Related references
Note: Only part of the references are listed.Viscosity measurement of nanoimprint lithography resists with a rheological nanoindenter
A. A. Svintsov et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2007)
Surface characterization of imprinted resist above glass transition temperature
T. Leveder et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2007)
Benchmarking of 50 nm features in thermal nanoimprint
C. Gourgon et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2007)
High resolution nanoimprinting with a robust and reusable polymer mold
David R. Barbero et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Adhesion between template materials and UV-cured nanoimprint resists
F. A. Houle et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2007)
Polymer viscoelasticity and residual stress effects on nanoimprint lithography
Yifu Ding et al.
ADVANCED MATERIALS (2007)
Antiadhesion considerations for UV nanoimprint lithography
F. A. Houle et al.
APPLIED PHYSICS LETTERS (2007)
Reverse-contact UV nanoimprint lithography for multilayered structure fabrication
N. Kehagias et al.
NANOTECHNOLOGY (2007)
Development of a novel, low-viscosity UV-curable polymer system for UV-nanoimprint lithography
Marko Vogler et al.
MICROELECTRONIC ENGINEERING (2007)
Characterisation of ultraviolet nanoimprint dedicated resists
P. Voisin et al.
MICROELECTRONIC ENGINEERING (2007)
Coarse-grain method for modeling of stamp and substrate deformation in nanoimprint
Vadim Sirotkin et al.
MICROELECTRONIC ENGINEERING (2007)
Fast heating and cooling in nanoimprint using a spring-loaded adapter in a preheated press
Helmut Schift et al.
MICROELECTRONIC ENGINEERING (2007)
Template fabrication for the 32 nm node and beyond
Gerard M. Schmid et al.
MICROELECTRONIC ENGINEERING (2007)
UV nanoimprint materials: Surface energies, residual layers, and imprint quality
H. Schmitt et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2007)
Optimization of demolding temperature for throughput improvement of nanoimprint lithography
T. Leveder et al.
MICROELECTRONIC ENGINEERING (2007)
Integration of active and passive polymer optics
Mads Brokner Christiansen et al.
OPTICS EXPRESS (2007)
Analysis of the demolding forces during hot embossing
Yuhua Guo et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2007)
Nanoimprint lithography: Methods and material requirements
L. Jay Guo
ADVANCED MATERIALS (2007)
A novel liquid thermal polymerization resist for nanoimprint lithography with low shrinkage and high flowability
Wen-chang Liao et al.
NANOTECHNOLOGY (2007)
High quality film nanoimprint technology for Blu-Ray disc (BD) media
T. Ohta et al.
IEEE TRANSACTIONS ON MAGNETICS (2007)
Air bubble formation and dissolution in dispensing nanoimprint lithography
Xiaogan Liang et al.
NANOTECHNOLOGY (2007)
Siloxane copolymers for nanoimprint lithography
Philip Choi et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Multiple replication of three dimensional structures with undercuts
S. Moellenbeck et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2007)
Materials for step and flash imprint lithography (S-FIL (R))
Brian K. Long et al.
JOURNAL OF MATERIALS CHEMISTRY (2007)
Thermal imprint with negligibly low residual layer
Nicolas Bogdanski et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2006)
Evidence for internal stresses induced by nanoimprint lithography
Hyun Wook Ro et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2006)
Influence of mold depth on capillary bridges in nanoimprint lithography
N. Chaix et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2006)
The production of nanostructures by mechanical forming
Graham L. W. Cross
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2006)
Fabrication of fluorine-doped diamond-like carbon stamps for UV nanoimprint lithography
A. O. Altun et al.
NANOTECHNOLOGY (2006)
Polymeric distributed feedback lasers by room-temperature nanoimprint lithography
Elisa Mele et al.
APPLIED PHYSICS LETTERS (2006)
Influence of the molecular weight and imprint conditions on the formation of capillary bridges in nanoimprint lithography
N. Chaix et al.
NANOTECHNOLOGY (2006)
Trends in imprint lithography for biological applications
Van N. Truskett et al.
TRENDS IN BIOTECHNOLOGY (2006)
Stamp design effect on 100 nm feature size for 8 inch NanoImprint lithography
S. Landis et al.
NANOTECHNOLOGY (2006)
Implementation of an imprint damascene process for interconnect fabrication
Gerard M. Schmid et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2006)
Ordered three-dimensional hierarchical nanostructures by nanoimprint lithography
Fengxiang Zhang et al.
