JC Wallach et al.
SCRIPTA MATERIALIA (2001)
Collapse of truss core sandwich beams in 3-point bending
VS Deshpande et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)
Effective properties of the octet-truss lattice material
VS Deshpande et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)
Effects of cell irregularity on the elastic properties of 2D Voronoi honeycombs
HX Zhu et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)
Multifunctional microtruss laminates: Textile synthesis and properties
DJ Sypeck et al.
JOURNAL OF MATERIALS RESEARCH (2001)
Elastic moduli of model random three-dimensional closed-cell cellular solids
AP Roberts et al.
ACTA MATERIALIA (2001)
The crush behaviour of Rohacell-51WF structural foam
QM Li et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)
The in-plane non-linear compression of regular honeycombs
HX Zhu et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)