Related references
Note: Only part of the references are listed.Surface analysis, hydrophilic enhancement, ageing behavior and flow in plasma modified cyclic olefin copolymer (COC)-based microfluidic devices
Sunanda Roy et al.
SENSORS AND ACTUATORS B-CHEMICAL (2010)
Surface modification of polymers using a multi-step plasma treatment
Myoung-Woon Moon et al.
SCRIPTA MATERIALIA (2009)
Influence of oxygen and nitrogen plasma treatment on polyethylene terephthalate (PET) polymers
Ita Junkar et al.
VACUUM (2009)
Microfluidic immunosensor based on stable antibody-patterned surface in PMMA microchip
Huixiang Wang et al.
ELECTROCHEMISTRY COMMUNICATIONS (2008)
Plasma processing for polymeric microfluidics fabrication and surface modification: Effect of super-hydrophobic walls on electroosmotic flow
N. Vourdas et al.
MICROELECTRONIC ENGINEERING (2008)
Surface modification of cyclic olefin copolymer substrate by oxygen plasma treatment
Shug-June Hwang et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Surface modification of a polyurethane film by low pressure glow discharge oxygen plasma treatment
M. R. Sanchis et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Hydrophilic surface modification of cyclic olefin copolymer microfluidic chips using sequential photografting
Timothy B. Stachowiak et al.
JOURNAL OF SEPARATION SCIENCE (2007)
Surface modification of polymers by atomic oxygen using ECR plasma
Riyadh M. A. Abdul majeed et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2007)
Using a He+N2 dielectric barrier discharge for the modification of polymer surface properties
G. Borcia et al.
PLASMA SOURCES SCIENCE & TECHNOLOGY (2006)
Effects of fabrication process parameters on the properties of cyclic olefin copolymer microfluidic devices
Carl K. Fredrickson et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2006)
Covalent micropatterning of poly(dimethylsiloxane) by photografting through a mask
YL Wang et al.
ANALYTICAL CHEMISTRY (2005)
Enhancement of the molecular nitrogen dissociation and ionization levels by argon mixture in flue nitrogen plasma
JY Liu et al.
CURRENT APPLIED PHYSICS (2005)
The zeta potential of cyclo-olefin polymer microchannels and its effects on insulative (electrodeless) dielectrophoresis particle trapping devices
P Mela et al.
ELECTROPHORESIS (2005)
An integrated microfluidic device in polyester for electrophoretic analysis of amino acids
YL Guo et al.
ELECTROPHORESIS (2005)
Dynamic protein adsorption in microchannels by stop-flow and continuous flow
A Lionello et al.
LAB ON A CHIP (2005)
Detection of human immunoglobulin in microchip and conventional capillary electrophoresis with contactless conductivity measurements
EM Abad-Villar et al.
ANALYTICAL CHEMISTRY (2004)
UV/ozone modification of poly(dimethylsiloxane) microfluidic channels
Y Berdichevsky et al.
SENSORS AND ACTUATORS B-CHEMICAL (2004)
Rapid prototyping of thermoset polyester microfluidic devices
GS Fiorini et al.
ANALYTICAL CHEMISTRY (2004)
Surface modification of cycloolefinic copolymers for optimization of the adhesion to metals
D Nikolova et al.
SURFACE AND INTERFACE ANALYSIS (2004)
Surface-modified poly(methyl methacrylate) capillary electrophoresis microchips for protein and peptide analysis
JK Liu et al.
ANALYTICAL CHEMISTRY (2004)
Cationic starch derivatives as dynamic coating additives for analysis of amino acids and peptides using poly(methyl methacrylate) microfluidic devices
M Kato et al.
ANALYTICAL CHEMISTRY (2004)
Pull-off test in the assessment of adhesion at printed wiring board metallisation/epoxy interface
MPK Turunen et al.
MICROELECTRONICS RELIABILITY (2004)
A flexible sample introduction method for polymer microfluidic chips using a push/pull pressure pump
ZY Wu et al.
