On the critical failure mode transition depth for rock cutting

It has been established that, in rock cutting as well as in indentation, there exist two failure modes. In the case of rock cutting, when the depth of cut is shallow the rock fails in ductile mode, and as the depth of cut increases the failure shifts to brittle mode. The critical depth, at which the failure mode transition sharpens, is proportional to some material characteristic length. This study explored the means by which this critical transition depth could be obtained. Considering the depth of cut as a measure of size and treating rock cutting to be similar in geometry, this study first demonstrated that Bazant's simple size effect equation for quasibrittle material fit rock-cutting data very well. This led to a further exploration of a characteristic length measure that has been widely used in concrete fracture research. With the aid of finite element analysis and few test data points, the critical depth was expressed in terms of the rock characteristic length. Aided by empirical relationships, the critical depth was also shown to be a function of rock uniaxial compressive strength. (C) 2013 Elsevier Ltd. All rights reserved.