Epoxidized Natural Rubber/Epoxy Blends: Phase Morphology and Thermomechanical Properties

Epoxidized natural rubbers (ENRs) were prepared. ENRs with different concentrations of up to 20 wt % were used as modifiers for epoxy resin. The epoxy monomer was cured with nadic methyl anhydride as a hardener in the presence of N,N-dimethyl benzyl amine as an accelerator. The addition of ENR to an anhydride hardener/epoxy monomer mixture gave rise to the formation of a phase-separated structure consisting of rubber domains dispersed in the epoxy-rich phase. The particle size increased with increasing ENR content. The phase separation was investigated by scanning electron microscopy and dynamic mechanical analysis. The viscoelastic behavior of the liquid-rubber-modified epoxy resin was also evaluated with dynamic mechanical analysis. The storage moduli, loss moduli, and tan values were determined for the blends of the epoxy resin with ENR. The effect of the addition of rubber on the glass-transition temperature of the epoxy matrix was followed. The thermal stability of the ENR-modified epoxy resin was studied with thermogravimetric analysis. Parameters such as the onset of degradation, maximum degradation temperature, and final degradation were not affected by the addition of ENR. The mechanical properties of the liquid-natural-rubber-modified epoxy resin were measured in terms of the fracture toughness and impact strength. The maximum impact strength and fracture toughness were observed with 10 wt % ENR modified epoxy blends. Various toughening mechanisms responsible for the enhancement in toughness of the diglycidyl ether of the bisphenol A/ENR blends were investigated. (c) 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 39906.