Related references
Note: Only part of the references are listed.Monolithic and assembled polymer-ceramic composites for bone regeneration
Anandkumar Nandakumar et al.
ACTA BIOMATERIALIA (2013)
Surface modification of electrospun fibre meshes by oxygen plasma for bone regeneration
A. Nandakumar et al.
BIOFABRICATION (2013)
In vivo performance of microstructured calcium phosphate formulated in novel water-free carriers
Noel Davison et al.
ACTA BIOMATERIALIA (2012)
Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds
Stefan Lohfeld et al.
ACTA BIOMATERIALIA (2012)
Controlled release of bone morphogenetic protein 2 and dexamethasone loaded in core-shell PLLACL-collagen fibers for use in bone tissue engineering
Yan Su et al.
ACTA BIOMATERIALIA (2012)
Three-Dimensional Poly(ε-caprolactone) Bioactive Scaffolds with Controlled Structural and Surface Properties
A. Gloria et al.
BIOMACROMOLECULES (2012)
A biphasic scaffold design combined with cell sheet technology for simultaneous regeneration of alveolar bone/periodontal ligament complex
Cedryck Vaquette et al.
BIOMATERIALS (2012)
Traversing Material Scales: Macroscale LBL-Assembled Nanocomposites with Microscale Inverted Colloidal Crystal Architecture
Christine M. Andres et al.
CHEMISTRY OF MATERIALS (2012)
Control of stem cell fate and function by engineering physical microenvironments
Kshitiz et al.
INTEGRATIVE BIOLOGY (2012)
A Tissue Engineering Solution for Segmental Defect Regeneration in Load-Bearing Long Bones
Johannes C. Reichert et al.
SCIENCE TRANSLATIONAL MEDICINE (2012)
Biofabrication of Osteochondral Tissue Equivalents by Printing Topologically Defined, Cell-Laden Hydrogel Scaffolds
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART C-METHODS (2012)
Influence of different polymeric gels on the ectopic bone forming ability of an osteoinductive biphasic calcium phosphate ceramic
Davide Barbieri et al.
ACTA BIOMATERIALIA (2011)
Surface modification of electrospun PLLA nanofibers by plasma treatment and cationized gelatin immobilization for cartilage tissue engineering
Jyh-Ping Chen et al.
ACTA BIOMATERIALIA (2011)
Three-dimensional plotted scaffolds with controlled pore size gradients: Effect of scaffold geometry on mechanical performance and cell seeding efficiency
Jorge M. Sobral et al.
ACTA BIOMATERIALIA (2011)
Biomimetic Structures: Biological Implications of Dipeptide-Substituted Polyphosphazene-Polyester Blend Nanofiber Matrices for Load-Bearing Bone Regeneration
Meng Deng et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Computer-Aided Design and Manufacturing and Rapid Prototyped Nanoscale Hydroxyapatite/Polyamide (n-HA/PA) Construction for Condylar Defect Caused by Mandibular Angle Ostectomy
Jihua Li et al.
AESTHETIC PLASTIC SURGERY (2011)
The influence of stereolithographic scaffold architecture and composition on osteogenic signal expression with rat bone marrow stromal cells
Kyobum Kim et al.
BIOMATERIALS (2011)
Periodontal regeneration using a bilayered PLGA/calcium phosphate construct
Emily C. Carlo Reis et al.
BIOMATERIALS (2011)
The determination of stem cell fate by 3D scaffold structures through the control of cell shape
Girish Kumar et al.
BIOMATERIALS (2011)
Amide-Linkage Formed Between Ammonia Plasma Treated Poly(D,L-lactide acid) Scaffolds and Bio-Peptides: Enhancement of Cell Adhesion and Osteogenic Differentiation In Vitro
Zi-Xing Xu et al.
BIOPOLYMERS (2011)
Allograft bone matrix versus synthetic bone graft substitutes
Gerald Zimmermann et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2011)
Vertical bone augmentation with 3D-synthetic monetite blocks in the rabbit calvaria
Jesus Torres et al.
JOURNAL OF CLINICAL PERIODONTOLOGY (2011)
Nanoscale surfaces for the long-term maintenance of mesenchymal stem cell phenotype and multipotency
Rebecca J. McMurray et al.
