Electrochemical studies on Zn deposition and dissolution in sulphate electrolyte

The electrochemical deposition and dissolution of Zn on Pt electrode in sulphate electrolyte was investigated by electrochemical methods in an attempt to contribute to the better understanding of the more complex Zn-Cr alloy electrodeposition process. A decrease of the Zn electrolyte pH (from 5.4 to 1.0) so as to minimise/avoid the formation of hydroxo-products of Cr in the electrolyte for deposition of alloy coatings decreases the current efficiency for the Zn reaction, but the rate of the cathode reaction increases significantly due to intense hydrogen evolution. The results of the investigations in Zn electrolytes with pH 1.0-1.6 indicate that Zn bulk deposition is preceded by hydrogen evolution, stepwise Zn underpotential deposition (UPD) and formation of a Zn-Pt alloy. Hydrogen evolution from H2O starts in the potential range of Zn bulk deposition. Data obtained from the electrochemical quartz crystal microbalance (EQCM) measurements support the assumption that electrochemical deposition of Zn proceeds at potentials more positive than the reversible potential of Zn. Anodic potentiodynamic curves for galvanostatically and potentiostatically deposited Zn layers provide indirect evidence about the dissolution of Zn from an alloy with the Pt substrate. The presumed potential of co-deposition of Cr (-1.9 V vs. Hg/Hg2SO4) is reached at a current density of about 300 mA cm(-2).