Enhancing the electrochemical kinetics of high voltage olivine LiMnPO4 by isovalent co-doping

We report here doping of Fe2+ and/or Mg2+ in LiMnPO4 cathode material to enhance its lithium storage performance and appraise the effect of doping. For this purpose, LiMn(0.9)Fe((0.1-x))MgxPO(4)/C (x = 0 and 0.05) and LiMn0.95Mg0.05PO4/C have been prepared by a ball mill assisted soft template method. These materials were prepared with similar morphology, particle size and carbon content. Amongst them, the isovalent co-doped LiMn0.9Fe0.05Mg0.05PO4/C sample shows better electrochemical performance compared to LiMn0.9Fe0.1PO4/C and LiMn0.95Mg0.05PO4/C samples. For instance, a lithium storage capacity of 159 mA h g(-1) is obtained at 0.1 C for LiMn0.9Fe0.05Mg0.05PO4/C material with a relatively low polarization of similar to 139 mV. This is in sharp contrast to LiMn0.9Fe0.1PO4/C and LiMn0.95Mg0.05PO4/C which show only 136.8 and 128.4 mA h g-1 at 0.1 C with the polarization of B222 and 334 mV respectively. Further, the LiMn0.95Mg0.05PO4/C electrode delivers discharge capacities of 155.8, 141.4, 118.8, 104.6, 81.4 and 51.8 mA h g(-1) at 0.2, 0.5, 1, 2, 5 and 10 C respectively. This electrode material also retains a capacity of 116 mA h g(-1) at 1 C after 200 cycles, which is 96% of its initial capacity. Such improved cycling stability of LiMn0.95Mg0.05PO4/C is attributed to the suppressed Mn dissolution in the electrolyte compared to the other samples. Further, during the Li extraction process, delithiated phases created from the Fe2+/Fe3+ redox reaction (similar to 3.45 V) favor enhanced electrochemical activity of the succeeding Mn2+/Mn3+ redox couples. The fully charged state (4.6 V) contains a partially lithiated phase owing to the presence of electrochemically inactive Mg2+. The presence of such lithiated phase provides a favourable environment for the subsequent lithium insertion process. We also observe improved electronic conductivity and Li-ion diffusion for the co-doped sample compared to LiMnPO4 doped with either Fe2+ or Mg2+ by impedance measurements. The improved storage performance of co-doped LiMnPO4 is thus explained in terms of (i) favorable extraction and insertion reactions and (ii) enhanced transport properties.