4.7 Article

Microcrystalline silicon-oxygen alloys for application in silicon solar cells and modules

Journal

SOLAR ENERGY MATERIALS AND SOLAR CELLS
Volume 119, Issue -, Pages 134-143

Publisher

ELSEVIER
DOI: 10.1016/j.solmat.2013.05.053

Keywords

mu c-SiOx:H; Intermediate reflector; Photon management; Tandem cells; Hetero junction cells; Solar modules

Funding

  1. EC [283501]
  2. European Commission [41378]

Ask authors/readers for more resources

Microcrystalline silicon oxide (mu c-SiOx:H) alloys prepared by plasma enhanced chemical vapor deposition (PECVD) represent a versatile material class for opto-electronic applications especially for thin-film and wafer based silicon solar cells. The material is a phase mixture of microcrystalline silicon (pc-Si:H) and amorphous silicon oxide (a-SiOx:H). The possibility to enhance the optical band gap energy and to adjust the refractive index over a considerable range, together with the possibility to dope the material p-type as well as n-type, makes mu c-SiOx:H an ideal material for the application as window layer, as intermediate reflector (IR), and as back reflector in thin-film silicon solar cells. Analogously, mu c-SiOx:H is a suitable material for p- and n-type contact layers in silicon hetero junction (SHJ) solar cells. The present paper gives an overview on the range of physical parameters (refractive index, optical band gap, conductivity) which can be covered by this material by variation of the deposition conditions. The paper focuses on the interdependence between these material properties and optical improvements for amorphous silicon/ microcrystalline silicon (a-Si:H/mu c-Si:H) tandem solar cells prepared on different substrates, such as Asahi (VU) and sputtered ZnO:Al. It gives a guideline on possible optical gains when using doped mu c-SiOx:H in silicon based solar cells. As intermediate reflector in a-Si:H/mu c-Si:H tandem cells mu c-SiOx:H leads to an effective transfer of short circuit current generation from the bottom cell to the top tell resulting in a possible thickness reduction of the top cell by 40%. Within another series of solar cells shown in this paper a short circuit current density of 14.1 mA/cm(2) for an a-Si:H/mu c-Si:H tandem solar cell with a mu c-SiOx:H intermediate reflector is demonstrated. A SHJ solar cell on a flat (non-textured) wafer using p- and n-type doped pc-SiOx:H contact layers with an effective area efficiency of 19.0% is also presented. (C) 2013 Elsevier B.V. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available