NANOTECHNOLOGY (2006)
Patterning layered polymeric multilayer films by room-temperature nanoimprint lithography
YX Lu et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2006)
Viscous flow simulation in nanoimprint using coarse-grain method
V. Sirotkin et al.
MICROELECTRONIC ENGINEERING (2006)
Impact of molecular weight of polymers and shear rate effects for nanoimprint lithography
H Schulz et al.
MICROELECTRONIC ENGINEERING (2006)
Modeling and optimization of the hot embossing process for micro- and nanocomponent fabrication
M Worgull et al.
JOURNAL OF MICROLITHOGRAPHY MICROFABRICATION AND MICROSYSTEMS (2006)
Ultrasonic nanoimprint lithography: a new approach to nanopatterning
Chien-Hung Lin et al.
JOURNAL OF MICROLITHOGRAPHY MICROFABRICATION AND MICROSYSTEMS (2006)
Impact of polymer film thickness and cavity size on polymer flow during embossing: toward process design rules for nanoimprint lithography
HD Rowland et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)
Fabrication of 1/4 wave plate by nanocasting lithography
T Yoshikawa et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2005)
Topas-based lab-on-a-chip microsystems fabricated by thermal nanoimprint lithography
B Bilenberg et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2005)
Polymer time constants during low temperature nanoimprint lithography
HC Scheer et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2005)
Effect of initial resist thickness on residual layer thickness of nanoimprinted structures
HJ Lee et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2005)
Effects of etch barrier densification on step and flash imprint lithography
S Johnson et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2005)
Ultraviolet-based nanoimprint at reduced environmental pressure
A Fuchs et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2005)
Direct imprinting using soft mold and gas pressure for large area and curved surfaces
JH Chang et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2005)
Polymer cell culture substrates with combined nanotopographical patterns and micropatterned chemical domains
JL Charest et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2005)
Multilevel, room-temperature nanoimprint lithography for conjugated polymer-based photonics
E Mele et al.
NANO LETTERS (2005)
Simulation of fluid flow in the step and flash imprint lithography process
S Reddy et al.
MICROELECTRONIC ENGINEERING (2005)
Hydrophobicity, adhesion, and friction properties of nanopatterned polymers and scale dependence for micro- and nanoelectromechanical systems
Z Burton et al.
NANO LETTERS (2005)
Room-temperature, low-pressure nanoimprinting based on cationic photopolymerization of novel epoxysilicone monomers
X Cheng et al.
ADVANCED MATERIALS (2005)
Fabrication of polymer photonic crystals using nanoimprint lithography
H Schift et al.
NANOTECHNOLOGY (2005)
Controlled co-evaporation of silanes for nanoimprint stamps
H Schift et al.
NANOTECHNOLOGY (2005)
Wafer to wafer nano-imprinting lithography with monomer based thermally curable resin
H Lee et al.
MICROELECTRONIC ENGINEERING (2005)
Electrohydrodynamic instability of a thin film of viscoelastic polymer underneath a lithographically manufactured mask
L Wu et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2005)
Uniformity across 200 mm silicon wafers printed by nanoimprint lithography
C Gourgon et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2005)
Nanofabrication with step and flash imprint lithography
MD Stewart et al.
JOURNAL OF MICROLITHOGRAPHY MICROFABRICATION AND MICROSYSTEMS (2005)
Light from Si via dislocation loops
Kevin P. Homewood et al.
MATERIALS TODAY (2005)
Full wafer scale near zero residual nano-imprinting lithography using UV curable monomer solution
H Lee et al.
MICROELECTRONIC ENGINEERING (2005)
A combined-nanoimprint-and-photolithography patterning technique
X Cheng et al.
MICROELECTRONIC ENGINEERING (2004)
One-step lithography for various size patterns with a hybrid mask-mold
X Cheng et al.
MICROELECTRONIC ENGINEERING (2004)
Room-temperature nanoimprint lithography of non-thermoplastic organic films
D Pisignano et al.
ADVANCED MATERIALS (2004)
Review on micro molding of thermoplastic polymers
M Heckele et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
Rapid flash patterning of nanostructures
H Yoon et al.
