The characteristics and failure mechanism of the largest landslide triggered by the Wenchuan earthquake, May 12, 2008, China

Strong earthquakes are among the prime triggering factors of landslides. The 2008 Wenchuan earthquake (M-w=7.9) triggered tens of thousands of landslides. Among them, the Daguangbao landslide is the largest one, which covered an area of 7.8km(2) with a maximum width of 2.2km and an estimated volume of 7.5x10(8)m(3). The landslide is located on the hanging wall of the seismogenic fault, the Yingxiu-Beichuan fault in Anxian town, Sichuan Province. The sliding mass travelled about 4.5km and blocked the Huangdongzi valley, forming a landslide dam nearly 600m high. Compared to other coseismic landslides in the study area, the Daguangbao landslide attained phenomenal kinetic energy, intense cracking, and deformation, exposing a 1-km long head scarp in the rear of the landslide. Based on the field investigation, we conclude that the occurrence of the landslide is controlled mainly by the seismic, terrain, and geological factors. The special location of the landslide and the possible topographic amplification of ground motions due to the terrain features governed the landslide failure. The effects of earthquakes on the stability of slopes were considered in two aspects: First, the ground shaking may reduce the frictional strength of the substrate by shattering of rock mass. Second, the seismic acceleration may result in short-lived and episodic changes of the normal (tensile) and shear stresses in the hillshopes during earthquakes. According to the failure mechanism, the dynamic process of the landslide might contain four stages: (a) the cracking of rock mass in the rear of the slope mainly due to the tensile stress generated by the ground shaking; (b) the shattering of the substrate due to the ground shaking, which reduced the frictional strength of the substrate; (c) the shearing failure of the toe of the landslide due to the large shear stress caused by the landslide gravity; and (d) the deposition stage.