NATURE MATERIALS (2011)
An algorithm-based topographical biomaterials library to instruct cell fate
Hemant V. Unadkat et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2011)
OSTEOINDUCTIVE BIOMATERIALS: CURRENT KNOWLEDGE OF PROPERTIES, EXPERIMENTAL MODELS AND BIOLOGICAL MECHANISMS
Ana M. C. Barradas et al.
EUROPEAN CELLS & MATERIALS (2011)
Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing
Ferry P. W. Melchels et al.
ACTA BIOMATERIALIA (2010)
Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering
Bin Duan et al.
ACTA BIOMATERIALIA (2010)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Fabrication and mechanical characterization of 3D electrospun scaffolds for tissue engineering
L. D. Wright et al.
BIOMEDICAL MATERIALS (2010)
Biomimetic calcium phosphate coatings on recombinant spider silk fibres
Liang Yang et al.
BIOMEDICAL MATERIALS (2010)
The effect of scaffold architecture on properties of direct 3D fiber deposition of porous Ti6Al4V for orthopedic implants
J. P. Li et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2010)
Low temperature fabrication of magnesium phosphate cement scaffolds by 3D powder printing
Uwe Klammert et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2010)
Aligned Bioactive Multi-Component Nanofibrous Nanocomposite Scaffolds for Bone Tissue Engineering
Moncy V. Jose et al.
MACROMOLECULAR BIOSCIENCE (2010)
Synthetic polymer coatings for long-term growth of human embryonic stem cells
Luis G. Villa-Diaz et al.
NATURE BIOTECHNOLOGY (2010)
Harnessing traction-mediated manipulation of the cell/matrix interface to control stem-cell fate
Nathaniel Huebsch et al.
NATURE MATERIALS (2010)
Osteoinductive ceramics as a synthetic alternative to autologous bone grafting
Huipin Yuan et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2010)
Geometric cues for directing the differentiation of mesenchymal stem cells
Kristopher A. Kilian et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2010)
The Role of Endothelial Progenitor Cells in Prevascularized Bone Tissue Engineering: Development of Heterogeneous Constructs
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART A (2010)
Development, characterization and clinical use of a biodegradable composite scaffold for bone engineering in oro-maxillo-facial surgery
John E. Davies et al.
ORGANOGENESIS (2010)
ALIGNED ELECTROSPUN POLYMER FIBRES FOR SKELETAL MUSCLE REGENERATION
K. J. Aviss et al.
EUROPEAN CELLS & MATERIALS (2010)
Nucleation and growth of biomimetic apatite layers on 3D plotted biodegradable polymeric scaffolds: Effect of static and dynamic coating conditions
A. L. Oliveira et al.
ACTA BIOMATERIALIA (2009)
Development of an electrospun nano-apatite/PCL composite membrane for GTR/GBR application
Fang Yang et al.
ACTA BIOMATERIALIA (2009)
Artificial Stem Cell Niches
Matthias P. Lutolf et al.
ADVANCED MATERIALS (2009)
Fumaric Acid Monoethyl Ester-Functionalized Poly(D,L-lactide)/N-vinyl-2-pyrrolidone Resins for the Preparation of Tissue Engineering Scaffolds by Stereolithography
Janine Jansen et al.
BIOMACROMOLECULES (2009)
A poly(D,L-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Ferry P. W. Melchels et al.
BIOMATERIALS (2009)
In vitro analog of human bone marrow from 3D scaffolds with biomimetic inverted colloidal crystal geometry
Joan E. Nichols et al.
BIOMATERIALS (2009)
Histological evaluation of osteogenesis of 3D-printed poly-lactic-co-glycolic acid (PLGA) scaffolds in a rabbit model
Zigang Ge et al.
BIOMEDICAL MATERIALS (2009)
Delivery of recombinant bone morphogenetic proteins for bone regeneration and repair. Part A: Current challenges in BMP delivery
Ziyad S. Haidar et al.
BIOTECHNOLOGY LETTERS (2009)
Next generation calcium phosphate-based biomaterials
Laurence C. CHOW
DENTAL MATERIALS JOURNAL (2009)
Chemically modified light-curable chitosans with enhanced potential for bone tissue repair
Yongzhi Qiu et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2009)
Evaluation of polycaprolactone scaffold degradation for 6 months in vitro and in vivo
Christopher X. F. Lam et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2009)
The effect of temperature and humidity on electrospinning
S. De Vrieze et al.
JOURNAL OF MATERIALS SCIENCE (2009)
Gelatin-Based Photopolymers for Bone Replacement Materials
Monika Schuster et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2009)
Different methods to synthesize ceramic foams
J. Luyten et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Interconnected porous hydroxyapatite ceramics for bone tissue engineering
Hideki Yoshikawa et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2009)
Sequential click reactions for synthesizing and patterning three-dimensional cell microenvironments
Cole A. DeForest et al.