APPLIED PHYSICS LETTERS (2004)
Ramifications of lubrication theory on imprint lithography
M Colburn et al.
MICROELECTRONIC ENGINEERING (2004)
Nanoimprint lithography in the cyclic olefin copolymer, Topas®, a highly ultraviolet-transparent and chemically resistant thermoplast
T Nielsen et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2004)
Polymer imprint lithography with molecular-scale resolution
F Hua et al.
NANO LETTERS (2004)
Fabrication of 5 nm linewidth and 14 nm pitch features by nanoimprint lithography
MD Austin et al.
APPLIED PHYSICS LETTERS (2004)
In situ real time process characterization in nanoimprint lithography using time-resolved diffractive scatterometry
ZN Yu et al.
APPLIED PHYSICS LETTERS (2004)
Recent progress in nanoimprint technology and its applications
LJ Guo
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2004)
Polyvinyl alcohol templates for low cost, high resolution, complex printing
CD Schaper et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2004)
High resolution lithography with PDMS molds
M Bender et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2004)
Mold deformation in nanoimprint lithography
F Lazzarino et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2004)
Interferometric in situ alignment for UV-based nanoimprint
A Fuchs et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2004)
Step-and-repeat photo-nanoimprint system using active orientation head
H Hiroshima et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS (2004)
Why optical lithography will live forever
TA Brunner
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2003)
Adhesion and stiction: Mechanisms, measurement techniques, and methods for reduction
B Bhushan
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2003)
High aspect pattern fabrication by nano imprint lithography using fine diamond mold
Y Hirai et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS (2003)
Elimination of pattern defects of nanoimprint under atmospheric conditions
H Hiroshima et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS (2003)
Large scale ultraviolet-based nanoimprint lithography
B Vratzov et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2003)
Defect analysis in thermal nanoimprint lithography
Y Hirai et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2003)
Nano-imprint molding resists for lithography
H Schift et al.
JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY (2003)
Mechanical properties of poly-methyl methacrylate (PMMA) for nano imprint lithography
Y Hirai et al.
JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY (2003)
Pattern transfer fidelity of nanoimprint lithography on six-inch wafers
MT Li et al.
NANOTECHNOLOGY (2003)
Prediction of fabrication distortions in step and flash imprint lithography templates
CJ Martin et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2002)
Reversal imprinting by transferring polymer from mold to substrate
XD Huang et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2002)
Ultrafast and direct imprint of nanostructures in silicon
SY Chou et al.
NATURE (2002)
Nanoembossing of thermoplastic polymers for microfluidic applications
V Studer et al.
APPLIED PHYSICS LETTERS (2002)
Hot embossing in microfabrication. Part I: Experimental
YJ Juang et al.
POLYMER ENGINEERING AND SCIENCE (2002)
Hot embossing in microfabrication. Part II: Rheological characterization and process analysis
YJ Juang et al.
POLYMER ENGINEERING AND SCIENCE (2002)
The glass transition in thin polymer films
JA Forrest et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2001)
Polymer bonding process for nanolithography
T Borzenko et al.
APPLIED PHYSICS LETTERS (2001)
Dynamic instability of strongly confined thin polymer films in spinodal dewetting
KY Suh et al.
PHYSICAL REVIEW LETTERS (2001)
Multistep profiles by mix and match of nanoimprint and UV lithography
K Pfeiffer et al.
MICROELECTRONIC ENGINEERING (2001)
Characterization and application of a UV-based imprint technique
M Otto et al.
MICROELECTRONIC ENGINEERING (2001)
Multilevel nanoimprint lithography with submicron alignment over 4 in. Si wafers
W Zhang et al.
APPLIED PHYSICS LETTERS (2001)
A contribution to the flow behaviour of thin polymer films during hot embossing lithography
HC Scheer et al.
MICROELECTRONIC ENGINEERING (2001)
Pattern formation in hot embossing of thin polymer films
H Schift et al.
NANOTECHNOLOGY (2001)
Flow behaviour of thin polymer films used for hot embossing lithography
LJ Heyderman et al.
MICROELECTRONIC ENGINEERING (2000)
Master replication into thermosetting polymers for nanoimprinting
H Schulz et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2000)
Room-temperature imprint lithography by solvent vapor treatment
DY Khang et al.
APPLIED PHYSICS LETTERS (2000)
Share Paper
