Related references
Note: Only part of the references are listed.Mechanical and degradation characteristics of natural silk and synthetic phosphate glass fiber reinforced polypropylene composites
Quazi T. H. Shubhra et al.
JOURNAL OF COMPOSITE MATERIALS (2011)
Preparation and characterization of natural silk fiber-reinforced polypropylene and synthetic E-glass fiber-reinforced polypropylene composites: a comparative study
A. K. M. M. Alam et al.
JOURNAL OF COMPOSITE MATERIALS (2011)
Physical properties and dyeability of silk fibers degummed with citric acid
Md. Majibur Rahman Khan et al.
BIORESOURCE TECHNOLOGY (2010)
Preparation and characterization of ethanol-treated silk fibroin dense membranes for biomaterials application using waste silk fibers as raw material
Grinia M. Nogueira et al.
BIORESOURCE TECHNOLOGY (2010)
Conductive CNF-reinforced hybrid composites by injection moulding
G. Morales et al.
COMPOSITE STRUCTURES (2010)
Study on the mechanical properties, environmental effect, degradation characteristics and ionizing radiation effect on silk reinforced polypropylene/natural rubber composites
Quazi T. H. Shubhra et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Characterization of Plant and Animal Based Natural Fibers Reinforced Polypropylene Composites and Their Comparative Study
Quazi T. H. Shubhra et al.
FIBERS AND POLYMERS (2010)
Role of Potassium Permanganate and Urea on the Improvement of the Mechanical Properties of Jute Polypropylene Composites
Haydar U. Zaman et al.
FIBERS AND POLYMERS (2010)
Mechanical Properties of the Coir Fiber-reinforced Polypropylene Composites: Effect of the Incorporation of Jute Fiber
Haydaruzzaman et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Fabrication and Characterization of Jute Reinforced Polypropylene Composite: Effectiveness of Coupling Agents
A. H. Khan Haydaruzzaman et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Effect of Silane Treatment on the Mechanical and Interfacial Properties of Calcium Alginate Fiber Reinforced Polypropylene Composite
Avik Khan et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Comparative Studies of Mechanical and Interfacial Properties Between Jute and E-glass Fiber-reinforced Polypropylene Composites
Ruhul A. Khan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Preparation and Characterization of Phosphate Glass Fibers and Fabrication of Poly(caprolactone) Matrix Resorbable Composites
Ruhul A. Khan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Effect of Surface Modification of Jute with Acrylic Monomers on the Performance of Polypropylene Composites
Mubarak A. Khan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Effects of Compatibilizers on Mechanical Properties of Long Glass Fiber-Reinforced Polypropylene
Xiang Fu et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Mechanical, Degradation, and Interfacial Properties of Synthetic Degradable Fiber Reinforced Polypropylene Composites
Ruhul A. Khan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Physicomechanical Properties of Chemically Treated Palm Fiber Reinforced Polypropylene Composites
Mominul Haque et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Mechanical Properties of Polypropylene Composites Reinforced with Chemically Treated Coir and Abaca Fiber
Md Mominul Haque et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Sisal Glass Fiber Reinforced PP Hybrid Composites: Effect of MAPP on the Dynamic Mechanical and Thermal Properties
Sanjay K. Nayak et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Physico-Mechanical Properties of Jute Fiber Reinforced Polypropylene Composites
Md. Rezaur Rahman et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Effect of Compounding and Injection Molding on the Mechanical Properties of Flax Fiber Polypropylene Composites
N. M. Barkoula et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Effect of matrix modification by natural rubber on the performance of silk-reinforced polypropylene composites
Quazi T. H. Shubhra et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Physico-Mechanical Performance of Hybrid Betel Nut (Areca catechu) Short Fiber/Seaweed Polypropylene Composite
M. Masudul Hassan et al.
JOURNAL OF NATURAL FIBERS (2010)
Polylactide-Recycled Wood Fiber Composites
Srikanth Pilla et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Polypropylene Cellulose-Based Composites: The Effect of Bagasse Reinforcement and Polybutadiene Isocyanate Treatment on the Mechanical Properties
Alireza Ashori et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Polypropylene-Bamboo/Glass Fiber Hybrid Composites: Fabrication and Analysis of Mechanical, Morphological, Thermal, and Dynamic Mechanical Behavior
Sushanta K. Samal et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Effect of Gamma Radiation on the Physico-Mechanical and Electrical Properties of Jute Fiber-Reinforced Polypropylene Composites
Mubarak A. Khan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Studies on Recyclable Nylon-reinforced PP Composites: Effect of Fiber Diameter
Thomas N. Abraham et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2009)
Effect of gamma radiation on the performance of jute fabrics-reinforced polypropylene composites
Haydaruzzaman et al.
