4.7 Article

Novel organic-inorganic pervaporation membrane with a superhydrophobic surface for the separation of ethanol from an aqueous solution

Journal

SEPARATION AND PURIFICATION TECHNOLOGY
Volume 127, Issue -, Pages 61-69

Publisher

ELSEVIER SCIENCE BV
DOI: 10.1016/j.seppur.2014.02.032

Keywords

Superhydrophobic; Pervaporation; Ethanol aqueous solution; Membrane; Trade-off phenomenon

Funding

  1. Natural Science Foundation of Jiangsu Province [BK20130925]
  2. National Natural Science Foundation of China [21306080]
  3. Research Subject of Environmental Protection Department of Jiangsu Province of China [2013018]
  4. Project of Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)

Ask authors/readers for more resources

In the pervaporation (PV) of organics from aqueous solutions, the adsorption step is usually the rate-limiting step, which affects membrane separation performance. To enhance the affinity of membrane surface to organics or to weaken the affinity to water in order to increase membrane separation performance, many methods have been developed to modify the characteristics of the membrane surface. In this work, a superhydrophobic surface was introduced to decrease the affinity of the membrane surface to water. A simple and facile casting method was used for the preparation of a pervaporation membrane with superhydrophobic surfaces using SiO2 and polydimethylsiloxane (PDMS) as membrane materials. The effect of pre-polymerization of PDMS at different temperatures was first investigated. Then, different membrane substrates were studied. The results indicated that a higher roughness of the membrane substrate surface leads to the easy formation of a superhydrophobic surface and that a pervaporation membrane with superhydrophobic surface was obtained, whose water static contact angle is 152 +/- 0.6 degrees and water sliding angle is 5 degrees. Subsequently, the home-made pervaporation membrane was characterized for its ability to separate a 5 wt% ethanol aqueous solution under different conditions. The results indicated that the separation factor obtained using the membrane with a superhydrophobic surface was nearly five times higher than that obtained using a membrane without a superhydrophobic surface. Furthermore, when the separation was performed at different feed concentrations, the trade-off phenomenon in the PV process was observed to be overcome using the membrane with a superhydrophobic surface. Thus, the results of this work are helpful to gain insight into the control of surface wettability to enhance membrane separation performance in pervaporation process. (C) 2014 Elsevier B.V. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available