Pre-programmable polymer transformers as on-chip microfluidic vacuum generators

This paper develops novel polymer transformers using thermally actuated shape memory polymer (SMP) materials. This paper applies SMPs with thermally induced shape memory effect to the proposed novel polymer transformers as on-chip microfluidic vacuum generators. In this type of SMPs, the morphology of the materials changes when the temperature of materials reaches its glass transition temperature (T(g)). The structure of the polymer transformer can be pre-programmed to define its functions, which the structure is reset to the temporary shape, using shape memory effects. When subjected to heat, the polymer transformer returns to its pre-memory morphology. The morphological change can produce a vacuum generation function in microfluidic channels. Vacuum pressure is generated to suck liquids into the microfluidic chip from fluidic inlets and drive liquids in the microchannel due to the morphological change of the polymer transformer. This study adopts a new smart polymer with high shape memory effects to achieve fluid movement using an on-chip vacuum generation source. Experimental measurements show that the polymer transformer, which uses SMP with a T(g) of 40 degrees C, can deform 310 mu m (recover to the permanent shape from the temporary shape) within 40 s at 65 degrees C. The polymer transformer with an effective cavity volume of 155 mu l achieved negative pressures of -0.98 psi. The maximum negative up to -1.8 psi can be achieved with an effective cavity volume of 268 mu l. A maximum flow rate of 24 mu l/min was produced in the microfluidic chip with a 180 mm long channel using this technique. The response times of the polymer transformers presented here are within 36 s for driving liquids to the end of the detection chamber. The proposed design has the advantages of compact size, ease of fabrication and integration, ease of actuation, and on-demand negative pressure generation. Thus, this design is suitable for disposable biochips that need two liquid samples control. The polymer transformer presented in this study is applicable to numerous disposable microfluidic biochips.