Related references
Note: Only part of the references are listed.Solar cells with one-day energy payback for the factories of the future
Nieves Espinosa et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Large-scale roll-to-roll photonic sintering of flexo printed silver nanoparticle electrodes
Markus Hosel et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Roll-to-roll fabrication of polymer solar cells
Roar Sondergaard et al.
MATERIALS TODAY (2012)
Evaluation of ink-jet printed current collecting grids and busbars for ITO-free organic solar cells
Yulia Galagan et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing
Nieves Espinosa et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
All-solution-processed ITO-free polymer solar cells fabricated on copper sheets
Tae-Soo Kim et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Polymer- and carbon-based electrodes for polymer solar cells: Toward low-cost, continuous fabrication over large area
Riccardo Po et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
The use of polyurethane as encapsulating method for polymer solar cells-An inter laboratory study on outdoor stability in 8 countries
Roar R. Sondergaard et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules
David M. Tanenbaum et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Environmental and economic assessment of ITO-free electrodes for organic solar cells
Christopher J. M. Emmott et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Current Collecting Grids for ITO-Free Solar Cells
Yulia Galagan et al.
ADVANCED ENERGY MATERIALS (2012)
Round-Robin Studies as a Method for Testing and Validating High-Efficiency ITO-Free Polymer Solar Cells Based on Roll-to-Roll-Coated Highly Conductive and Transparent Flexible Substrates
Thue T. Larsen-Olsen et al.
ADVANCED ENERGY MATERIALS (2012)
The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices
David M. Tanenbaum et al.
RSC ADVANCES (2012)
Aqueous Processing of Low-Band-Gap Polymer Solar Cells Using Roll-to-Roll Methods
Thomas R. Andersen et al.
ACS NANO (2011)
High-Performance Organic Solar Cells with Spray-Coated Hole-Transport and Active Layers
Claudio Girotto et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Technology development for roll-to-roll production of organic photovoltaics
Yulia Galagan et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2011)
The OE-A OPV demonstrator anno domini 2011
Frederik C. Krebs et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
Life-cycle analysis of product integrated polymer solar cells
Nieves Espinosa et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
Economic assessment of solar electricity production from organic-based photovoltaic modules in a domestic environment
Brian Azzopardi et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules
Matthieu Manceau et al.
ORGANIC ELECTRONICS (2011)
ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating
B. Zimmermann et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions
Nieves Espinosa et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Over 30% transparency large area inverted organic solar array by spray
Jason E. Lewis et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Special Issue: 19th International Photovoltaic Science and Engineering Conference and Exhibition (PVSEC-19), Jeju, Korea, 9-13 November 2009
Kwanghee Lee
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
ITO-free flexible organic solar cells with printed current collecting grids
Yulia Galagan et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Airbrush spray-coating of polymer bulk-heterojunction solar cells
Gianpaolo Susanna et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Spray-coated organic solar cells with large-area of 12.25 cm2
Sun-Young Park et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules
Suren A. Gevorgyan et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Fabrication of Polymer Solar Cells Using Aqueous Processing for All Layers Including the Metal Back Electrode
Roar Sondergaard et al.
ADVANCED ENERGY MATERIALS (2011)
Printed Paper Photovoltaic Cells
Arved Huebler et al.
ADVANCED ENERGY MATERIALS (2011)
Ultra Fast and Parsimonious Materials Screening for Polymer Solar Cells Using Differentially Pumped Slot-Die Coating
Jan Alstrup et al.
ACS APPLIED MATERIALS & INTERFACES (2010)
Multi-Source/Component Spray Coating for Polymer Solar Cells
Li-Min Chen et al.
ACS NANO (2010)
Effects of concentrated sunlight on organic photovoltaics
Thomas Tromholt et al.
APPLIED PHYSICS LETTERS (2010)
A new approach to the solvent system for inkjet-printed P3HT:PCBM solar cells and its use in devices with printed passive and active layers
Alexander Lange et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
Fully spray-coated ITO-free organic solar cells for low-cost power generation
Seok-In Na et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies
Frederik C. Krebs et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
A high-mobility electron-transporting polymer for printed transistors
He Yan et al.
NATURE (2009)
All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps
Frederik C. Krebs
ORGANIC ELECTRONICS (2009)
A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules
Frederik C. Krebs et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Organic Solar Cells Using Nanoimprinted Transparent Metal Electrodes
Myung-Gyu Kang et al.
ADVANCED MATERIALS (2008)
Polymer based organic solar cells using ink-jet printed active layers
T. Aernouts et al.
APPLIED PHYSICS LETTERS (2008)
Printing highly efficient organic solar cells
Claudia N. Hoth et al.
NANO LETTERS (2008)
Electrode grids for ITO-free organic photovoltaic devices
Kristofer Tvingstedt et al.
ADVANCED MATERIALS (2007)
ITO-free wrap through organic solar cells - A module concept for cost-efficient reel-to-reel production
B. Zimmermann et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2007)
Fingering instabilities in adhesive failure
M Ben Amar et al.
PHYSICA D-NONLINEAR PHENOMENA (2005)
Temperature dependence for the photovoltaic device parameters of polymer-fullerene solar cells under operating conditions
EA Katz et al.
JOURNAL OF APPLIED PHYSICS (2001)
Share Paper
