Related references
Note: Only part of the references are listed.Cracks at elliptical holes: Stress intensity factor and Finite Fracture Mechanics solution
P. Weissgraeber et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2016)
Bending moment calculation for single lap joints with composite laminate adherends including bending-extensional coupling
A. Talmon l'Armee et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
A new scaled boundary finite element formulation for the computation of singularity orders at cracks and notches in arbitrarily laminated composites
Rolf Dieringer et al.
COMPOSITE STRUCTURES (2015)
A model for brittle failure in adhesive lap joints of arbitrary joint configuration
N. Stein et al.
COMPOSITE STRUCTURES (2015)
A model for the prediction of debond onset in spherical-particle-reinforced composites under tension. Application of a coupled stress and energy criterion
I. G. Garcia et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
On degradation functions in phase field fracture models
Charlotte Kuhn et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
Comparison between models based on a coupled criterion for the prediction of the failure of adhesively bonded joints
N. Carrere et al.
ENGINEERING FRACTURE MECHANICS (2015)
Finite fracture mechanics analysis using the scaled boundary finite element method
Zhicheng Sun et al.
ENGINEERING FRACTURE MECHANICS (2015)
Detection of crack onset in double cleavage drilled specimens of plaster under compression by digital image correlation - Theoretical predictions based on a coupled criterion
R. Romani et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2015)
Debonding at the fibre-matrix interface under remote transverse tension. One debond or two symmetric debonds?
I. G. Garcia et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2015)
Application of the coupled stress-energy criterion to predict the fracture behaviour of layered ceramics designed with internal compressive stresses
D. Leguillon et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2015)
Crack initiation in single lap joints: effects of geometrical and material properties
Philipp Weissraeber et al.
INTERNATIONAL JOURNAL OF FRACTURE (2015)
Analysis of the effect of a stress raiser on the strength of a UD flax/epoxy composite in off-axis tension
J. Modniks et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Modelling fibre-matrix debonding under biaxial loading
P. A. Carraro et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Phase field approximation of dynamic brittle fracture
Alexander Schlueter et al.
COMPUTATIONAL MECHANICS (2014)
Asymptotic analysis of the potential energy difference because of a crack at a V-notch edge in a 3D domain
Brigit Mittelman et al.
ENGINEERING FRACTURE MECHANICS (2014)
Fiber-size effects on the onset of fiber-matrix debonding under transverse tension: A comparison between cohesive zone and finite fracture mechanics models
I. G. Garcia et al.
ENGINEERING FRACTURE MECHANICS (2014)
A coupled stress and energy criterion for the assessment of crack initiation in single lap joints: A numerical approach
S. Hell et al.
ENGINEERING FRACTURE MECHANICS (2014)
A general sandwich-type model for adhesive joints with composite adherends
P. Weissgraeber et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
An extended high order cohesive interface approach to the debonding analysis of FRP strengthened beams
Oded Rabinovitch
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2014)
Transverse crack onset and growth in cross-ply [0/90]s laminates under tension. Application of a coupled stress and energy criterion
I. G. Garcia et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)
A comparison among some recent energy- and stress-based criteria for the fracture assessment of sharp V-notched components under Mode I loading
P. Lazzarin et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
An attempt to extend the 2D coupled criterion for crack nucleation in brittle materials to the 3D case
D. Leguillon
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
Phase-field modeling of fracture in linear thin shells
F. Amiri et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
Simulation of size effects by a phase field model for fracture
Charlotte Kuhn et al.
THEORETICAL AND APPLIED MECHANICS LETTERS (2014)
Size effects on the tensile and compressive failure of notched composite laminates
G. H. Ercin et al.
COMPOSITE STRUCTURES (2013)
A semi-analytical method to predict net-tension failure of mechanically fastened joints in composite laminates
G. Catalanotti et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Notched response of non-crimp fabric thin-ply laminates: Analysis methods
A. Arteiro et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
A simple model of thermal crack pattern formation using the coupled criterion
Dominique Leguillon
COMPTES RENDUS MECANIQUE (2013)
Influence of the adhesive thickness on a debonding - An asymptotic model
A. Moradi et al.
ENGINEERING FRACTURE MECHANICS (2013)
A Finite Fracture Mechanics approach to V-notched elements subjected to mixed-mode loading
Alberto Sapora et al.
ENGINEERING FRACTURE MECHANICS (2013)
A phase field model of dynamic fracture: Robust field updates for the analysis of complex crack patterns
M. Hofacker et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2013)
A phase-field model for cohesive fracture
Clemens V. Verhoosel et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2013)
Strength prediction of bonded assemblies using a coupled criterion under elastic assumptions: Effect of material and geometrical parameters
A. Moradi et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Interfacial failure in adhesive joints: Experiments and predictions
Luis Ernesto Mendoza-Navarro et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer
R. D. S. G. Campilho et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
The strengthening effect caused by an elastic contrast-part II: stratification by a thin stiff layer
Dominique Leguillon et al.
INTERNATIONAL JOURNAL OF FRACTURE (2013)
The strengthening effect caused by an elastic contrast-part I: the bimaterial case
Dominique Leguillon et al.
