4.7 Article

Effect of silica nanoparticle size on toughening mechanisms of filled epoxy

Journal

POLYMER
Volume 53, Issue 9, Pages 1890-1905

Publisher

ELSEVIER SCI LTD
DOI: 10.1016/j.polymer.2012.02.052

Keywords

Epoxy resin; Matrix shearbanding; Silica nanoparticles

Funding

  1. Semiconductor Research Corporation (SRC) [1292.027]
  2. Royal Thai Fellowship

Ask authors/readers for more resources

The addition of silica nanoparticles (23 nm, 74 nm, and 170 nm) to a lightly crosslinked, model epoxy resin, was studied. The effect of silica nanoparticle content and particle size on glass transition temperature (T-g), coefficient of thermal expansion (CTE), Young's modulus (E), yield stress (sigma), fracture energy (G(IC)) and fracture toughness (K-IC), were investigated. The toughening mechanisms were determined using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and transmission optical microscopy (TOM). The experimental results revealed that the addition of silica nanoparticles did not have a significant effect on T-g or the yield stress of epoxy resin, i.e. the yield stress and T-g remained constant regardless of silica nanoparticle size. As expected, the addition of silica nanoparticles had a significant impact on CTE, modulus and fracture toughness. The CTE values of nanosilica-filled epoxies were found to decrease with increasing silica nanoparticle content, which can be attributed to the much lower CTE of the silica nanoparticles. Interestingly, the decreases in CTE showed strong particle size dependence. The Young's modulus was also found to significantly improve with addition of silica nanoparticles and increase with increasing filler content. However, the particle size did not exhibit any effect on the Young's modulus. Finally, the fracture toughness and fracture energy showed significant improvements with the addition of silica nanoparticles, and increased with increasing filler content. The effect of particle size on fracture toughness was negligible. Observation of the fracture surfaces using SEM and TOM showed evidence of debonding of silica nanoparticles, matrix void growth, and matrix shear banding, which are credited for the increases in toughness for nanosilica-filled epoxy systems. Shear banding mechanism was the dominant mechanism while the particle debonding and plastic void growth were the minor mechanisms. Published by Elsevier Ltd.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available