LAB ON A CHIP (2004)
Disposable Smart lab on a chip for point-of-care clinical diagnostics
CH Ahn et al.
PROCEEDINGS OF THE IEEE (2004)
Silica nanocasting of simple cellulose derivatives: Towards chiral pore systems with long-range order and chiral optical coatings
A Thomas et al.
ADVANCED FUNCTIONAL MATERIALS (2003)
Integrating polymerase chain reaction, valving, and electrophoresis in a plastic device for bacterial detection
CG Koh et al.
ANALYTICAL CHEMISTRY (2003)
Solid-phase reversible immobilization in microfluidic chips for the purification of dye-labeled DNA sequencing fragments
YC Xu et al.
ANALYTICAL CHEMISTRY (2003)
Tandem isotachophoresis-zone electrophoresis via base-mediated destacking for increased detection sensitivity in microfluidic systems
WN Vreeland et al.
ANALYTICAL CHEMISTRY (2003)
A comparison of PE surfaces modified by plasma generated neutral nitrogen species and nitrogen ions
AJ Wagner et al.
PLASMAS AND POLYMERS (2003)
Surface functionalization of thermoplastic polymers for the fabrication of microfluidic devices by photoinitiated grafting
T Rohr et al.
ADVANCED FUNCTIONAL MATERIALS (2003)
Microarrays assembled in microfluidic chips fabricated from poly(methyl methacrylate) for the detection of low-abundant DNA mutations
Y Wang et al.
ANALYTICAL CHEMISTRY (2003)
Surface modification of a segmented polyetherurethane using a low-powered gas plasma and its influence on the activation of the coagulation system
DJ Wilson et al.
BIOMATERIALS (2003)
Influence of master fabrication techniques on the characteristics of embossed microfluidic channels
MB Esch et al.
LAB ON A CHIP (2003)
Surface modification of spin-coated high-density polyethylene films by argon and oxygen glow discharge plasma treatments
SK Oiseth et al.
APPLIED SURFACE SCIENCE (2002)
Characterization of air plasma-treated polymer surfaces by ESCA and contact angle measurements for optimization of surface stability and cell growth
BL Johansson et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Fabrication of microchannel structures in fluorinated ethylene propylene
E Sahlin et al.
ANALYTICAL CHEMISTRY (2002)
Cell lysis and protein extraction in a microfluidic device with detection by a fluorogenic enzyme assay
EA Schilling et al.
ANALYTICAL CHEMISTRY (2002)
Surface characterization of laser-ablated polymers used for microfluidics
DL Pugmire et al.
ANALYTICAL CHEMISTRY (2002)
Hot embossing in microfabrication. Part I: Experimental
YJ Juang et al.
POLYMER ENGINEERING AND SCIENCE (2002)
CO2-laser micromachining and back-end processing for rapid production of PMMA-based microfluidic systems
H Klank et al.
LAB ON A CHIP (2002)
Design and Fabrication of CD-Like Microfluidic Platforms for Diagnostics: Polymer-Based Microfabrication
L. James Lee et al.
BIOMEDICAL MICRODEVICES (2001)
Microfabricated polycarbonate CE devices for DNA analysis
YJ Liu et al.
ANALYTICAL CHEMISTRY (2001)
Optical properties of cyclic olefin copolymers
G Khanarian et al.
OPTICAL ENGINEERING (2001)
A new PMMA-microchip device for isotachophoresis with integrated conductivity detector
B Grass et al.
SENSORS AND ACTUATORS B-CHEMICAL (2001)
Rapid, parallel separations of D1S80 alleles in a plastic microchannel chip
AP Sassi et al.
JOURNAL OF CHROMATOGRAPHY A (2000)
Platelet adhesion onto segmented polyurethane film surfaces modified by addition and crosslinking of PEO-containing block copolymers
JH Lee et al.
BIOMATERIALS (2000)
Share Paper
