Related references
Note: Only part of the references are listed.Epoxy clay nanocomposites - processing, properties and applications: A review
Asif Abdul Azeez et al.
COMPOSITES PART B-ENGINEERING (2013)
Utilization of CO2 and biomass char derived from pyrolysis of Dunaliella salina: The effects of steam and catalyst on CO and H2 gas production
Chao Yang et al.
BIORESOURCE TECHNOLOGY (2012)
Impact of pyrolysis temperature and manure source on physicochemical characteristics of biochar
Keri B. Cantrell et al.
BIORESOURCE TECHNOLOGY (2012)
The effect of N2/CO2/O2 content and pressure on characteristics and CO2 gasification behavior of biomass-derived char
Toshiaki Hanaoka et al.
FUEL PROCESSING TECHNOLOGY (2012)
Synthesis and Properties of Composites of Oligoazomethine with Char
Ilkay Ozaytekin et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Multiwalled carbon nanotubes-reinforced isotactic polypropylene nanocomposites: Enhancement of crystallization and mechanical, thermal, and electrical properties
Md Akramul Haque et al.
POLYMER COMPOSITES (2012)
Electrical conductivity of polyurethane/MWCNT nanocomposite foams
N. Athanasopoulos et al.
POLYMER COMPOSITES (2012)
Influence of ammonium polyphosphate-/poly(acrylic acid)-based layer by layer architectures on the char formation in cotton, polyester and their blends
Jenny Alongi et al.
POLYMER DEGRADATION AND STABILITY (2012)
Microwave-assisted pyrolysis of microalgae for biofuel production
Zhenyi Du et al.
BIORESOURCE TECHNOLOGY (2011)
Modeling and evaluation of chromium remediation from water using low cost bio-char, a green adsorbent
Dinesh Mohan et al.
JOURNAL OF HAZARDOUS MATERIALS (2011)
Hydrogen-rich gas production by steam gasification of char from biomass fast pyrolysis in a fixed-bed reactor: Influence of temperature and steam on hydrogen yield and syngas composition
Feng Yan et al.
BIORESOURCE TECHNOLOGY (2010)
The mechanical properties of carbonized coconut char powder-based friction materials
M. Sutikno et al.
CARBON (2010)
Intrinsic char reactivity of plastic waste (PET) during CO2 gasification
M. V. Gil et al.
FUEL PROCESSING TECHNOLOGY (2010)
Dispersion of Multiwalled Carbon Nanotubes in Thermoplastic Elastomer Gels: Morphological, Rheological, and Electrical Properties
Marissa A. Paglicawan et al.
POLYMER COMPOSITES (2010)
Pyrolysis of the rejects of a waste packaging separation and classification plant
I. de Marco et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)
Pyrolytic characteristics of pine wood in a slowly heating and gas sweeping fixed-bed reactor
Zhenya Wang et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)
Pyrolysis of various biomass residues and char utilization for the production of activated carbons
J. F. Gonzalez et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)
Variation in the degree of aromatic condensation of chars
Anna V. McBeath et al.
ORGANIC GEOCHEMISTRY (2009)
An Investigation on the Rheology, Morphology, Thermal and Mechanical Properties of Recycled Poly (ethylene terephthalate) Reinforced With Modified Short Glass Fibers
I. Rezaeian et al.
POLYMER COMPOSITES (2009)
Production of bio-oil from rice straw and bamboo sawdust under various reaction conditions in a fast pyrolysis plant equipped with a fluidized bed and a char separation system
Su-Hwa Jung et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2008)
Study of arsenic(V) adsorption on bone char from aqueous solution
Yun-Nen Chen et al.
JOURNAL OF HAZARDOUS MATERIALS (2008)
Synthesis and properties of epoxy/layered zirconium phosphonate (Zr-P) nanocomposites
Tsung-Yen Tsai et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2008)
Silicon-doped carbon semiconductor from rice husk char
Subarna Maid et al.
MATERIALS CHEMISTRY AND PHYSICS (2008)
Microcompounding of organoclay-ABS/PA6 blend-based nanocomposites
Guralp Ozkoc et al.
POLYMER COMPOSITES (2008)
Effect of glass fibers on rheology, mechanical properties of recycled thermal and PET
Milan Kracalik et al.
POLYMER COMPOSITES (2008)
Thermal decomposition mechanisms common to polyurethane, epoxy, poly(diallyl phthalate), polycarbonate and poly(phenylene sulfide)
K. L. Erickson
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2007)
Recycling of automobile shredder residues by means of pyrolysis
I. de Marco et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2007)
Sorption of cadmium, copper, and zinc ions onto bone char using Crank diffusion model
KKH Choy et al.
CHEMOSPHERE (2005)
Electrical conductivity study of porous carbon composite derived from rice husk
LJ Kennedy et al.
MATERIALS CHEMISTRY AND PHYSICS (2005)
Evaluating phenanthrene sorption on various wood chars
G James et al.
WATER RESEARCH (2005)
Characterization of the liquid products obtained in tyre pyrolysis
MF Laresgoiti et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)
Heat-treatment of carbon blacks obtained by pyrolysis of used tires. Effect on the surface chemistry, porosity and electrical conductivity
D Pantea et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2003)
Analysis of correlation between percolation concentration and elongation at break in filled electroconductive epoxy-based adhesives
I Novák et al.
EUROPEAN POLYMER JOURNAL (2003)
Electrical and mechanical properties of functionally graded epoxy-resin/carbon fibre composites
P Tsotra et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Effect of polymeric structure on the corrosion protection of epoxy coatings
SY Zhang et al.
CORROSION SCIENCE (2002)
Preparation and properties of montmorillonite/organo-soluble polyimide hybrid materials prepared by a one-step approach
JC Huang et al.
JOURNAL OF MATERIALS SCIENCE (2001)