Related references
Note: Only part of the references are listed.MgO and ZnO as reinforcing fillers in cured polychloroprene rubber
Yotwadee Chokanandsombat et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Surfactant modified zinc borate synthesis and its effect on the properties of PET
Berk Baltaci et al.
POWDER TECHNOLOGY (2013)
Effect of surface modification with 3-aminopropyltriethyloxy silane on mechanical and crystallization performances of ZnO/poly(butylenesuccinate) composites
Wen-Guang Liu et al.
COMPOSITES PART B-ENGINEERING (2012)
Stretching-induced interfacial crystalline structures and relevant mechanical properties in melt-spun polypropylene/whisker composite fibers
Yao Gao et al.
POLYMER (2012)
Ultraviolet resistance and antimicrobial properties of ZnO-supported zeolite filled isotactic polypropylene composites
Juan Jiang et al.
POLYMER DEGRADATION AND STABILITY (2012)
Thermal, tensile and rheological properties of linear low density polyethylene (LLDPE) irradiated by gamma-ray in different atmospheres
H. F. R. Ferreto et al.
RADIATION PHYSICS AND CHEMISTRY (2012)
Realizing the enhancement of interfacial interaction in semicrystalline polymer/filler composites via interfacial crystallization
Nanying Ning et al.
PROGRESS IN POLYMER SCIENCE (2012)
ZINC OXIDE VERSUS MAGNESIUM OXIDE REVISITED. PART 1
Manuel Guzman et al.
RUBBER CHEMISTRY AND TECHNOLOGY (2012)
Synthesis and characterization of polyurethane/zinc borate nanocomposites
Xiaoyan Gao et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)
Effect of whiskers nucleation ability and shearing function on the interfacial crystal morphology of polyethylene (PE)/raw whiskers composites
Nanying Ning et al.
COMPOSITES PART B-ENGINEERING (2011)
Scale-up synthesis of zinc borate from the reaction of zinc oxide and boric acid in aqueous medium
Mert Kilinc et al.
JOURNAL OF CRYSTAL GROWTH (2010)
Synthesis of hydrophobic zinc borate nanoflakes and its effect on flame retardant properties of polyethylene
Shengli Li et al.
JOURNAL OF SOLID STATE CHEMISTRY (2010)
Synergistic effect of boron containing substances on flame retardancy and thermal stability of intumescent polypropylene composites
Mehmet Dogan et al.
POLYMER DEGRADATION AND STABILITY (2010)
The Use of Thermoplastic Elastomers as Polymer Processing Aids in Processing of Linear Low Density Polyethylene
M. Mueller et al.
POLYMER SCIENCE SERIES A (2010)
Characterization of styrene butadiene rubber/recycled acrylonitrile-butadiene rubber (SBR/NBRr) blends: The effects of epoxidized natural rubber (ENR-50) as a compatibilizer
N. Z. Noriman et al.
POLYMER TESTING (2010)
Superiority of Dielectric Properties of LDPE/MgO Nanocomposites over Microcomposites
Kazuyuki Ishimoto et al.
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2009)
Molecular design of nanometric zinc borate-containing polyimide as a route to flame retardant materials
Suleyman Koytepe et al.
MATERIALS RESEARCH BULLETIN (2009)
Thermoplastic Elastomer Composites of Palm Ash-Filled Ethylene Vinyl Acetate/Natural Rubber Blends: Effects of Palm Ash Loading and Size
N. N. Najib et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2009)
Space charge trapping in electrical potential well caused by permanent and induced dipoles for LDPE/MgO nanocomposite
Tatsuo Takada et al.
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2008)
Dielectric properties and crystalline morphology of low density polyethylene blended with metallocene catalyzed polyethylene
X. Wang et al.
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2008)
DC conduction and electrical breakdown of MgO/LDPE nanocomposite
Yoshinobu Murakami et al.
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2008)
Nonisothermal crystallization kinetics of ZnO nanorod filled polyamide 11 composites
Meng Wu et al.
MATERIALS CHEMISTRY AND PHYSICS (2008)
The effect of HVA-2 on properties of irradiated epoxidized natural rubber (ENR-50), ethylene vinyl acetate (EVA), and ENR-50/EVA blend
M. Zurina et al.
POLYMER TESTING (2008)
Preparation and characterization of polypropylene/waste tyre dust blends with addition of DCP and HVA-2 (PP/WTDP-HVA2)
M. Awang et al.
POLYMER TESTING (2008)
Irradiation crosslinking and halogen-free flame retardation of EVA using hydrotalcite and red phosphorus
CM Jiao et al.
RADIATION PHYSICS AND CHEMISTRY (2006)
Nonisothermal crystallisation, melting behavior and wide angle X-ray scattering investigations on linear low density polyethylene (LLDPE)/ethylene vinyl acetate (EVA) blends: effects of compatibilisation and dynamic crosslinking
KA Moly et al.
EUROPEAN POLYMER JOURNAL (2005)
Studies on the cure and mechanical properties of blends of natural rubber with dichlorocarbene modified styrene-butadiene rubber and chloroprene rubber
MT Ramesan et al.
REACTIVE & FUNCTIONAL POLYMERS (2005)
Thermoplastic elastomers derived from scrap rubber powder/LLDPE blend with LLDPE-graft-(epoxidized natural rubber) dual compatibilizer
BC Guo et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2004)
Thermogravimetric analysis, flammability and oil resistance properties in natural rubber and dichlorocarbene modified styrene butadiene rubber blends
MT Ramesan
REACTIVE & FUNCTIONAL POLYMERS (2004)
Halogen-free flame retardation and silane crosslinking of polyethylenes
ZZ Wang et al.
POLYMER TESTING (2003)
Mechanical and morphological properties of PP/NR/LLDPE ternary blend - effect of HVA-2
A Hassan et al.
POLYMER TESTING (2003)
The morphology and thermal properties of liquid natural rubber (LNR)-compatibilized 60/40 NR/LLDPE blends
HM Dahlan et al.
POLYMER TESTING (2002)
Effect of filler loading on tensile and tear properties of SMR L/ENR 25 and SMR L/SBR blends cured via a semi-efficient vulcanization system
BT Poh et al.
POLYMER TESTING (2002)
Effects of PE-g-DBM as a compatiblizer on mechanical properties and crystallization behaviors of magnesium hydroxide-based LLDPE blends
ZZ Wang et al.
POLYMER DEGRADATION AND STABILITY (2002)