Feasibility of pico-hydro and photovoltaic hybrid power systems for remote villages in Cameroon

Pico-hydro (pH) and photovoltaic (PV) hybrid systems incorporating a biogas generator have been simulated for remote villages in Cameroon using a load of 73 kWh/day and 8.3 kWp. Renewable energy systems were simulated using HOMER the load profile of a hostel in Cameroon, the solar insolation of Garoua and the flow of river Mungo. For a 40% increase in the cost of imported power system components, the cost of energy was found to be either 0.352 (sic)/kWh for a 5 kW pico-hydro generator with 72 kWh storage or 0.396 (sic)/kWh for a 3 kWp photovoltaic generator with 36 kWh storage. These energy costs were obtained with a biomass resource cost of 25 (sic)/tonne. The pH and PV hybrid systems both required the parallel, operation of a 3.3 kW battery inverter with a 10 kW biogas generator. The pH/biogas/battery systems simulated for villages located in the south of Cameroon with a flow rate of at least 92 l/s produced lower energy costs than PV/biogas/battery systems simulated for villages in the north of Cameroon with an insolation level of at least 5.55 kWh/m(2)/day. For a single-wire grid extension cost of 5000 (sic)/km, operation and maintenance costs of 125 (sic)/yr/km and a grid power price of 0.1 (sic)/kWh, the breakeven grid extension distances were found to be 12.9 km for pH/biogas/battery systems and 15.2 km for PV/biogas/battery systems respectively. Investments in biogas based renewable energy systems could thus be considered in the National Energy Action Plan of Cameroon for the supply of energy to key sectors involved in poverty alleviation. (c) 2008 Elsevier Ltd. All rights reserved.