Clogging evaluation of open graded friction course pavements tested under rainfall and heavy vehicle simulators

In this study a new procedure is developed to obtain core samples from field sections to assess clogging mechanisms of open graded friction course (OGFC) pavements using X-ray computed tomography (CT) imaging. The approach compared X-ray computed tomography (CT) images taken before and after: (1) rainfall simulations without trafficking to investigate particle-related clogging and (2) full-scale accelerated pavement rutting tests (APT) to investigate deformation related clogging of OGFC layers. Rainfall simulations were performed with runoff water of known total suspended solids (TSS) and particle size distributions (PSDs). Full-scale accelerated rutting tests were performed under controlled temperature and loads. Both investigations were performed for three different OGFC pavements with different layer thicknesses and mix types. The clogging of rutting test sections were also evaluated by comparing the surface permeability measurements performed before and after APT testing. The results of X-ray CT image processing revealed a significant reduction in air-void content of core samples after APT rutting tests. The highest air-void reduction was concentrated at the bottom of the OGFC layers. Permeability measurements also showed a 40%-90% reduction in permeability after APT trafficking. X-ray CT image processing of core samples tested under simulated rainfall showed that air void content reduction is concentrated in the lower part (2-6 mm from the bottom) of the OGFC layers as a result of particle accumulation. Small changes in air void contents were observed in the upper part of the OGFC layers (10-15 mm) while these reductions in air void contents were not significant to cause surface overflow and hence it is expected that the tested OGFC pavements will have sufficient permeability to infiltrate water during most average storm events. (C) 2013 Elsevier Ltd. All rights reserved.