Flotation behaviors of ilmenite, titanaugite, and forsterite using sodium oleate as the collector

The flotation behaviors of ilmenite, titanaugite, and forsterite using sodium oleate as the collector were investigated using microflotation experiments, zeta-potential measurements, Fourier transform infrared (FT-IR) analyses, X-ray photoelectron spectroscopy (XPS) analyses and the artificially mixed minerals flotation experiments. The results of the microflotation experiments indicate that ilmenite exhibits good floatability when pH >4.0. Titanaugite possesses a certain floatability at pH 4.0-6.0 and pH > 10.0, and forsterite possesses certain floatability at pH 5.0-7.0 and pH >9.0. The results of FT-IR and XPS analyses indicate that sodium oleate mainly interacts with Fe, resulting in ilmenite flotation; that the Ca and Mg on the titanaugite surface chemically reacted with sodium oleate, and that the Mg on the forsterite surface chemically reacted with sodium oleate under acidic condition. However, sodium oleate mainly reacted with the Ca and Mg on the titanaugite surface, whereas sodium oleate mainly reacted with the Mg on the ilmenite and forsterite surfaces under alkaline conditions. The results of the artificially mixed minerals flotation experiment demonstrate that the concentrate of TiO2 grade increases from 16.92% to 30.19% at pH 5.4, which represents the appropriate conditions for the flotation separation of ilmenite from titanaugite and forsterite under weak acidic conditions. (C) 2014 Elsevier Ltd. All rights reserved.