Related references
Note: Only part of the references are listed.Investigation on the fatigue life characteristic of kenaf/glass woven-ply reinforced metal sandwich materials
Ng Lin Feng et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2019)
The effects of stacking configuration on the response of tensile and quasi-static penetration to woven kenaf/glass hybrid composite metal laminate
Kathiravan Subramaniam et al.
POLYMER COMPOSITES (2019)
Fatigue Life Behaviour of Glass/Kenaf Woven-Ply Polymer Hybrid Biocomposites
D. Sivakumar et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)
The application of TRIZ on natural fibre metal laminate to reduce the weight of the car front hood
N. M. Ishak et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)
Tensile and impact properties of cost-effective hybrid fiber metal laminate sandwich structures
Sivakumar Dhar Malingam et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
A review on the characterisation of natural fibres and their composites after alkali treatment and water absorption
M. Chandrasekar et al.
PLASTICS RUBBER AND COMPOSITES (2017)
Bleached kenaf microfiber as a support matrix for cyclodextrin glucanotransferase immobilization via covalent binding by different coupling agents
Ng Lin Cieh et al.
PROCESS BIOCHEMISTRY (2017)
Covalent immobilization of cyclodextrin glucanotransferase on kenaf cellulose nanofiber and its application in ultrafiltration membrane system
Safwan Sulaiman et al.
PROCESS BIOCHEMISTRY (2017)
Partial Replacement of Glass Fiber by Woven Kenaf in Hybrid Composites and its Effect on Monotonic and Fatigue Properties
Mohaiman Jaffar Sharba et al.
BioResources (2016)
Fatigue behaviour assessment of flax-epoxy composites
F. Bensadoun et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Effect of Alkali and Silane Treatments on Mechanical and Fibre-matrix Bond Strength of Kenaf and Pineapple Leaf Fibres
Mohammad Asim et al.
JOURNAL OF BIONIC ENGINEERING (2016)
The effects of different chemical treatment methods on the mechanical and thermal properties of textile fiber reinforced polymer composites
Mehmet Safa Bodur et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Analysis of the mechanical behaviour of flax and glass fabrics-reinforced thermoplastic and thermoset resins
Abderrazak Chilali et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites
V. Fiore et al.
COMPOSITES PART B-ENGINEERING (2015)
Mechanical properties of kenaf fibre reinforced polymer composite: A review
N. Saba et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Investigation of the tensile properties of natural and natural/synthetic hybrid fiber woven fabric composites
Mehmet Karahan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Effects of jute fabric structures on the performance of jute-reinforced polypropylene composites
Sharfun N. Arju et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Tension-tension fatigue behaviour of woven flax/epoxy composites
Soroush Asgarinia et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Hybrid composites based on polyethylene and coir/oil palm fibers
Charles Amani Kakou et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Effects of Maleic Anhydride-Grafted Polypropylene (MAPP) on the Physico-Mechanical Properties and Rheological Behavior of Bamboo Powder-Polypropylene Foamed Composites
Xiaxing Zhou et al.
BioResources (2014)
Polypropylene-based cork-polymer composites: Processing parameters and properties
Emanuel M. Fernandes et al.
COMPOSITES PART B-ENGINEERING (2014)
Fatigue of natural fiber thermoplastic composites
Ahmed Fotouh et al.
COMPOSITES PART B-ENGINEERING (2014)
Can silk become an effective reinforcing fibre? A property comparison with flax and glass reinforced composites
Darshil U. Shah et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Evaluation of thermal treatments to improve physical and mechanical properties of bio-composites made from cotton byproducts and other agricultural fibers
G. A. Holt et al.
INDUSTRIAL CROPS AND PRODUCTS (2014)
Determination of the optimal flax fibre preparation for use in unidirectional flax-epoxy composites
J. Baets et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)
Biomechanical fatigue analysis of an advanced new carbon fiber/flax/epoxy plate for bone fracture repair using conventional fatigue tests and thermography
Zahra S. Bagheri et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)
Preparation and properties of coir fiber-reinforced ethylene glycol dimethacrylate-based composite
Juganta K. Roy et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2014)
Determination of mechanical properties of intra-layer abaca-jute-glass fiber reinforced composite
B. Vijaya Ramnath et al.
MATERIALS & DESIGN (2014)
Effect of coir fiber loading on mechanical and morphological properties of oil palm fibers reinforced polypropylene composites
