Related references
Note: Only part of the references are listed.Reliability enhancement of Sn-1.0Ag-0.5Cu nano-composite solders by adding multiple sizes of TiO2 nanoparticles
Yanni Wen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Influence of Ce addition on Sn-3.0Ag-0.5Cu solder joints: Thermal behavior, microstructure and mechanical properties
Xiaoxuan Tu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Influence of Ag-modified graphene nanosheets addition into Sn-Ag-Cu solders on the formation and growth of intermetallic compound layers
H. Y. Jing et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effects of Ag addition on solid-state interfacial reactions between Sn-Ag-Cu solder and Cu substrate
Ming Yang et al.
MATERIALS CHARACTERIZATION (2017)
Lead free Sn-Ag-Cu solders reinforced by Ni-coated graphene nanosheets prepared by mechanical alloying: Microstructural evolution and mechanical durability
F. Khodabakhshi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
TEM investigation of interfacial microstructure and fracture mode of the Sn-Ag-Cu/Ni joint system
C. E. Ho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effects of Ag content on the interfacial reactions between liquid Sn-Ag-Cu solders and Cu substrates during soldering
Ming Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effect of alumina nanoparticles on the microstructure and mechanical durability of meltspun lead-free solders based on tin alloys
K. Mehrabi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Microstructures and properties of new Sn-Ag-Cu lead-free solder reinforced with Ni-coated graphene nanosheets
Guang Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effect of Yttrium on the Fracture Strength of the Sn-1.0Ag-0.5Cu Solder Joints
Hyelim Choi et al.
JOURNAL OF ELECTRONIC MATERIALS (2016)
Effect of Pr Addition on Properties of Sn-0.5Ag-0.7Cu-0.5Ga Lead-Free Solder
Nan Xujing et al.
JOURNAL OF ELECTRONIC MATERIALS (2016)
Improving shear strength of Sn-3.0Ag-0.5Cu/Cu joints and suppressing intermetallic compounds layer growth by adding graphene nanosheets
Yilong Huang et al.
MATERIALS LETTERS (2016)
Design and performance of Ag nanoparticle-modified graphene/SnAgCu lead-free solders
Lianyong Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of nano-Al2O3 reinforcement on the microstructure and reliability of Sn-3.0Ag-0.5Cu solder joints
Zhenyu Zhao et al.
MICROELECTRONICS RELIABILITY (2016)
Development of new multicomponent Sn-Ag-Cu-Bi lead-free solders for low-cost commercial electronic assembly
A. A. El-Daly et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effects of Ga addition on microstructure and properties of Sn-Ag-Cu/Cu solder joints
Q. K. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Microstructural modifications and properties of low-Ag-content Sn-Ag-Cu solder joints induced by Zn alloying
A. A. El-Daly et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effects of graphene nanosheets on interfacial reaction of Sn-Ag-Cu solder joints
Lianyong Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Interfacial reactions between Cu and SnAgCu solder doped with minor Ni
Hsi-Kuei Cheng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Interfacial compounds growth of SnAgCu(nano La2O3)/Cu solder joints based on experiments and FEM
Liang Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effect of nano-Fe2O3 additions on wettability and interfacial intermetallic growth of low-Ag content Sn-Ag-Cu solders on Cu substrates
Yue Gu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effects of Fe2NiO4 nanoparticles addition into lead free Sn-3.0Ag-0.5Cu solder pastes on microstructure and mechanical properties after reflow soldering process
Srivalli Chellvarajoo et al.
MATERIALS & DESIGN (2015)
Influence of nanoparticle addition on the formation and growth of intermetallic compounds (IMCs) in Cu/Sn-Ag-Cu/Cu solder joint during different thermal conditions
Ai Ting Tan et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2015)
Influence of La2O3 nanoparticle additions on microstructure, wetting, and tensile characteristics of Sn-Ag-Cu alloy
Ashutosh Sharma et al.
MATERIALS & DESIGN (2015)
Properties enhancement of low Ag-content Sn-Ag-Cu lead-free solders containing small amount of Zn
A. A. El-Daly et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Effects of indium addition on properties and wettability of Sn-0.7Cu-0.2Ni lead-free solders
L. F. Li et al.
MATERIALS & DESIGN (2014)
Properties enhancement of SnAgCu solders containing rare earth Yb
Liang Zhang et al.
MATERIALS & DESIGN (2014)
Influence of Zn addition on the microstructure, melt properties and creep behavior of low Ag-content Sn-Ag-Cu lead-free solders
A. A. El-Daly et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Growth mechanism of intermetallic compounds and damping properties of Sn-Ag-Cu-1 wt% nano-ZrO2 composite solders
Asit Kumar Gain et al.
MICROELECTRONICS RELIABILITY (2014)
Influence of Ni nanoparticle on the morphology and growth of interfacial intermetallic compounds between Sn-3.8Ag-0.7Cu lead-free solder and copper substrate
S. L. Tay et al.
INTERMETALLICS (2013)
Influence of TiO2 nanoparticles on IMC growth in Sn-3.0Ag-0.5Cu-xTiO2 solder joints in reflow process
Y. Tang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Properties and interfacial microstructure of Sn-Zn-Ga solder joint with rare earth Pr addition
Huan Ye et al.
