Journal
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS
Volume 20, Issue 2, Pages 214-220Publisher
SPRINGER
DOI: 10.1007/s12613-013-0715-6
Keywords
geopolymers; Portland cement; fly ash; compressive strength; porosity; elastic moduli
Categories
Funding
- Higher Education Research Promotion and National Research University Project of Thailand
- Thailand Research Fund (TRF) under the TRF Senior Research Scholar [RTA5480004]
- Royal Golden Jubilee Ph.D. Program [PHD/0340/2552]
Ask authors/readers for more resources
The effect of Portland cement (OPC) addition on the properties of high calcium fly ash geopolymer pastes was investigated in the paper. OPC partially replaced fly ash (FA) at the dosages of 0, 5%, 10%, and 15% by mass of binder. Sodium silicate (Na2SiO3) and sodium hydroxide (NaOH) solutions were used as the liquid portion in the mixture: NaOH 10 mol/L, Na2SiO3/NaOH with a mass ratio of 2.0, and alkaline liquid/binder (L/B) with a mass ratio of 0.6. The curing at 60A degrees C for 24 h was used to accelerate the geopolymerization. The setting time of all fresh pastes, porosity, and compressive strength of the pastes at the stages of 1, 7, 28, and 90 d were tested. The elastic modulus and strain capacity of the pastes at the stage of 7 d were determined. It is revealed that the use of OPC as an additive to replace part of FA results in the decreases in the setting time, porosity, and strain capacity of the paste specimens, while the compressive strength and elastic modulus seem to increase.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available