4.7 Article Proceedings Paper

Self-reactive rating of thermal runaway hazards on 18650 lithium-ion batteries

Journal

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Volume 106, Issue 1, Pages 159-163

Publisher

SPRINGER
DOI: 10.1007/s10973-011-1452-6

Keywords

Adiabatic calorimetric methodology; 18650 lithium-ion batteries; Runaway characteristics; Thermal hazard; Vent sizing package 2 (VSP2)

Ask authors/readers for more resources

Vent sizing package 2 (VSP2) was used to measure the thermal hazard and runaway characteristics of 18650 lithium-ion batteries, which were manufactured by Sanyo Electric Co., Ltd. Runaway reaction behaviors of these batteries were obtained: 50% state of charge (SOC), and 100% SOC. The tests evaluated the thermal hazard characteristics, such as initial exothermic temperature (T-0), self-heating rate (dT dt(-1)), pressure-rise rate (dP dt(-1)), pressure temperature profiles, maximum temperature, and pressure which were observed by adiabatic calorimetric methodology via VSP2 using customized test cells. The safety assessment of lithium-ion cells proved to be an important subject. The maximum self-heating rate (dT dt(-1))(max) and the largest pressure-rise rate (dP dt(-1))(max) of Sanyo 18650 lithium-ion battery of 100% SOC were measured to be 37,468.8 degrees C min(-1) and 10,845.6 psi min(-1), respectively, and the maximum temperature was 733.1 degrees C. Therefore, a runaway reaction is extremely serious when a lithium-ion battery is exothermic at 100% SOC. This result also demonstrated that the thermal VSP2 is an alternative method of thermal hazard assessment for battery safety research. Finally, self-reactive ratings on thermal hazards of 18650 lithium-ion batteries were studied and elucidated to a deeper extent.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available