Biodiesel from activated sludge through in situ transesterification

BACKGROUND: The microbial biomass present in activated sludge contains lipidic compounds that can be used as biodiesel feedstock. In this study, the production of biodiesel from activated sludge from Tuscaloosa, AL was optimized based on the yield of fatty acid methyl esters (FAMEs). In situ transesterification was used with sulfuric acid as catalyst. A general factorial design of 4 x 6 x 5 for temperature, methanol to sludge ratio and catalyst concentration, respectively, was considered for optimization. RESULTS: Biodiesel yield can be adequately described by the quadratic response surface model with R-2 of 0.843 and statistically insignificant lack of fit (p = 0.152). Numerical optimization showed that an optimum biodiesel yield of 4.88% can be obtained at 55 degrees C, 25 methanol to sludge ratio and 4% volume sulfuric acid. The optimum experimental biodiesel yield was indeed obtained at that condition but with a value of 4.79 +/- 0.02%. The highest error was 2.30% which indicates good agreement between the model and the experimental data. CONCLUSIONS: Acid-catalyzed polymerization of unsaturated fatty acids or their esters at temperature above 60 degrees C significantly decreased biodiesel yield. The fatty acid profile of the biodiesel produced indicates that activated sludge may be used as biodiesel feedstock. (C) 2009 Society of Chemical Industry