E. S. Zainudin et al.
POLYMER COMPOSITES (2014)
Mechanical property evaluation of sisal-jute-glass fiber reinforced polyester composites
M. Ramesh et al.
COMPOSITES PART B-ENGINEERING (2013)
Fatigue life evaluation of aligned plant fibre composites through S-N curves and constant-life diagrams
Darshil U. Shah et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Mechanical behaviour of jute cloth/wool felts hybrid laminates
C. Santulli et al.
MATERIALS & DESIGN (2013)
Evaluation of mechanical properties of abaca-jute-glass fibre reinforced epoxy composite
B. Vijaya Ramnath et al.
MATERIALS & DESIGN (2013)
Fiber surface treatment and its effect on mechanical and visco-elastic behaviour of banana/epoxy composite
N. Venkateshwaran et al.
MATERIALS & DESIGN (2013)
Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion
R. Petrucci et al.
MATERIALS & DESIGN (2013)
Wood versus Plant Fibers: Similarities and Differences in Composite Applications
Bo Madsen et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2013)
Critical review of recent publications on use of natural composites in infrastructure
David B. Dittenber et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
The effects of alkali-silane treatment on the tensile and flexural properties of short fibre non-woven kenaf reinforced polypropylene composites
O. M. L. Asumani et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
M. M. Kabir et al.
COMPOSITES PART B-ENGINEERING (2012)
Prediction of tensile properties of hybrid-natural fiber composites
N. Venkateshwaran et al.
COMPOSITES PART B-ENGINEERING (2012)
A comparative study of fatigue behaviour of flax/epoxy and glass/epoxy composites
S. Liang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Preparation and characterization of chemically modified Jute-Coir hybrid fiber reinforced epoxy novolac composites
Sudhir Kumar Saw et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Oil palm fiber reinforced polypropylene composites: effects of fiber loading and coupling agents on mechanical, thermal, and interfacial properties
R. Ramli et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Improving the mechanical properties of natural fibre fabric reinforced epoxy composites by alkali treatment
Libo Yan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Evaluation and testing of mechanical properties of wood plastic composite
Jitendra Bhaskar et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2012)
Effects of alkalization on tensile, impact, and fatigue properties of hemp fiber composites
Asim Shahzad
POLYMER COMPOSITES (2012)
The tensile behavior of off-axis loaded plant fiber composites: An insight on the nonlinear stress-strain response
Darshil U. Shah et al.
POLYMER COMPOSITES (2012)
Biocomposites reinforced with natural fibers: 2000-2010
Omar Faruk et al.
PROGRESS IN POLYMER SCIENCE (2012)
Fatigue Behavior of Kenaf Fibre Reinforced Epoxy Composites
Abdul Hakim Abdullah et al.
ENGINEERING JOURNAL-THAILAND (2012)
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
M. Jawaid et al.
CARBOHYDRATE POLYMERS (2011)
A review on the tensile properties of natural fiber reinforced polymer composites
H. Ku et al.
COMPOSITES PART B-ENGINEERING (2011)
Mechanical and degradation characteristics of natural silk and synthetic phosphate glass fiber reinforced polypropylene composites
Quazi T. H. Shubhra et al.
JOURNAL OF COMPOSITE MATERIALS (2011)
Mechanical property and hydrothermal aging of injection molded jute/polypropylene composites
Yuqiu Yang et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Impact and fatigue properties of hemp-glass fiber hybrid biocomposites
Asim Shahzad
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
Impact and flexural properties of flax fabrics and Lyocell fiber-reinforced bio-based thermoset
Kayode Adekunle et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
Chemical resistance, void content and tensile properties of oil palm/jute fibre reinforced polymer hybrid composites
M. Jawaid et al.
MATERIALS & DESIGN (2011)
Glass-basalt/epoxy hybrid composites for marine applications
V. Fiore et al.
MATERIALS & DESIGN (2011)
Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites
N. Venkateshwaran et al.
MATERIALS & DESIGN (2011)
A review of bast fibres and their composites. Part 1-Fibres as reinforcements
John Summerscales et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Silane coupling agents used for natural fiber/polymer composites: A review
Yanjun Xie et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Interfacial bonding of Flax fibre/Poly(L-lactide) bio-composites
Antoine Le Duigou et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Rapid determination of fatigue failure based on temperature evolution: Fully reversed bending load
M. Amiri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Flax/PP Weft-knitted Thermoplastic Composites and its Tensile Properties
Hong-Xia Li et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam
M. M. Davoodi et al.
MATERIALS & DESIGN (2010)
Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers
Igor Maria De Rosa et al.
