Marine electrical resistivity tomography for shipwreck detection in very shallow water: a case study from Agropoli (Salerno, southern Italy)

A marine electric resistivity survey was carried out over a submerged beach along the Agropoli shore (Salerno, Italy) to detect buried objects of archaeological interest below the sandy seabed. We found a shipwreck, a military vessel that probably sunk during the Salerno landing operations of the allied forces in the Second World War. Resistivity data provide information on the vertical and horizontal extension of the shipwreck, which is characterized by very low calculated resistivity values (about 2-5 ohm m). Such values differ significantly from the sand and the bedrock values (5-40 ohm m). Although the presence of the shipwreck is clearly visible from geoelectric data, the joint application of electric, magnetic and multibeam bathymetric techniques reduces the ambiguities inherent in each method. As shown in the Electrical Resistivity Tomography (ERT) and confirmed by the Digital Elevation Model (obtained from the processing of bathymetric data), the shipwreck extends more than 30 m in NE SW direction and it is about 13 m wide. The global extension of the relic is consistent with the magnetic data, that are characterized by a magnetic anomaly with an amplitude of about 1800 nT and similar dimension, as inferred from the estimation of source boundaries obtained from the computation of the analytic signal. The results of our survey encourage the use of marine geoelectrical methods for the detection of buried archaeological targets, particularly in locations where the use of seismic prospecting is not effective (e.g. very shallow water with sandy sea-bottoms). The integration of different geophysical methods allows to better define the extension, depth and thickness of buried objects, suggesting that such an approach is the most effective for underwater archaeological investigations. (C) 2010 Elsevier Ltd. All rights reserved.