INTERNATIONAL JOURNAL OF FRACTURE (2013)
Tight sedimentary covers for CO sequestration
D. Leguillon et al.
INTERNATIONAL JOURNAL OF FRACTURE (2013)
Finite Fracture Mechanics model for mixed mode fracture in adhesive joints
P. Weissgraeber et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Mode mixity and size effect in V-notched structures
P. Cornetti et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Closed-form solutions for stress singularities at plane bi- and trimaterial junctions
C. Sator et al.
ARCHIVE OF APPLIED MECHANICS (2012)
A finite fracture mechanics model for the prediction of the open-hole strength of composite laminates
P. P. Camanho et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Non-linear macroscopic response of fiber-reinforced composite materials due to initiation and propagation of interface cracks
Fabrizio Greco et al.
ENGINEERING FRACTURE MECHANICS (2012)
Analysis of notch effect in PMMA using the Theory of Critical Distances
S. Cicero et al.
ENGINEERING FRACTURE MECHANICS (2012)
A Finite Fracture Mechanics approach to the asymptotic behaviour of U-notched structures
A. Carpinteri et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2012)
Parametric study of adhesive joints with composites
J. A. B. P. Neto et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2012)
Computation of 3-D stress singularities for multiple cracks and crack intersections by the scaled boundary finite element method
Sanjib Goswami et al.
INTERNATIONAL JOURNAL OF FRACTURE (2012)
Mixed-mode crack initiation at a v-notch in presence of an adhesive joint
I. G. Garcia et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Delaminated multilayered plates under uniaxial extension. Part I: Analytical analysis using a layerwise stress approach
Navid Saeedi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Crack onset and growth at the fibre-matrix interface under a remote biaxial transverse load. Application of a coupled stress and energy criterion
V. Mantic et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Delaminated multilayered plates under uniaxial extension. Part II: Efficient layerwise mesh strategy for the prediction of delamination onset
Navid Saeedi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Finite Fracture Mechanics at elastic interfaces
P. Cornetti et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
A coupled strength and toughness criterion for the prediction of the open hole tensile strength of a composite plate
E. Martin et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Phase-field modeling of the coupled microstructure and fracture evolution in ferroelectric single crystals
Amir Abdollahi et al.
ACTA MATERIALIA (2011)
The problem of the critical angle for edge and center V-notched structures
Alberto Carpinteri et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2011)
Characteristics of the process zone at sharp notch roots
D. A. Hills et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
Kinking angles for interface cracks
M. R. Ayatollahi et al.
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11) (2011)
A New Finite Fracture Mechanics Approach for Assessing the Strength of Bonded Lap Joints
Philipp Weissgraeber et al.
COMPOSITE SCIENCE AND TECHNOLOGY, PTS 1 AND 2 (2011)
Finite fracture mechanics analysis of crack onset at a stress concentration in a UD glass/epoxy composite in off-axis tension
J. Andersons et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Investigation of combined stress state failure criterion for glass fiber/epoxy interface by the cruciform specimen method
Shinji Ogihara et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Modelling brittle crack formation at geometrical and material discontinuities using a finite fracture mechanics approach
Jochen Hebel et al.
ENGINEERING FRACTURE MECHANICS (2010)
A continuum phase field model for fracture
Charlotte Kuhn et al.
ENGINEERING FRACTURE MECHANICS (2010)
Static and fatigue failure of quasi-brittle materials at a V-notch using a Dugdale model
S. Murer et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2010)
Thermodynamically consistent phase-field models of fracture: Variational principles and multi-field FE implementations
C. Miehe et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2010)
Phase field simulation of domain structures in cracked ferroelectrics
Bai-Xiang Xu et al.
INTERNATIONAL JOURNAL OF FRACTURE (2010)
A twofold strength and toughness criterion for the onset of free-edge shear delamination in angle-ply laminates
E. Martin et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
Multiple failures in or around a stiff inclusion embedded in a soft matrix under a compressive loading
Daniel Quesada et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2009)
Analytical models of adhesively bonded joints-Part II: Comparative study
Lucas F. M. da Silva et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2009)
Analytical models of adhesively bonded joints-Part I: Literature survey
Lucas F. M. da Silva et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2009)
The role of the interbed thickness on the step-over fracture under overburden pressure
D. Quesada et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)
Interface crack onset at a circular cylindrical inclusion under a remote transverse tension. Application of a coupled stress and energy criterion
V. Mantic
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
Triggering of dry snow slab avalanches: stress versus fracture mechanical approach
B. M. Chiaia et al.
COLD REGIONS SCIENCE AND TECHNOLOGY (2008)
A finite fracture mechanics approach to structures with sharp V-notches
A. Carpinteri et al.
ENGINEERING FRACTURE MECHANICS (2008)
Crack deflection in a biaxial stress state
Dominique Leguillon et al.
INTERNATIONAL JOURNAL OF FRACTURE (2008)
Competition between deflection and penetration at an interface in the vicinity of a main crack
E. Martin et al.
INTERNATIONAL JOURNAL OF FRACTURE (2008)
The variational approach to fracture
Blaise Bourdin et al.
