Related references
Note: Only part of the references are listed.Competitive anion/anion interactions on copper surfaces relevant for Damascene electroplating
N. T. M. Hai et al.
ELECTROCHIMICA ACTA (2012)
Electrochemical Cu Growth on MPS-Modified Au(111) Electrodes
Klaus Krug et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
In Situ STM Study of Cu Electrodeposition on TBPS-Modified Au(111) Electrodes
Yung-Fang Liu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Electrolyte Additive Chemistry and Feature Size-Dependent Impurity Incorporation for Cu Interconnects
J. Kelly et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Extreme Bottom-Up Superfilling of Through-Silicon-Vias by Damascene Processing: Suppressor Disruption, Positive Feedback and Turing Patterns
T. P. Moffat et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Adsorption and Desorption of Bis-(3-sulfopropyl) Disulfide during Cu Electrodeposition and Stripping at Au Electrodes
Yong-Da Chiu et al.
LANGMUIR (2012)
Low-resistivity Cu film electrodeposited with 3-N,N-dimethylaminodithiocarbamoyl-1-propanesulfonate for the application to the interconnection of electronic devices
Sung Ki Cho et al.
THIN SOLID FILMS (2012)
Low-Cost Thin Glass Interposers as a Superior Alternative to Silicon and Organic Interposers for Packaging of 3-D ICs
Vijay Sukumaran et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2012)
Highly Selective Cu Electrodeposition for Filling Through Silicon Holes
Wei-Ping Dow et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2011)
Classification of suppressor additives based on synergistic and antagonistic ensemble effects
P. Broekmann et al.
ELECTROCHIMICA ACTA (2011)
Scanning Tunneling Microscopy and Cyclic Voltammetry Study of Self-Assembled 3,3′-Thiobis(1-propanesulfonic acid, sodium salt) Monolayers on Au(111) Electrodes
Yung-Fang Liu et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2011)
In Situ Scanning Tunneling Microscopy Study of 3-Mercaptopropanesulfonate Adsorbed on Pt(111) and Electrodeposition of Copper in 0.1 M KClO4+1 mM HCl (pH 3)
PoYu Yen et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2011)
Sensitivity Enhancement for Quantitative Electrochemical Determination of a Trace Amount of Accelerator in Copper Plating Solutions
Yong-Da Chiu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)
Influence of Aromatic Functionality on Quaternary Ammonium Levelers for Cu Plating
Jeremy J. Hatch et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)
NMR Spectral Studies of Interactions Between the Accelerants SPS and MPS and Copper Chlorides
Elizabeth Garcia-Cardona et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)
In Situ STM Imaging of Bis-3-sodiumsulfopropyl-disulfide Molecules Adsorbed on Copper Film Electrodeposited on Pt(111) Single Crystal Electrode
HsinLing Tu et al.
LANGMUIR (2011)
A general model of metal underpotential deposition in the presence of thiol-based additives based on an in situ STM study
Yuriy Yanson et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)
In Situ STM of 3-Mercaptopropanesulfonate Adsorbed on Pt(111) Electrode and Its Effect on the Electrodeposition of Copper
HsinLing Tu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
Accelerator Surface Phase Associated with Superconformal Cu Electrodeposition
T. P. Moffat et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
Effect of Chloride Ions on the Adsorption of 3-Mercapto-1-propanesulfonic acid and Bis(3-sulfopropyl)-disulfide on a Au(111) Surface
Yung-Fang Liu et al.
LANGMUIR (2010)
Microvia filling by copper electroplating using diazine black as a leveler
Wei-Ping Dow et al.
ELECTROCHIMICA ACTA (2009)
Filling of microvia with an aspect ratio of 5 by copper electrodeposition
O. Luehn et al.
ELECTROCHIMICA ACTA (2009)
Microvia Filling by Cu Electroplating Over a Au Seed Layer Modified by a Disulfide
Wei-Ping Dow et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Copper Fill of Microvia Using a Thiol-Modified Cu Seed Layer and Various Levelers
Wei-Ping Dow et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
3-Mercapto-1-propanesulfonic acid and Bis(3-sulfopropyl) Disulfide Adsorbed on Au(111): In Situ Scanning Tunneling Microscopy and Electrochemical Studies
Zheng-Yan Jian et al.