RADIATION PHYSICS AND CHEMISTRY (2009)
Surface modification of natural fibers using bacteria: Depositing bacterial cellulose onto natural fibers to create hierarchical fiber reinforced nanocomposites
Marion Pommet et al.
BIOMACROMOLECULES (2008)
Wood-plastic composites as promising green-composites for automotive industries!
Alireza Ashori
BIORESOURCE TECHNOLOGY (2008)
The effect of fiber content on the mechanical and thermal expansion properties of biocomposites based on microfibrillated cellulose
Antonio Norio Nakagaito et al.
CELLULOSE (2008)
Jute fiber reinforced polypropylene produced by continuous extrusion compounding, part 1: Processing and ageing properties
M. J. A. van den Oever et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Injection moulding simulation analysis of natural fiber composite window frame
Wan Aizan Wan Abdul Rahman et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Wood fiber reinforced polyethylene and polypropylene composites with high modulus and impact strength
Qiang Yuan et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2008)
Mechanical properties of polypropylene/natural fiber composites: Comparison of wood fiber and cotton fiber
Sam-Jung Kim et al.
POLYMER TESTING (2008)
Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites
A. K. Bledzki et al.
EXPRESS POLYMER LETTERS (2007)
Short natural-fibre reinforced polyethylene and natural rubber composites: Effect of silane coupling agents and fibres loading
M. Abdelmouleh et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Effect of chemical treatments of Alfa (Stipa tenacissima) fibres on water-sorption properties
A. Bessadok et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Injection-molded short hemp fiber/glass fiber-reinforced polypropylene hybrid composites - Mechanical, water absorption and thermal properties
Suhara Panthapulakkal et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Mechanical properties of polypropylene composites based on natural fibers subjected to multiple extrusion cycles
J. Moran et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Pultrusion of a flax/polypropylene yarn
I. Angelov et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Kenaf natural fiber reinforced polypropylene composites: A discussion on manufacturing problems and solutions
M. Zampaloni et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Optimising industrial hemp fibre for composites
K. L. Pickering et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Evaluation of interphase properties in a cellulose fiber-reinforced polypropylene composite by nanoindentation and finite element analysis
Seung-Hwan Lee et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Mechanical properties of wood-fiber reinforced polypropylene composites: Effect of a novel compatibilizer with isocyanate functional group
Ajay Karmarkar et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Flammability of wood-polypropylene composites
Slawomir Borysiak et al.
POLYMER DEGRADATION AND STABILITY (2006)
Natural-fiber-reinforced polymer composites applications in automotive
James Holbery et al.
JOM (2006)
Functionalization, compatibilization and properties of polypropylene composites with Hemp fibres
Mariano Pracella et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Nanocomposites of isotactic polypropylene reinforced with rod-like cellulose whiskers
N. Ljungberg et al.
POLYMER (2006)
Properties of lignocellulosic material filled polypropylene bio-composites made with different manufacturing processes
Han-Seung Yang et al.
POLYMER TESTING (2006)
Mechanical and thermal properties of waste silk fiber-reinforced poly(butylene succinate) biocomposites
SO Han et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Jute/polypropylene composites I.: Effect of matrix modification
TTL Doan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Resistance of high-content polypropylene/wood composites to low-current arc discharges
Zenon Tartakowski et al.
POLYMER TESTING (2006)
Lightweight laminate composites made from kenaf and polypropylene fibres
S Shibata et al.
POLYMER TESTING (2006)
Influence of orientation and volume fraction of Aramid fabric on abrasive wear performance of polyethersulfone composites
J Bijwe et al.
WEAR (2006)
Utilization of waste silk fabric as reinforcement for acrylonitrile butadiene styrene toughened epoxy matrix
SK Rai et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)
A novel processing technique for thermoplastic manufacturing of unidirectional composites reinforced with jute yarns
O. A. Khondker et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
High-tenacity man-made cellulose fibre reinforced thermoplastics - Injection moulding compounds with polypropylene and alternative matrices
J. Ganster et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Mechanical properties of short-flax-fibre reinforced compounds
Harriette L. Bos et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Effects of fiber nonlinear properties on the compressive strength prediction of unidirectional carbon-fiber composites
T Yokozeki et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Performance of pultruded jute fibre reinforced phenolic composites as building materials for door frame
B Singh et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2005)
Injection molding of long sisal fiber-reinforced polypropylene:: Effects of compatibilizer concentration and viscosity on fiber adhesion and thermal degradation
LM Arzondo et al.
POLYMER ENGINEERING AND SCIENCE (2005)
Thermal behavior of liquefied wood polymer composites (LWPC)
GH Doh et al.
