Impact of surface area of silica particles on dissolution rate and oral bioavailability of poorly water soluble drugs: A case study with aceclofenac

This study aims to evaluate the impact of surface area of silica particles on in vitro release of poorly soluble drug aceclofenac and their in vivo performances. Mesoporous silicas of different surface area and porosity were synthesized and characterized. Aceclofenac loaded silicas were prepared by solvent evaporation technique and characterized for surface area, pore size, DSC, FTIR and p-XRD. The dissolution efficiency (DE) of the mesoporous and nonporous silica was similar to 2 times more than that of plain drug and marketed tablets in acidic discriminating media. A significant enhancement of 189% and 164% in oral bioavailability (AUCO-8) was observed for optimized aceclofenac loaded mesoporous formulation (MS11172) and nonporous silica (NP), respectively, when compared to plain aceclofenac in male Wistar rats. However, no correlation could be established between the enhancements in their oral bioavailability and their corresponding surface area. The surface area of MS11/72 was 5 times more (similar to 1011 m(2)/g) when compared to NP (similar to 200 m(2)/g) and the enhancement in the oral bioavailability was only 1.15 times. This could be due to the limiting value of effective surface area of the drug available for in vitro dissolution beyond which, any further increase in surface area fails to improve the release rate or its bioavailability. (C) 2013 Elsevier B.V. All rights reserved.