NATURE MATERIALS (2009)
Composite Electrospun Scaffolds for Engineering Tubular Bone Grafts
Andrew Krishna Ekaputra et al.
TISSUE ENGINEERING PART A (2009)
A review of rapid prototyping techniques for tissue engineering purposes
Sanna M. Peltola et al.
ANNALS OF MEDICINE (2008)
Nanobioengineered electrospun composite nanofibers and osteoblasts for bone regeneration
Jayarama Reddy Venugopal et al.
ARTIFICIAL ORGANS (2008)
Biodegradable microfiber implants delivering paclitaxel for post-surgical chemotherapy against malignant glioma
Sudhir H. Ranganath et al.
BIOMATERIALS (2008)
Electrospun poly(lactic acid-co-glycolic acid) scaffolds for skin tissue engineering
Sangamesh G. Kumbar et al.
BIOMATERIALS (2008)
Biomimetic calcium phosphate coating on electrospun poly (ε-caprolactone) scaffolds for bone tissue engineering
F. Yang et al.
CHEMICAL ENGINEERING JOURNAL (2008)
Effects of bioactive glass and β-TCP containing three-dimensional laser sintered polyetheretherketone composites on osteoblasts in vitro
Cornelius von Wilmowsky et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)
Nanofibrous matrices of poly(lactic acid) and gelatin polymeric blends for the improvement of cellular responses
Hae-Won Kim et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)
Electrospun fibrous web of collagen-apatite precipitated nanocomposite for bone regeneration
Ju-Ha Song et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2008)
Surface modified electrospun nanofibrous scaffolds for nerve tissue engineering
Molamma P. Prabhakaran et al.
NANOTECHNOLOGY (2008)
Small functional groups for controlled differentiation of hydrogel-encapsulated human mesenchymal stem cells
Danielle S. W. Benoit et al.
NATURE MATERIALS (2008)
Regenerating Articular Tissue by Converging Technologies
Lorenzo Moroni et al.
PLOS ONE (2008)
Poly(lactic-co-glycolic acid) Bone Scaffolds with Inverted Colloidal Crystal Geometry
Meghan J. Cuddihy et al.
TISSUE ENGINEERING PART A (2008)
Application of microstereolithography in the development of three-dimensional cartilage regeneration scaffolds
Seung-Jae Lee et al.
BIOMEDICAL MICRODEVICES (2008)
The control of human mesenchymal cell differentiation using nanoscale symmetry and disorder
Matthew J. Dalby et al.
NATURE MATERIALS (2007)
Two-photon polymerization technique for microfabrication of CAD-designed 3D scaffolds from commercially available photosensitive materials
Aleksandr Ovsianikov et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2007)
Biological performance in goats of a porous titanium alloy-biphasic calcium phosphate composite
Jiaping Li et al.
BIOMATERIALS (2007)
Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices
Uwe Gbureck et al.
JOURNAL OF CONTROLLED RELEASE (2007)
Preparation of electrospun silk fibroin fiber mats as bone scaffolds: a preliminary study
Chidchanok Meechaisue et al.
BIOMEDICAL MATERIALS (2007)
Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants
Alaadien Khalyfa et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2007)
Electrospinning of PVA-calcium phosphate sol precursors for the production of fibrous hydroxyapatite
Xiaoshu Dai et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)
In vitro bone engineering based on polycaprolactone and polycaprolactone-tricalcium phosphate composites
Yefang Zhou et al.
POLYMER INTERNATIONAL (2007)
Bone scaffolds from electrospun fiber mats of poly (3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and their blend
Korakot Sombatmankhong et al.
POLYMER (2007)
Comparison of Human alveolar osteoblasts cultured on polymer-ceramic composite scaffolds and tissue culture plates
Z. Yefang et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2007)
Nanostructured biocomposite scaffolds based on collagen coelectrospun with nanohydroxyapatite
Vinoy Thomas et al.
BIOMACROMOLECULES (2007)
Cell-based bone tissue engineering
Gert J. Meijer et al.