MATERIALS & DESIGN (2013)
Effect of graphene nanosheets reinforcement on the performance of Sn-Ag-Cu lead-free solder
X. D. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Texture evolution and its effects on growth of intermetallic compounds formed at eutectic Sn37Pb/Cu interface during solid-state aging
Ming Yang et al.
INTERMETALLICS (2012)
Effect of trace Al on growth rates of intermetallic compound layers between Sn-based solders and Cu substrate
J. F. Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Intermetallic compound growth suppression at high temperature in SAC solders with Zn addition on Cu and Ni-P substrates
H. R. Kotadia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Interface reaction between SnAgCu/SnAgCuCe solders and Cu substrate subjected to thermal cycling and isothermal aging
Liang Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Stability of molybdenum nanoparticles in Sn-3.8Ag-0.7Cu solder during multiple reflow and their influence on interfacial intermetallic compounds
A. S. M. A. Haseeb et al.
MATERIALS CHARACTERIZATION (2012)
Interfacial reaction and elemental redistribution in Sn3.0Ag0.5Cu-xPd/immersion Au/electroless Ni solder joints after aging
I-Tai Wang et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2012)
Evolution of nano-Ag3Sn particle formation on Cu-Sn intermetallic compounds of Sn3.5Ag0.5Cu composite solder/Cu during soldering
L. C. Tsao
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Influence of SrTiO3 nano-particles on the microstructure and shear strength of Sn-Ag-Cu solder on Au/Ni metallized Cu pads
Tama Fouzder et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Kinetics of intermetallic phase formation at the interface of Sn-Ag-Cu-X (X = Bi, In) solders with Cu substrate
Erika Hodulova et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Microstructure, kinetic analysis and hardness of Sn-Ag-Cu-1 wt% nano-ZrO2 composite solder on OSP-Cu pads
Asit Kumar Gain et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Suppressing effect of 0.5 wt.% nano-TiO2 addition into Sn-3.5Ag-0.5Cu solder alloy on the intermetallic growth with Cu substrate during isothermal aging
L. C. Tsao
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Reaction of Liquid Sn-Ag-Cu-Ce Solders with Solid Copper
J. Chriastel'ova et al.
JOURNAL OF ELECTRONIC MATERIALS (2011)
Study of interfacial reactions between Sn3.5Ag0.5Cu composite alloys and Cu substrate
L. C. Tsao et al.
MICROELECTRONIC ENGINEERING (2011)
Effect of additions of ZrO2 nano-particles on the microstructure and shear strength of Sn-Ag-Cu solder on Au/Ni metallized Cu pads
Asit Kumar Gain et al.
MICROELECTRONICS RELIABILITY (2011)
Microstructure, thermal analysis and hardness of a Sn-Ag-Cu-1 wt% nano-TiO2 composite solder on flexible ball grid array substrates
Asit Kumar Gain et al.
MICROELECTRONICS RELIABILITY (2011)
Effect of Cu concentration, solder volume, and temperature on the reaction between SnAgCu solders and Ni
S. C. Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Investigation of gap filling ability of Ag-Cu-In brazing filler metals
L. Sisamouth et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Reactions of Sn-3.5Ag-Based Solders Containing Zn and Al Additions on Cu and Ni(P) Substrates
H. R. Kotadia et al.
JOURNAL OF ELECTRONIC MATERIALS (2010)
Growth Behavior of Intermetallic Compounds at SnAgCu/Ni and Cu Interfaces
Lihua Qi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2010)
Effects of nano-Al2O3 additions on microstructure development and hardness of Sn3.5Ag0.5Cu solder
L. C. Tsao et al.
MATERIALS & DESIGN (2010)
Effect of indium on the microstructure of the interface between Sn3.13Ag0.74CuIn solder and Cu substrate
Pavol Sebo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Evolutions of the interface and shear strength between SnAgCu-xNi solder and Cu substrate during isothermal aging at 150°C
Ping Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Kinetics of intermetallic compound layers and shear strength in Bi-bearing SnAgCu/Cu soldering couples
Jie Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effects of minor Fe, Co, and Ni additions on the reaction between SnAgCu solder and Cu
Y. W. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effects of small amount addition of rare earth Er on microstructure and property of SnAgCu solder
Yaowu Shi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Effects of multiple reflows on intermetallic morphology and shear strength of SnAgCu-xNi composite solder joints on electrolytic Ni/Au metallized substrate
Pei Yao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
One- and two-dimensional diffusion of metal atoms in graphene
Yanjie Gan et al.
SMALL (2008)
The effect of the addition of In on the reaction and mechanical properties of Sn-1.0Ag-0.5Cu solder alloy
A-Mi Yu et al.
METALS AND MATERIALS INTERNATIONAL (2007)
Effects of minor additions of Zn on interfacial reactions of Sn-Ag-Cu and Sn-Cu solders with various Cu substrates during thermal aging
Moon Gi Cho et al.
