Related references
Note: Only part of the references are listed.Tunable and Durable Toughening of Polylactide Materials Via Reactive Extrusion
Georgio Kfoury et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2014)
Toughening of poly (lactic acid) by poly (β-hydroxybutyrate-co-β-hydroxyvalerate) with high β-hydroxyvalerate content
P. Ma et al.
EUROPEAN POLYMER JOURNAL (2013)
Toughening of polylactide by tailoring phase-morphology with P[CL-co-LA] random copolyesters as biodegradable impact modifiers
Jeremy Odent et al.
EUROPEAN POLYMER JOURNAL (2013)
Compatibilization in bio-based and biodegradable polymer blends
B. Imre et al.
EUROPEAN POLYMER JOURNAL (2013)
A study of the deformation-induced whitening phenomenon for cavitating and non-cavitating semicrystalline polymers
Laurent Farge et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2013)
Thermal, mechanical and rheological properties of polylactide toughened by expoxidized natural rubber
Chunmei Zhang et al.
MATERIALS & DESIGN (2013)
Preparation and characterization of polylactide/poly(polyethylene glycol-co-citric acid) blends
Zongyan Gui et al.
POLYMER BULLETIN (2013)
Morphology and properties of the biosourced poly(lactic acid)/poly(ethylene oxide-b-amide-12) blends
Lijing Han et al.
POLYMER COMPOSITES (2013)
Thermal, mechanical, and rheological properties of polylactide/poly(1,2-propylene glycol adipate)
Huiliang Zhang et al.
POLYMER ENGINEERING AND SCIENCE (2013)
Improvement in Toughness and Crystallization of Poly(L-lactic acid) by Melt Blending with Ethylene/Methyl Acrylate/Glycidyl Methacrylate Terpolymer
Xin Zhang et al.
POLYMER ENGINEERING AND SCIENCE (2013)
Highly efficient toughening effect of ultrafine full-vulcanized powdered rubber on poly(lactic acid)(PLA)
Qinna Zhao et al.
POLYMER TESTING (2013)
Random aliphatic copolyesters as new biodegradable impact modifiers for polylactide materials
Jeremy Odent et al.
EUROPEAN POLYMER JOURNAL (2012)
New development on plasticized poly(lactide): Chemical grafting of citrate on PLA by reactive extrusion
Fatima Hassouna et al.
EUROPEAN POLYMER JOURNAL (2012)
Transparent and ductile poly(lactic acid)/poly(butyl acrylate) (PBA) blends: Structure and properties
Bing Meng et al.
EUROPEAN POLYMER JOURNAL (2012)
Characterization of the mesostructure of HDPE under in situ uniaxial tensile test by incoherent polarized steady-light transport
A. Blaise et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2012)
Utilization of ultrafine acrylate rubber particles as a toughening agent for poly(lactic acid)
Nawadon Petchwattana et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Effects of ionomer characteristics on reactions and properties of poly(lactic acid) ternary blends prepared by reactive blending
Wenjia Song et al.
POLYMER (2012)
Poly(lactic acid) crystallization
Sajjad Saeidlou et al.
PROGRESS IN POLYMER SCIENCE (2012)
New approach on the development of plasticized polylactide (PLA): Grafting of poly(ethylene glycol) (PEG) via reactive extrusion
Fatima Hassouna et al.
EUROPEAN POLYMER JOURNAL (2011)
Morphologies and Mechanical Properties of Polylactide/Thermoplastic Polyurethane Elastomer Blends
Fei Feng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Preparation and Characterization of Biodegradable Polylactide/Thermoplastic Polyurethane Elastomer Blends
Juan-Juan Han et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Preparation and Recycling of Plasticized PLA
Roberto Scaffaro et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2011)
Interaction of Microstructure and Interfacial Adhesion on Impact Performance of Polylactide (PLA) Ternary Blends
Hongzhi Liu et al.
