Journal
THIN SOLID FILMS
Volume 578, Issue -, Pages 76-82Publisher
ELSEVIER SCIENCE SA
DOI: 10.1016/j.tsf.2015.02.015
Keywords
Flexible substrate; Indium tin oxide; Laser sintering; Nanoparticle; Thermal damage; Thin films
Categories
Funding
- NRF Basic Research Program [20100017848, 2014R1A2A1A11049453]
- Korean Ministry of Trade, Industry and Energy [10048726]
- National Research Foundation of Korea [2014R1A2A1A11049453] Funding Source: Korea Institute of Science & Technology Information (KISTI), National Science & Technology Information Service (NTIS)
Ask authors/readers for more resources
Technology to fabricate electrically-conducting, transparent thin-film patterns on flexible substrates has possible applications in flexible electronics. In this work, a pulsed-laser sintering process applicable to indium tin oxide (ITO) thin-film fabrication on a substrate without thermal damage to the substrate was developed. A nanosecond pulsed laser was used to minimize thermal penetration into the substrate and to control the thickness of the sintered layer. ITO nanoparticles (NPs) of similar to 20 nm diameter were used to lower the process temperature by exploiting their low melting point. ITO thin film patterns were fabricated by first spin coating the NPs onto a surface, then sintering them using a KrF excimer laser. The sintered films were characterized using field emission scanning electron microscopy. The electrical resistivity and transparency of the film were measured by varying the process parameters. A single laser pulse could generate the polycrystalline structure (average grain size similar to 200 nm), reducing the electrical resistivity of the film by a factor of similar to 1000. The sintering process led to a minimum resistivity of 1.1 x 10(-4) Omega.m without losing the transparency of the film. The thickness of the sintered layer could be varied up to 150 nm by adjusting the laser fluence. Because the estimated thermal penetration depth in the ITO film was less than 200 nm, no thermal damage was observed in the substrate. This work suggests that the proposed process, combined with various particle deposition methods, can be an effective tool to form thin-film ITO patterns on flexible substrates. (C) 2015 Elsevier B.V. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available