Development and demonstration of a stability management system for gas turbine engines

Rig and engine test processes and in-flight operation and safety for modern gas turbine engines can be greatly improved with the development of accurate on-line measurement to gauge the aerodynamic stability level for fans and compressors. This paper describes the development and application of a robust real-time algorithm for gauging fan/compressor aerodynamic stability level using over-the-rotor dynamic pressure sensors. This real-time scheme computes a correlation measure through signal multiplication and integration. The algorithm uses the existing speed signal from the engine control for cycle synchronization. The algorithm is simple and is implemented on a portable computer to facilitate rapid real-time implementation on different experimental platforms as demonstrated both on a full-scale high-speed compressor rig and on an advanced aircraft engine. In the multistage advanced compressor rig test, the compressor was moved toward stall at constant speed by closing a discharge valve. The stability management system was able to detect an impending stall and trigger opening of the valve so as to avoid compressor surge. In the full-scale engine test, the engine was configured with a one-per-revolution distortion screen and transients were run with a significant amount of fuel enrichment to facilitate stall. Test data from a series of continuous rapid transients run in the engine test showed that in all cases, the stability management system was able to detect an impending stall and manipulated the enrichment part of the fuel schedule to provide stall-free transients.