Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets: Application to sheet springback

The constitutive model for the unusual asymmetric hardening behavior of magnesium alloy sheet presented in a companion paper (Lee, M.G., Wagoner, R.H., Lee, J.K., Chung, K., Kim, H.Y., 2008. Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheet, Int. J. Plasticity 24(4), 545-582) was applied to the springback prediction in sheet metal forming. The implicit finite element program ABAQUS was utilized to implement the developed constitutive equations via user material subroutine. For the verification purpose, the springback of AZ31B magnesium alloy sheet was measured using the unconstrained cylindrical bending test of Numisheet (Numisheet '2002 Benchmark Problem, 2002. In: Yang, D.Y., Oh, S.I., Huh, H., Kim, Y.H. (Eds.), Proceedings of 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes, Jeju, Korea) and 2D draw bend test. With the specially designed draw bend test the direct restraining force and long drawn distance were attainable, thus the measurement of the springback could be made with improved accuracy comparable with conventional U channel draw bend test. Besides the developed constitutive models, other models based on isotropic constitutive equations and the Chaboche type kinematic hardening model were also considered. Comparisons were made between simulated results by the finite element analysis and corresponding experiments and the newly proposed model showed enhanced prediction capability, which was also supported by the simple bending analysis adopting asymmetric stress-strain response. (C) 2007 Elsevier Ltd. All rights reserved.