MACROMOLECULES (2011)
Structure and properties of polylactide/natural rubber blends
N. Bitinis et al.
MATERIALS CHEMISTRY AND PHYSICS (2011)
The Fracture Mechanism of Polylactic Acid Resin and the Improving Mechanism of Its Toughness by Addition of Acrylic Modifier
Masakazu Ito et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Impact Modification of Polylactide with a Biodegradable Ethylene/Acrylate Copolymer
Kojo A. Afrifah et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2010)
Super Toughened Poly(lactic acid) Ternary Blends by Simultaneous Dynamic Vulcanization and Interfacial Compatibilization
Hongzhi Liu et al.
MACROMOLECULES (2010)
Plasticization of poly(lactide) with blends of tributyl citrate and low molecular weight poly(D,L-lactide)-b-poly(ethylene glycol) copolymers
Yahia Lemmouchi et al.
EUROPEAN POLYMER JOURNAL (2009)
Processing and Characterization of Poly(lactic acid) Films Plasticized with Commercial Adipates
V. P. Martino et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Chain Transfer to Polymer and Branching in Controlled Radical Polymerizations of n-Butyl Acrylate
Nasir M. Ahmad et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2009)
Acrylate Free Radical Polymerization: From Mechanism to Polymer Design
Christopher Barner-Kowollik
MACROMOLECULAR RAPID COMMUNICATIONS (2009)
Consideration of Macromonomer Reactions in n-Butyl Acrylate Free Radical Polymerization
Wei Wang et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2009)
Historic Account of the Development in the Understanding of the Propagation Kinetics of Acrylate Radical Polymerizations
Alex M. van Herk
MACROMOLECULAR RAPID COMMUNICATIONS (2009)
EPR Analysis of n-Butyl Acrylate Radical Polymerization
Johannes Barth et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2009)
The Role of Mid-Chain Radicals in Acrylate Free Radical Polymerization: Branching and Scission
Tanja Junkers et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2008)
Recent advances in reactive extrusion processing of biodegradable polymer-based compositions
Jean-Marie Raquez et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2008)
Processing technologies for poly(lactic acid)
L-T Lim et al.
PROGRESS IN POLYMER SCIENCE (2008)
Block copolymers and melt blends of polylactide with Nodax™ microbial polyesters:: Preparation and mechanical properties
K. M. Schreck et al.
JOURNAL OF BIOTECHNOLOGY (2007)
Largely improved toughness of PP/EPDM blends by adding nano-SiO2 particles
Hong Yang et al.
POLYMER (2007)
Plasticization of poly(L-lactide) with poly(propylene glycol)
Z. Kulinski et al.
BIOMACROMOLECULES (2006)
Thermo-mechanical characterization of plasticized PLA: Is the miscibility the only significant factor?
Isabelle Pillin et al.
POLYMER (2006)
PLP-ESR monitoring of midehain radicals in n-butyl acrylate polymerization
RXE Willemse et al.
MACROMOLECULES (2005)
Preparation and properties of a novel class of polyhydroxyalkanoate copolymers
I Noda et al.
BIOMACROMOLECULES (2005)
Polymer alloys of Nodax copolymers and poly(lactic acid)
I Noda et al.
MACROMOLECULAR BIOSCIENCE (2004)
The influence of block copolymer microstructure on the toughness of compatibilized polylactide/polyethylene blends
KS Anderson et al.
POLYMER (2004)
Raman spectroscopic study of conformational changes in the amorphous phase of poly(lactic acid) during deformation
XZ Yang et al.
POLYMER (2004)
Toughening of polylactide by melt blending with linear low-density polyethylene
KS Anderson et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Thermal and mechanical properties of plasticized poly(L-lactic acid)
M Baiardo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Aging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularity
Y Hu et al.
POLYMER (2003)
Aging of poly(lactide)/poly(ethylene glycol) blends. Part 2. Poly(lactide) with high stereoregularity
Y Hu et al.
POLYMER (2003)
Poly(lactic acid):: plasticization and properties of biodegradable multiphase systems
O Martin et al.
POLYMER (2001)
Share Paper