PLOS MEDICINE (2007)
Surface modification of biodegradable electrospun nanofiber scaffolds and their interaction with fibroblasts
Kwideok Park et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2007)
Electrospinning biomedical nanocomposite fibers of hydroxyapaite/poly(lactic acid) for bone regeneration
Hae-Won Kim et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)
Growth of mesenchymal stem cells on electrospun type I collagen nanofibers
Yu-Ru V. Shih et al.
STEM CELLS (2006)
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering
Sylvain Deville et al.
BIOMATERIALS (2006)
Safety and efficacy of use of demineralised bone matrix in orthopaedic and trauma surgery
Haralampos T. H. Dinopoulos et al.
EXPERT OPINION ON DRUG SAFETY (2006)
PLLA scaffolds with biomimetic apatite coating and biomimetic apatite/collagen composite coating to enhance osteoblast-like cells attachment and activity
Yun Chen et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Fiber diameter and texture of electrospun PEOT/PBT scaffolds influence human mesenchymal stem cell proliferation and morphology, and the release of incorporated compounds
Lorenzo Moroni et al.
BIOMATERIALS (2006)
Dynamic mechanical properties of 3D fiber-deposited PEOT/PBT scaffolds: An experimental and numerical analysis
L. Moroni et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)
Production and potential of bioactive glass nanofibers as a next-generation biomaterial
Hae-Won Kim et al.
ADVANCED FUNCTIONAL MATERIALS (2006)
Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications
P Miranda et al.
ACTA BIOMATERIALIA (2006)
Nanofiber generation of hydroxyapatite and fluor-hydroxyapatite bioceramics
HW Kim et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2006)
A prospective randomized study of posterolateral lumbar fusion using Osteogenic Protein-1 (OP-1) versus local autograft with ceramic bone substitute -: Emphasis of surgical exploration and histologic assessment
M Kanayama et al.
SPINE (2006)
Effect of fiber diameter on spreading, proliferation, and differentiation of osteoblastic cells on electrospun poly(lactic acid) substrates
AS Badami et al.
BIOMATERIALS (2006)
Conventional and novel processing methods for cellular ceramics
P Colombo
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)
Electrospun silk-BMP-2 scaffolds for bone tissue engineering
CM Li et al.
BIOMATERIALS (2006)
Co-culture of bone marrow fibroblasts and endothelial cells on modified polycaprolactone substrates for enhanced potentials in bone tissue engineering
Cleo S. N. Choong et al.
TISSUE ENGINEERING (2006)
Porous Ti6Al4V scaffolds directly fabricated by 3D fibre deposition technique: Effect of nozzle diameter
JP Li et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2005)
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
B Leukers et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2005)
Biological evaluation of chitosan nanofiber membrane for guided bone regeneration
SY Shin et al.
JOURNAL OF PERIODONTOLOGY (2005)
Bone defect healing with an osteogenic protein-1 device combined with carboxymethylcellulose
SD Cook et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Electrospun fibre bundle made of aligned nanofibres over two fixed points
WE Teo et al.
NANOTECHNOLOGY (2005)
Osteogenic differentiation of mesenchymal progenitor cells in computer designed fibrin-polymer-ceramic scaffolds manufactured by fused deposition modeling
JT Schantz et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2005)
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
JM Williams et al.
BIOMATERIALS (2005)
Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering
H Seitz et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Porous scaffold design for tissue engineering
SJ Hollister
NATURE MATERIALS (2005)
Electrospinning of nano/micro scale poly(L-lactic acid) aligned fibers and their potential in neural tissue engineering
F Yang et al.
BIOMATERIALS (2005)
Processing and mechanical properties of hydroxyapatite pieces obtained by the gelcasting method
S Padilla et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)
Three-dimensional bioactive and biodegradable scaffolds fabricated by surface-selective laser sintering
EN Antonov et al.
ADVANCED MATERIALS (2005)
A three-dimensional nanofibrous scaffold for cartilage tissue engineering using human mesenchymal stem cells
WJ Li et al.
BIOMATERIALS (2005)
Electrospinning of gelatin fibers and gelatin/PCL composite fibrous scaffolds
YZ Zhang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Review on calcium phosphate coatings produced using a sputtering process - an alternative to plasma spraying
YZ Yang et al.
BIOMATERIALS (2005)
A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity
CY Lin et al.
JOURNAL OF BIOMECHANICS (2004)
Cell shape, cytoskeletal tension, and RhoA regulate stem cell lineage commitment
R McBeath et al.