JOURNAL OF ELECTRONIC MATERIALS (2007)
Properties of Sn3.8AgO.7Cu solder alloy with trace rare earth element Y additions
H. Hao et al.
JOURNAL OF ELECTRONIC MATERIALS (2007)
Massive spalling of intermetallic compounds in solder-substrate reactions due to limited supply of the active element
S. C. Yang et al.
JOURNAL OF APPLIED PHYSICS (2007)
Incremental recrystallization/grain growth driven by elastic strain energy release in a thermomechanically fatigued lead-free solder joint
A. U. Telang et al.
ACTA MATERIALIA (2007)
Shear strength and interfacial microstructure of Sn-Ag-xNi/Cu single shear lap solder joints
Yang-Hsien Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Investigation of metal/carbon-related materials for fuel cell applications by electronic structure calculations
Ki-jeong Kong et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2006)
Intermetallic growth kinetics for Sn-Ag, Sn-Cu, and Sn-Ag-Cu lead-free solders on Cu, Ni, and Fe-42Ni substrates
N. Dariavach et al.
JOURNAL OF ELECTRONIC MATERIALS (2006)
Effects of bismuth on growth of intermetallic compounds in Sn-Ag-CuPb-free solder joints
Li Guo-Yuan et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2006)
Effects of limited Cu supply on soldering reactions between SnAgCu and Ni
C. E. Ho et al.
JOURNAL OF ELECTRONIC MATERIALS (2006)
Effects of Co and Ni addition on reactive diffusion between Sn-3.5Ag solder and Cu during soldering and annealing
F Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Microstructure, solderability, and growth of intermetallic compounds of Sn-Ag-Cu-RE lead-free solder alloys
CMT Law et al.
JOURNAL OF ELECTRONIC MATERIALS (2006)
Effects of Cu contents in Sn-Cu solder on the composition and morphology of intermetallic compounds at a solder/Ni interface
DQ Yu et al.
JOURNAL OF MATERIALS RESEARCH (2005)
IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic NiBGA substrate
JW Yoon et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
Interfacial reactions between lead-free solders and common base materials
T Laurila et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Effect of indium addition in Sn-rich solder on the dissolution of Cu metallization
A Sharif et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
Effect of rare earth element addition on the microstructure of Sn-Ag-Cu solder joint
B Li et al.
JOURNAL OF ELECTRONIC MATERIALS (2005)
Properties of lead-free solder alloys with rare earth element additions
CML Wu et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2004)
Influence of Sb on IMC growth in Sn-Ag-Cu-SbPb-free solder joints in reflow process
BL Chen et al.
THIN SOLID FILMS (2004)
Effect of microelements addition on the interfacial reaction between Sn-Ag-Cu solders and the Cu substrate
CM Chuang et al.
JOURNAL OF ELECTRONIC MATERIALS (2003)
Development of Cu-Sn intermetallic compound at Pb-free solder/Cu joint interface
X Ma et al.
MATERIALS LETTERS (2003)
Mechanical properties of intermetallic compounds associated with Pb-free solder joints using nanoindentation
JP Lucas et al.
JOURNAL OF ELECTRONIC MATERIALS (2003)
Ag3Sn plate formation in the solidification of near ternary eutectic Sn-Ag-Cu alloys
DW Henderson et al.
JOURNAL OF MATERIALS RESEARCH (2002)
Microstructure and mechanical properties of new lead-free Sn-Cu-RE solder alloys
CML Wu et al.
JOURNAL OF ELECTRONIC MATERIALS (2002)
Effect of rare earth element additions on the microstructure and mechanical properties of tin-silver-bismuth solder
ZD Xia et al.
JOURNAL OF ELECTRONIC MATERIALS (2002)
Effect of Cu concentration on the reactions between Sn-Ag-Cu solders and Ni
CE Ho et al.
JOURNAL OF ELECTRONIC MATERIALS (2002)
Effect of La on the Cu-Sn intermetallic compound (IMC) growth and solder joint reliability
X Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2002)
Morphology, kinetics, and thermodynamics of solid-state aging of eutectic SnPb and Pb-free solders (Sn-3.5Ag, Sn-3.8Ag-0.7Cu and Sn-0.7Cu) on Cu
TY Lee et al.
JOURNAL OF MATERIALS RESEARCH (2002)
Strong effect of Cu concentration on the reaction between lead-free microelectronic solders and Ni
CE Ho et al.
CHEMISTRY OF MATERIALS (2002)
The growth of intermetallic compounds at Sn-Ag-Cu solder/Cu and Sn-Ag-Cu solder/Ni interfaces and the associated evolution of the solder microstructure
A Zribi et al.
JOURNAL OF ELECTRONIC MATERIALS (2001)
Tin-lead (SnPb) solder reaction in flip chip technology
KN Tu et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2001)
Effect of soldering and aging time on interfacial microstructure and growth of intermetallic compounds between Sn-3.5Ag solder alloy and Cu substrate
WK Choi et al.
JOURNAL OF ELECTRONIC MATERIALS (2000)
Interfacial morphology and shear deformation of flip chip solder joints
JW Jang et al.
JOURNAL OF MATERIALS RESEARCH (2000)