Impact of nitric oxide on n-heptane and n-dodecane autoignition in a new high-pressure and high-temperature chamber

A New One Shot Engine (NOSE) was designed to simulate the thermodynamic conditions at High Pressure-High Temperature like an actual common-rail diesel engine in order to study the compression ignition of spray. The volume of the combustion chamber provided with large optical windows simplified the implementation of various optical diagnostics. The advantage of this kind of set-up in comparison to pre-burn or flue chambers is that the initial gas mixture can be well controlled in terms of species and mole fraction. The purpose of this work was to investigate the impact of nitric oxide (NO) on ignition delay (ID) for two fuels with different cetane numbers: n-heptane, and n-dodecane. In the thermodynamic conditions chosen (60 bar and over 800-900 K), NO had a strong effect on ID, with increases in NO tending to reduce the ignition delay. Results showed that ID and Lift-Off Length (LOL) presented the same trend as a function of temperature and NO concentration. Experimentally, at 900 K the ignition of n-dodecane was promoted by NO up to 100 ppm, whilst higher NO levels did not further promote ignition and a stabilization of the value has been noticed. For n-heptane, stronger promoting effects were observed in the same temperature conditions: the ignition delays were monotonically reduced with up to 200 ppm NO addition. At a lower temperature (800 K) the inhibiting effect was observed for n-dodecane for [NO] greater than 40 ppm, whereas only a promoting effect was observed for n-heptane. The experimental results of LOL showed that NO shortened LOL in almost all cases, and this varied with both the NO concentration and the mixture temperature. Thus, fuels with shorter ignition delays produce shorter lift-off lengths. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.