COMPOSITE STRUCTURES (2005)
Characterization of composites based on natural and glass fibers obtained by vacuum infusion
E Rodriguez et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Interface modification and mechanical properties of natural fiber-polyolefin composite products
M Sain et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2005)
Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization
A Arbelaiz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Environmentally degradable bio-based polymeric blends and composites
E Chiellini et al.
MACROMOLECULAR BIOSCIENCE (2004)
Effect of wood fibers on the rheological properties of i-PP/wood fiber composites
SN Maiti et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Unidirectional hemp and flax EP- and PP-composites: Influence of defined fiber treatments
AK Bledzki et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Influence of concentration of aramid fabric on abrasive wear performance of polyethersulfone composites
J Bijwe et al.
TRIBOLOGY LETTERS (2004)
Influence of fiber treatment on the performance of sisal-polypropylene composites
S Mohanty et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
The effect of maleic anhydride modified polypropylene on the mechanical properties of feather fiber, kraft pulp, polypropylene composites
TA Bullions et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Effect of process engineering on the performance of natural fiber reinforced cellulose acetate biocomposites
AK Mohanty et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Effect of MAPP as coupling agent on the performance of sisal-PP composites
S Mohanty et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2004)
Maleated coupling agents for natural fibre composites
TJ Keener et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Mechanical properties of continuous natural fibre-reinforced polymer composites
PJ Herrera-Franco et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Affect of dope additives on finishing behavior of carbon fiber precursors
C Hou et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Sheet-molded polyolefin natural fiber composites for automotive applications
M Pervaiz et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2003)
Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene composites
G Cantero et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Natural fibres: can they replace glass in fibre reinforced plastics?
P Wambua et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Influence of processing and chemical treatment of flax fibres on their composites
I Van de Weyenberg et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Polarity parameters and dynamic mechanical behaviour of chemically modified banana fiber reinforced polyester composites
LA Pothan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Physical and mechanical properties of unidirectional plant fibre composites - an evaluation of the influence of porosity
B Madsen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
An investigation on the processing of sisal fibre reinforced polypropylene composites
KL Fung et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Short jute fiber reinforced polypropylene composites: effect of compatibiliser, impact modifier and fiber loading
AK Rana et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Comparative study of maleated polyolefins as compatibilizers for polyethylene/wood flour composites
SM Lai et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Interface behavior in polypropylene composites
S Mukhopadhyay et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2003)
The thermal and crystallisation studies of short sisal fibre reinforced polypropylene composites
PV Joseph et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Effect of material and process parameters on the mechanical properties of unidirectional and multidirectional flax/polypropylene composites
K Van de Velde et al.
COMPOSITE STRUCTURES (2003)
Comparative architecture of silks, fibrous proteins and their encoding genes in insects and spiders
CL Craig et al.
COMPARATIVE BIOCHEMISTRY AND PHYSIOLOGY B-BIOCHEMISTRY & MOLECULAR BIOLOGY (2002)
Study of the thermal behavior of alkali-treated jute fibers
D Ray et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Improved acoustic Behavior of interior parts of renewable resources in the automotive industry
A Nick et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2002)
Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase
C Baley
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Dynamic mechanical and thermal analysis of vinylester-resin-matrix composites reinforced with untreated and alkali-treated jute fibres
D Ray et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Environmental effects on the degradation behaviour of sisal fibre reinforced polypropylene composites
PV Joseph et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Grafting of different monomers onto jute yarn by in situ UV-radiation method: Effect of additives
MA Khan et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2002)
A review on interface modification and characterization of natural fiber reinforced plastic composites
J George et al.
POLYMER ENGINEERING AND SCIENCE (2001)
Relationship between processing and properties of biodegradable composites based on PCL/starch matrix and sisal fibers
VP Cyras et al.
POLYMER COMPOSITES (2001)
Natural fibre reinforced sheet moulding compound
B van Voorn et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Influence of novel coupling agents on mechanical properties of jute reinforced polypropylene composite
MA Khan et al.
JOURNAL OF MATERIALS SCIENCE LETTERS (2001)
Mechanical properties of natural fibre mat reinforced thermoplastic
K Oksman
APPLIED COMPOSITE MATERIALS (2000)
Mechanical properties of natural-fibre-mat-reinforced thermoplastics based on flax fibres and polypropylene
SK Garkhail et al.
APPLIED COMPOSITE MATERIALS (2000)
The manufacture and mechanical testing of thermosetting natural fibre composites
DG Hepworth et al.
JOURNAL OF MATERIALS SCIENCE (2000)
Effects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites
J Gassan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
Kapok/cotton fabric-polypropylene composites
LY Mwaikambo et al.
POLYMER TESTING (2000)
Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites
SY Fu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)
Share Paper
