Auxetic structure for increased power output of strain vibration energy harvester

This paper develops an auxetic (negative Poisson's ratio) piezoelectric energy harvester (APEH) to increase the power output when harnessing strain energy. The APEH consists of a piezoelectric element bonded to an auxetic substrate. The auxetic substrate concentrates the applied stress and strain into the region of the piezoelectric element and introduces auxetic behaviour in the piezoelectric element, both of which increase the electric power output. A finite element model was developed to optimise the design and verify the mechanism of the power increase. Three APEHs were manufactured and characterised. Their performance was compared with two equivalent strain energy harvesters with plain substrates. Experimental results show that the APEHs, excited by sinusoidal strains of 250 is peak-to-peak at 10 Hz, are able to produce electric power of up to 191.1 mu W, which is 14.4 times that of the peak power produced by the plain harvesters (13.4 mu W). The power gain factor is constant between samples as the amplitude and frequency of their applied strains are varied. The model and experimental results are in good agreement, once accounting for the imperfect bonding of the epoxy using the spring constant of the Thin Elastic Layers on the modelled epoxy surfaces. (C) 2018 The Authors. Published by Elsevier B.V.