Nebular spectra and abundance tomography of the Type Ia supernova SN 2011fe: a normal SN Ia with a stable Fe core

A series of optical and one near-infrared nebular spectra covering the first year of the Type Ia supernova SN 2011fe are presented and modelled. The density profile that proved best for the early optical/ultraviolet spectra, 'rho-11fe', was extended to lower velocities to include the regions that emit at nebular epochs. Model rho-11fe is intermediate between the fast deflagration model W7 and a low-energy delayed-detonation. Good fits to the nebular spectra are obtained if the innermost ejecta are dominated by neutron-rich, stable Fe-group species, which contribute to cooling but not to heating. The correct thermal balance can thus be reached for the strongest [Fe ii] and [Fe iii] lines to be reproduced with the observed ratio. The Ni-56 mass thus obtained is similar to 0.47 +/- A 0.05 M-aS (TM). The bulk of Ni-56 has an outermost velocity of similar to 8500 km s(-1). The mass of stable iron is similar to 0.23 +/- A 0.03 M-aS (TM). Stable Ni has low abundance, similar to 10(-2) M-aS (TM). This is sufficient to reproduce an observed emission line near 7400 angstrom. A sub-Chandrasekhar explosion model with mass 1.02 M-aS (TM) and no central stable Fe does not reproduce the observed line ratios. A mock model where neutron-rich Fe-group species are located above Ni-56 following recent suggestions is also shown to yield spectra that are less compatible with the observations. The densities and abundances in the inner layers obtained from the nebular analysis, combined with those of the outer layers previously obtained, are used to compute a synthetic bolometric light curve, which compares favourably with the light curve of SN 2011fe.