Influence of blasting on the properties of weak intercalation of a layered rock slope

A precondition for correctly analyzing the stability of a slope and designing its bracing structure is to study and determine the influence of excavation blasting on the properties of weak intercalation in the layered rock slope. On the basis of in-situ stratification-cracking blasting tests, the properties of weak intercalation were investigated using the LS-DYNA3D program. The displacement distribution and compactness of weak intercalation at different positions away from the charge center and their various laws are discussed. The critical displacement of stratification-cracking (0.1 min) was obtained, and an approximate expression of compactness were deduced. Furthermore, through the simulation of a layered rock blasting under the same geological conditions, the stratification-cracking effect of deep-hole blasting on the properties of weak intercalation was compared with that of short-hole blasting, and the influencing differences, in addition to their causes, were analyzed. The results indicated that the blasting cavity of weak intercalation in short-hole blasting with a radius of 40 min was nearly a circle, whose radius was about 28.7 cm; whereas in deep-hole blasting with a radius of 150 min, the shape of the blasting cavity was different from that in short-hole blasting, the radius of the cavity behind the charge (89.1 cm) was further smaller than those of the other three (138.7 cm), and there were sharp crinkles on the surface of weak intercalation. When the distance from the charge center (DCC) was less than 40 and 150 cm in short-hole and deep-hole blasting, respectively, the displacement of weak intercalation was reduced remarkably with the increase in DCC.