Related references
Note: Only part of the references are listed.Morphology Development in Amorphous Polymer: Fullerene Photovoltaic Blend Films During Solution Casting
Andrew J. Pearson et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
A Mechanistic Understanding of Processing Additive-Induced Efficiency Enhancement in Bulk Heterojunction Organic Solar Cells
Kristin Schmidt et al.
ADVANCED MATERIALS (2014)
Effect of the Fibrillar Microstructure on the Efficiency of High Molecular Weight Diketopyrrolopyrrole-Based Polymer Solar Cells
Weiwei Li et al.
ADVANCED MATERIALS (2014)
Elucidating Double Aggregation Mechanisms in the Morphology Optimization of Diketopyrrolopyrrole-Based Narrow Bandgap Polymer Solar Cells
Jing Gao et al.
ADVANCED MATERIALS (2014)
Molecular Design and Morphology Control Towards Efficient Polymer Solar Cells Processed using Non-aromatic and Non-chlorinated Solvents
Yu Chen et al.
ADVANCED MATERIALS (2014)
A thienylenevinylene-phthalimide copolymer based polymer solar cell with high open circuit voltage: Effect of additive concentration on the open circuit voltage
Juhwan Kim et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2014)
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Yuhang Liu et al.
NATURE COMMUNICATIONS (2014)
Understanding the Morphology of PTB7: PCBM Blends in Organic Photovoltaics
Feng Liu et al.
ADVANCED ENERGY MATERIALS (2014)
Controlling Solution-Phase Polymer Aggregation with Molecular Weight and Solvent Additives to Optimize Polymer-Fullerene Bulk Heterojunction Solar Cells
Jonathan A. Bartelt et al.
ADVANCED ENERGY MATERIALS (2014)
Effect of processing additive on morphology and charge extraction in bulk-heterojunction solar cells
Dong Hwan Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Spin-Cast Bulk Heterojunction Solar Cells: A Dynamical Investigation
Kang Wei Chou et al.
ADVANCED MATERIALS (2013)
High-Molecular-Weight Regular Alternating Diketopyrrolopyrrole-based Terpolymers for Efficient Organic Solar Cells
Koen H. Hendriks et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cells
Chu-Chen Chueh et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Predicting Morphologies of Solution Processed Polymer:Fullerene Blends
Sandra Kouijzer et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Additives for morphology control in high-efficiency organic solar cells
Hsueh-Chung Liao et al.
MATERIALS TODAY (2013)
Determining the optimum morphology in high-performance polymer-fullerene organic photovoltaic cells
Gordon J. Hedley et al.
NATURE COMMUNICATIONS (2013)
Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells
Brian A. Collins et al.
ADVANCED ENERGY MATERIALS (2013)
Effect of Processing Additives on the Solidification of Blade-Coated Polymer/Fullerene Blend Films via In-Situ Structure Measurements
Nayool Shin et al.
ADVANCED ENERGY MATERIALS (2013)
Efficient Polymer Solar Cells Based on a Low Bandgap Semi-crystalline DPP Polymer-PCBM Blends
Feng Liu et al.
ADVANCED MATERIALS (2012)
Solution Processed Polymer Tandem Solar Cell Using Efficient Small and Wide bandgap Polymer:Fullerene Blends
Veronique S. Gevaerts et al.
ADVANCED MATERIALS (2012)
Molecular solubility and hansen solubility parameters for the analysis of phase separation in bulk heterojunctions
Duc T. Duong et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2012)
On the morphology of polymer-based photovoltaics
Feng Liu et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2012)
High-efficiency inverted dithienogermole-thienopyrrolodione-based polymer solar cells
Cephas E. Small et al.
NATURE PHOTONICS (2012)
Degradation mechanisms in organic photovoltaic devices
Nadia Grossiord et al.
ORGANIC ELECTRONICS (2012)
An isoindigo and dithieno[3,2-b:2 ',3 '-d]silole copolymer for polymer solar cells
Romain Stalder et al.
POLYMER CHEMISTRY (2012)
Multi-Length-Scale Morphologies in PCPDTBT/PCBM Bulk-Heterojunction Solar Cells
Yu Gu et al.
ADVANCED ENERGY MATERIALS (2012)
Moving through the Phase Diagram: Morphology Formation in Solution Cast Polymer-Fullerene Blend Films for Organic Solar Cells
Benjamin Schmidt-Hansberg et al.
ACS NANO (2011)
Dithienogermole As a Fused Electron Donor in Bulk Heterojunction Solar Cells
Chad M. Amb et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Effects of Additives on the Morphology of Solution Phase Aggregates Formed by Active Layer Components of High-Efficiency Organic Solar Cells
Sylvia J. Lou et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
ITO-free flexible organic solar cells with printed current collecting grids
Yulia Galagan et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules
Suren A. Gevorgyan et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Efficient Solar Cells Based on an Easily Accessible Diketopyrrolopyrrole Polymer
Johan C. Bijleveld et al.
ADVANCED MATERIALS (2010)
Morphological Device Model for Organic Bulk Heterojunction Solar Cells
K. Maturova et al.
NANO LETTERS (2009)
All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps
Frederik C. Krebs
ORGANIC ELECTRONICS (2009)
Narrow-bandgap diketo-pyrrolo-pyrrole polymer solar cells: The effect of processing on the performance
Martijn M. Wienk et al.
ADVANCED MATERIALS (2008)
Processing additives for improved efficiency from bulk heterojunction solar cells
Jae Kwan Lee et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
Transition from Solution to the Solid State in Polymer Solar Cells Cast from Mixed Solvents
Jeffrey Peet et al.
MACROMOLECULES (2008)
Morphology and phase segregation of spin-casted films of Polyfluorene/PCBM blends
Svante Nilsson et al.
MACROMOLECULES (2007)
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
J. Peet et al.
NATURE MATERIALS (2007)
An interfacial instability in a transient wetting layer leads to lateral phase separation in thin spin-cast polymer-blend films
SY Heriot et al.
NATURE MATERIALS (2005)