Zero solvent emission process for sulfur dioxide recovery using a membrane contactor and ionic liquids

Selective absorption into a liquid is a widespread method to separate and concentrate sulfur dioxide from gas emissions, reducing air pollution and environmental risks. Process intensification can be performed first by the substitution of the equipment (e.g. scrubbers) for a membrane device to avoid drops dragging, and second by the substitution of the absorption solvent (e.g. N,N-dimethylaniline) for ionic liquids to avoid solvent volatilization. According to this intensification, a zero solvent emission process has been developed. The ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate is used as the absorption solvent and the results are compared to the N,N-dimethylaniline results. A ceramic hollow fibre module is the membrane device where the sulfur dioxide absorption takes place. A gas stream with a typical composition of roasting effluents flows through the shell side and the absorption liquid flows counter currently by the inside of the hollow fibres. The influence of carbon dioxide in the absorption is also evaluated and the overall mass transfer coefficients are calculated. The difference between the estimated mass transfer coefficients and the experimental results for both solvents is discussed assuming partial wetting of the membrane. (C) 2008 Elsevier B.V. All rights reserved.