Related references
Note: Only part of the references are listed.Kinetic-catalytic method for sequential determination of iron and copper using a chip coupled to a multipumping flow system
Fatima Zohra Abouhiat et al.
ANALYTICAL METHODS (2015)
Modular microfluidics for point-of-care protein purifications
L. J. Millet et al.
LAB ON A CHIP (2015)
Reconfigurable microfluidic systems with reversible seals compatible with 2D and 3D surfaces of arbitrary chemical composition
Abhiteja Konda et al.
LAB ON A CHIP (2015)
Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips
Ho Nam Chan et al.
MICROFLUIDICS AND NANOFLUIDICS (2015)
Inexpensive, rapid prototyping of microfluidic devices using overhead transparencies and a laser print, cut and laminate fabrication method
Brandon L. Thompson et al.
NATURE PROTOCOLS (2015)
Continuous liquid interface production of 3D objects
John R. Tumbleston et al.
SCIENCE (2015)
3D printed molds for non-planar PDMS microfluidic channels
Yongha Hwang et al.
SENSORS AND ACTUATORS A-PHYSICAL (2015)
Using Click-e-Bricks to Make 3D Elastomeric Structures
Stephen A. Morin et al.
ADVANCED MATERIALS (2014)
Discrete elements for 3D microfluidics
Krisna C. Bhargava et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)
Modular microfluidic systems using reversibly attached PDMS fluid control modules
Peder Skafte-Pedersen et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2013)
The past, present and potential for microfluidic reactor technology in chemical synthesis
Katherine S. Elvira et al.
NATURE CHEMISTRY (2013)
Scale-up and control of droplet production in coupled microfluidic flow-focusing geometries
Molly K. Mulligan et al.
MICROFLUIDICS AND NANOFLUIDICS (2012)
Configurable 3D-Printed millifluidic and microfluidic 'lab on a chip' reactionware devices
Philip J. Kitson et al.
LAB ON A CHIP (2012)
Integrated 3D-printed reactionware for chemical synthesis and analysis
Mark D. Symes et al.
NATURE CHEMISTRY (2012)
Let there be chip-towards rapid prototyping of microfluidic devices: one-step manufacturing processes
Ansgar Waldbaur et al.
ANALYTICAL METHODS (2011)
Flexible casting of modular self-aligning microfluidic assembly blocks
Sean M. Langelier et al.
LAB ON A CHIP (2011)
Optofluidic microsystems for chemical and biological analysis
Xudong Fan et al.
NATURE PHOTONICS (2011)
Two-step photolithography to fabricate multilevel microchannels
Sungyoung Choi et al.
BIOMICROFLUIDICS (2010)
Bubble generation and transport in a microfluidic device with high aspect ratio
Renqiang Xiong et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2009)
A chaotic serpentine mixer efficient in the creeping flow regime: from design concept to optimization
Tae Gon Kang et al.
MICROFLUIDICS AND NANOFLUIDICS (2009)
Multidimensional modular microfluidic system
Po Ki Yuen et al.
LAB ON A CHIP (2009)
Impact of inlet channel geometry on microfluidic drop formation
A. R. Abate et al.
PHYSICAL REVIEW E (2009)
Stability of ABS Compounds Subjected to Repeated Cycles of Extrusion Processing
E. -K. Karahaliou et al.
POLYMER ENGINEERING AND SCIENCE (2009)
Emulsification in a microfluidic flow-focusing device: effect of the viscosities of the liquids
Zhihong Nie et al.
MICROFLUIDICS AND NANOFLUIDICS (2008)
Microfluidic assembly blocks
Minsoung Rhee et al.
LAB ON A CHIP (2008)
Microfluidic depletion of red blood cells from whole blood in high-aspect-ratio microchannels
Rainer D. Jaeggi et al.
MICROFLUIDICS AND NANOFLUIDICS (2007)
Developing optofluidic technology through the fusion of microfluidics and optics
Demetri Psaltis et al.
NATURE (2006)
Formation of droplets and bubbles in a microfluidic T-junction - scaling and mechanism of break-up
P Garstecki et al.
LAB ON A CHIP (2006)
Reactions in droplets in microflulidic channels
Helen Song et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2006)
A modular microfluidic architecture for integrated biochemical analysis
KA Shaikh et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2005)
A rapid three-dimensional vortex micromixer utilizing self-rotation effects under low Reynolds number conditions
CH Lin et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)
Monodisperse double emulsions generated from a microcapillary device
AS Utada et al.
SCIENCE (2005)
Disposable microfluidic devices: fabrication, function, and application
GS Fiorini et al.
BIOTECHNIQUES (2005)
A novel high aspect ratio microfluidic design to provide a stable and uniform microenvironment for cell growth in a high throughput mammalian cell culture array
PJ Hung et al.
LAB ON A CHIP (2005)
Microfluidic systems for chemical kinetics that rely on chaotic mixing in droplets
MR Bringer et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2004)
Formation of droplets and mixing in multiphase microfluidics at low values of the Reynolds and the capillary numbers
JD Tice et al.
LANGMUIR (2003)
Formation of dispersions using flow focusing in microchannels
SL Anna et al.
APPLIED PHYSICS LETTERS (2003)
Micro total analysis systems. 1. Introduction, theory, and technology
DR Reyes et al.
ANALYTICAL CHEMISTRY (2002)
Prototyping of microfluidic devices in poly(dimethylsiloxane) using solid-object printing
JC McDonald et al.
ANALYTICAL CHEMISTRY (2002)
Fabrication of topologically complex three-dimensional microfluidic systems in PDMS by rapid prototyping
JR Anderson et al.
ANALYTICAL CHEMISTRY (2000)
Three-dimensional micro-channel fabrication in polydimethylsiloxane (PDMS) elastomer
BH Jo et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2000)