DEVELOPMENTAL CELL (2004)
A photolabile hydrogel for guided three-dimensional cell growth and migration
Y Luo et al.
NATURE MATERIALS (2004)
Controlling surface morphology of electrospun polystyrene fibers: Effect of humidity and molecular weight in the electrospinning process
CL Casper et al.
MACROMOLECULES (2004)
Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique
TBF Woodfield et al.
BIOMATERIALS (2004)
Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems
DW Hutmacher et al.
TRENDS IN BIOTECHNOLOGY (2004)
Hydroxyapatite coating on titanium substrate with titania buffer layer processed by sol-gel method
HW Kim et al.
BIOMATERIALS (2004)
The use of a novel PLGA fiber/collagen composite web as a scaffold for engineering of articular cartilage tissue with adjustable thickness
GP Chen et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2003)
Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends
KH Tan et al.
BIOMATERIALS (2003)
Preparation of porous hydroxyapatite scaffolds by combination of the gel-casting and polymer sponge methods
HR Ramay et al.
BIOMATERIALS (2003)
A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering
H Yoshimoto et al.
BIOMATERIALS (2003)
Biphasic calcium phosphate bioceramics: preparation, properties and applications
RZ Legeros et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2003)
Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth
MN Cooke et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2003)
Porous PEOT/PBT scaffolds for bone tissue engineering:: Preparation, characterization, and in vitro bone marrow cell culturing
MB Claase et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2003)
Liquid acrylate-endcapped biodegradable poly(ε-caprolactone-co-trimethylene carbonate).: II.: Computer-aided stereolithographic microarchitectural surface photoconstructs
T Matsuda et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
A three-dimensional osteochondral composite scaffold for articular cartilage repair
JK Sherwood et al.
BIOMATERIALS (2002)
Promotion of bone formation using highly pure porous β-TCP combined with bone marrow-derived osteoprogenitor cells
JA Dong et al.
BIOMATERIALS (2002)
Bone growth in biomimetic apatite coated porous Polyactive® 1000PEGT70PBT30 implants
C Du et al.
BIOMATERIALS (2002)
Crystallization at the polymer/calclum-phosphate interface in a sterilized injectable bone substitute IBS
M Schmitt et al.
BIOMATERIALS (2002)
Novel hydrogels as supports for in vitro cell growth:: poly(ethylene glycol)- and gelatine-based (meth)acrylamidopeptide macromonomers
J Zimmermann et al.
BIOMATERIALS (2002)
Influence of ionic strength and carbonate on the Ca-P coating formation from SBFx5 solution
F Barrere et al.
BIOMATERIALS (2002)
Nucleation of biomimetic Ca-P coatings on Ti6Al4V from a SBF x 5 solution: influence of magnesium
F Barrere et al.
BIOMATERIALS (2002)
Biomimetic calcium phosphate coatings on Polyactive® 1000/70/30
C Du et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques
SF Yang et al.
TISSUE ENGINEERING (2002)
Control of pore structure and size in freeze-dried collagen sponges
H Schoof et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2001)
Evaluation of OP-l as a graft substitute for intertransverse process lumbar fusion
JN Grauer et al.
SPINE (2001)
The effect of processing variables on the morphology of electrospun nanofibers and textiles
JM Deitzel et al.
POLYMER (2001)
Closed loop direct metal deposition: art to part
J Mazumder et al.
OPTICS AND LASERS IN ENGINEERING (2000)
Potential applications and delivery strategies for bone morphogenetic proteins
CA Kirker-Head
ADVANCED DRUG DELIVERY REVIEWS (2000)
Fundamentals of biomechanics in tissue engineering of bone
KA Athanasiou et al.
TISSUE ENGINEERING (2000)
The Norwegian Arthroplasty Register -: 11 years and 73,000 arthroplasties
LI Havelin et al.
ACTA ORTHOPAEDICA SCANDINAVICA (2000)
Molecular design of photocurable liquid biodegradable copolymers. 1. Synthesis and photocuring characteristics
T Matsuda et al.
MACROMOLECULES (2000)
Stereolithographic biomodeling to create tangible hard copies of cardiac structures from echocardiographic data - In vitro and in vivo validation
TM Binder et al.
JOURNAL OF THE AMERICAN COLLEGE OF CARDIOLOGY (2000)
Share Paper