JOURNAL OF ELASTICITY (2008)
Numerical analysis of brittle crack initiation at stress concentrations in composites
Jochen Hebel et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2008)
Adhesive fracture of an epoxy joint under thermal and mechanical loadings
C. Henninger et al.
JOURNAL OF THERMAL STRESSES (2008)
Prediction of size effects in notched laminates using continuum damage mechanics
P. P. Camanho et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Crack initiation at a V-notch - comparison between a brittle fracture criterion and the Dugdale cohesive model
Carole Henninger et al.
COMPTES RENDUS MECANIQUE (2007)
New unified laws in fatigue: From the Wohler's to the Paris' regime
Nicola Pugno et al.
ENGINEERING FRACTURE MECHANICS (2007)
A general weight function for inclined cracks at sharp V-notches
M. Beghini et al.
ENGINEERING FRACTURE MECHANICS (2007)
T-Stresses across static crack kinking
Xian-Fang Li et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2007)
An experimental investigation into the tensile strength scaling of notched composites
B. G. Green et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Effect of adhesive type and thickness on the lap shear strength
Lucas F. M. da Silva et al.
JOURNAL OF ADHESION (2006)
Residual stresses, strength and toughness of laminates with different layer thickness ratios
R. Bermejo et al.
ACTA MATERIALIA (2006)
Finite fracture mechanics: A coupled stress and energy failure criterion
Pietro Cornetti et al.
ENGINEERING FRACTURE MECHANICS (2006)
A failure criterion for brittle elastic materials under mixed-mode loading
Zohar Yosibash et al.
INTERNATIONAL JOURNAL OF FRACTURE (2006)
Fast and reliable analysis of free-edge stress fields in a thermally loaded composite strip by a layerwise laminate theory
Christian Mittelstedt et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2006)
Initiation of free-edge delamination in composite laminates
L. Lagunegrand et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Justification of Paris-type fatigue laws from cohesive forces model via a variational approach
A. Jaubert et al.
CONTINUUM MECHANICS AND THERMODYNAMICS (2006)
A generalized Paris' law for fatigue crack growth
N. Pugno et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2006)
A hybrid method to assess interface debonding by finite fracture mechanics
A Müller et al.
ENGINEERING FRACTURE MECHANICS (2006)
Prediction of the onset of mode III delamination in carbon-epoxy laminates
AD Diaz et al.
COMPOSITE STRUCTURES (2006)
A criterion study for non-singular stress concentrations in brittle or quasi-brittle materials
J Li et al.
ENGINEERING FRACTURE MECHANICS (2006)
Singularity analysis and fracture energy-release rate for composites: Piecewise homogeneous-anisotropic materials
Loc Vu-Quoc et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2006)
A method to estimate the influence of the notch-root radius on the fracture toughness measurement of ceramics
D Picard et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2006)
The fracture mechanics of finite crack extension
D Taylor et al.
ENGINEERING FRACTURE MECHANICS (2005)
A single-layer theory approach to stress concentration phenomena in layered plates
C Mittelstedt et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Energetic conditions for interfacial failure in the vicinity of a matrix crack in brittle matrix composites
E Martin et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2004)
A matrix function solution for the scaled boundary finite-element equation in statics
CM Song
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2004)
A variational finite layer technique for the investigation of thermally induced stress concentrations in composite structures
C Mittelstedt et al.
JOURNAL OF THERMAL STRESSES (2004)
Interlaminar stress concentrations in layered structures: Part I - A selective literature survey on the free-edge effect since 1967
C Mittelstedt et al.
JOURNAL OF COMPOSITE MATERIALS (2004)
Failure initiation in an epoxy joint between two steel plates
D Leguillon et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2003)
Crack onset at a v-notch. Influence of the notch tip radius
D Leguillon et al.
INTERNATIONAL JOURNAL OF FRACTURE (2003)
A two-term stress function approach to evaluate stress distributions in bonded joints of different geometries
P Lazzarin et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2002)
Fracture in mode I using a conserved phase-field model
LO Eastgate et al.
PHYSICAL REVIEW E (2002)
Strength or toughness? A criterion for crack onset at a notch
D Leguillon
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2002)
The cohesive zone model: advantages, limitations and challenges
M Elices et al.
ENGINEERING FRACTURE MECHANICS (2002)
A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches
P Lazzarin et al.
INTERNATIONAL JOURNAL OF FRACTURE (2001)
Crack deflection by an interface - asymptotics of the residual thermal stresses
D Leguillon et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)
Analysis of a crack at a weak interface
S Lenci
INTERNATIONAL JOURNAL OF FRACTURE (2001)
Finite element interface models for the delamination analysis of laminated composites: Mechanical and computational issues
G Alfano et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2001)
Analysis and evaluation of bondline thickness effects on failure load in adhesively bonded structures
DM Gleich et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2001)
Continuum field description of crack propagation
IS Aranson et al.
PHYSICAL REVIEW LETTERS (2000)
Estimation of transverse/interlaminar stresses in laminated composites - a selective review and survey of current developments
T Kant et al.
COMPOSITE STRUCTURES (2000)
Share Paper