LANGMUIR (2009)
Two-step filling in Cu electroless deposition using a concentration-dependent effect of 3-N,N-dimethylaminodithiocarbamoyl-1-propanesulfonic acid
Chang Hwa Lee et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2008)
Adsorption of the additives MPA, MPSA, and SPS onto Cu(111) from sulfuric acid solutions
C. E. Taeubert et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
The role of SPS, MPSA, and chloride in additive systems for copper electrodeposition
Min Tan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
Analytical study of the characteristics of Cu(I) species for the via-filling electroplating using a RRDE
Toshikazu Okubo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
In situ EC-STM studies of MPS, SPS, and chloride on Cu(100): Structural studies of accelerators for dual damascene electrodeposition
Sang-Eun Bae et al.
LANGMUIR (2006)
Competitive adsorption of PEG, Cl-, and SPS/MPS on Cu: An in situ ellipsometric study
ML Walker et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Vibrational spectroscopic and mass spectrometric studies of the interaction of bis(3-sulfopropyl)-disulfide with Cu surfaces
ZD Schultz et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Cationic Surfactants for the control of overfill bumps in Cu superfilling
S. -K. Kim et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Aspect-ratio-dependent copper electrodeposition technique for very high aspect-ratio through-hole plating
P Dixit et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Evaluating the filling performance of a copper plating formula using a simple galvanostat method
WP Dow et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
The chemistry of additives in damascene copper plating
PM Vereecken et al.
IBM JOURNAL OF RESEARCH AND DEVELOPMENT (2005)
Superconformal film growth: Mechanism and quantification
TP Moffat et al.
IBM JOURNAL OF RESEARCH AND DEVELOPMENT (2005)
Development of less expensive process technologies for three-dimensional chip stacking with through-vias
K Takahashi et al.
ELECTRONICS AND COMMUNICATIONS IN JAPAN PART II-ELECTRONICS (2005)
Microvia filling over self-assembly disulfide molecule on Au and Cu seed layers - A morphological study of copper deposits
WP Dow et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)
High-aspect-ratio copper-via-filling for three-dimensional chip stacking - II. Reduced electrodeposition process time
K Kondo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Effects of additives on copper electrodeposition in submicrometer trenches
M Hasegawa et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Role of chloride ions in suppression of copper electrodeposition by polyethylene glycol
KR Hebert
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Roles of chloride ion in microvia filling by copper electrodeposition - II. Studies using EPR and galvanostatic measurements
WP Dow et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Superconformal Cu electrodeposition using DPS a substitutive accelerator for bis(3-sulfopropyl) disulfide
SK Cho et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Effect of organic additives on structure, resistivity, and room-temperature recrystallization of electrodeposited copper
VA Vas'ko et al.
MICROELECTRONIC ENGINEERING (2004)
Electrodeposition of copper in the SPS-PEG-Cl additive system - I. Kinetic measurements: Influence of SPS
TP Moffat et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)
Role of additives for copper damascene electrodeposition experimental study on inhibition and acceleration effects
K Kondo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)
Copper damascene electrodeposition and additives
K Kondo et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2003)
Electrochemical processing technologies in chip fabrication: challenges and opportunities
M Datta
ELECTROCHIMICA ACTA (2003)
Inhibition due to the interaction of polyethylene glycol, chloride, and copper in plating baths: A surface-enhanced Raman study
ZV Feng et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2003)
Interactions between brightener and chloride ions on copper electroplating for laser-drilled via-hole filling
WP Dow et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2003)
High-aspect-ratio copper via filling used for three-dimensional chip stacking
JJ Sun et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Structures of monolayers formed from different HS-(CH2)(2)-X thiols on gold, silver and copper: comparitive studies by surface-enhanced Raman scattering
A Kudelski
JOURNAL OF RAMAN SPECTROSCOPY (2003)
Via-filling using electroplating for build-up PCBs
T Kobayashi et al.
ELECTROCHIMICA ACTA (2001)
A superfilling model that predicts bump formation
AC West et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2001)
Copper electrodeposition: Principles and recent progress
J Reid
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS (2001)
Superconformal electrodeposition of copper
TP Moffat et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2001)
Share Paper