MATERIALS & DESIGN (2010)
Mechanical properties of natural fibers reinforced polyester hybrid composite
A. Athijayarnani et al.
INTERNATIONAL JOURNAL OF PLASTICS TECHNOLOGY (2010)
Effect of Fiber Surface Modification on the Interfacial and Mechanical Properties of Kenaf Fiber-Reinforced Thermoplastic and Thermosetting Polymer Composites
Donghwan Cho et al.
COMPOSITE INTERFACES (2009)
Hybrid composites of jute and man-made cellulose fibers with polypropylene by injection moulding
Mubarak A. Khan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Tensile Testing of Cellulose Based Natural Fibers for Structural Composite Applications
Mark C. Symington et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Recent Development in Natural Fiber Reinforced Polypropylene Composites
Ramakrishna Malkapuram et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Effect of recycling on mechanical behaviour of biocompostable flax/poly(L-lactide) composites
Antoine Le Duigou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Mechanical performance of Kraft fibre reinforced polypropylene composites: Influence of fibre length, fibre beating and hygrothermal ageing
M. D. H. Beg et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Fatigue of sisal fibre reinforced composites: Constant-life diagrams and hysteresis loop capture
Arnold N. Towo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Development of HEMP fiber reinforced polypropylene composites
Hajnalka Hargitai et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2008)
Recent developments in chemical modification and characterization of natural fiber-reinforced composites
Maya Jacob John et al.
POLYMER COMPOSITES (2008)
Impact and fatigue behaviour of hemp fibre composites
Tong Yuanjian et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications?
Edwin Bodros et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review
Xue Li et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2007)
Pre-treatment of flax fibers for use in rotationally molded biocomposites
B. Wang et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2007)
Agro-hybrid composite: The effects on mechanical and physical properties of oil palm fiber (EFB)/glass hybrid reinforced polyester composites
H. P. S. Abdul Khalil et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2007)
Hemp yarn reinforced composites - II. Tensile properties
Bo Madsen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Natural-fiber-reinforced polymer composites applications in automotive
James Holbery et al.
JOM (2006)
Re-evaluation of fragmentation test based on the stress singularity of interface end
Y Dai et al.
COMPOSITE INTERFACES (2006)
Mechanical properties of woven banana fibre reinforced epoxy composites
SM Sapuan et al.
MATERIALS & DESIGN (2006)
Study on the mechanical properties of jute/glass fiber-reinforced unsaturated polyester hybrid composites: Effect of surface modification by ultraviolet radiation
Abdullah-Al-Kafi et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)
The effect of fiber surface treatments on the tensile and water sorption properties of polypropylene-luffa fiber composites
H Demir et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Development of hemp fibre - PP nonwoven composites
Hajnalka Hargitai et al.
MACROMOLECULAR SYMPOSIA (2006)
Fatigue behaviour of oil palm fruit bunch fibre/epoxy and carbon fibre/epoxy composites
A Kalam et al.
COMPOSITE STRUCTURES (2005)
Wood modification with alkoxysilanes
S Donath et al.
WOOD SCIENCE AND TECHNOLOGY (2004)
Effect of MAPP as a coupling agent on the performance of Jute-PP composites
S Mohanty et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2004)
Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites
S Mishra et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
The thermal and crystallisation studies of short sisal fibre reinforced polypropylene composites
PV Joseph et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites
MM Thwe et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Manufacturing sisal-polypropylene composites with minimum fibre degradation
K Jayaraman
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
A damage model for the fatigue life of elastomeric materials
B Wang et al.
MECHANICS OF MATERIALS (2002)
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
LY Mwaikambo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres
MS Sreekala et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Stress-strain behavior in initial yield stage of short fiber reinforced metal matrix composite
XD Ding et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Sisal fibre and its composites: a review of recent developments
Y Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
Boiling water and silane pre-treatment of aluminium alloys for durable adhesive bonding
AN Rider et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2000)
Activation energy and crystallization kinetics of untreated and treated oil palm fibre reinforced phenol formaldehyde composites
R Agrawal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)