The structure, hydrogen storage, and electrochemical properties of Fe-doped C14-predominating AB2 metal hydride alloys

A series of Fe-substituting cobalt C14-predoninating AB(2) alloys with the general formula Ti12Zr21.5V10Cr7.5Mn8.1FexCo8-xNi32.2Sn0.3Al0.4 (X = 0-5) were studied for the impacts of Fe to structure, gaseous, and electrochemical hydrogen storage properties. All alloys exhibit hyper-stoichiometric C14 main phase due to the formation of A-rich non-Laves secondary phases and the loss of Zr and Ti in the melt. Lattice parameters together with the unit cell volume increases and then decreases with increasing Fe-content which indicates the existence of anti-site defects. The amount of TiNi secondary phase increases with the increase of Fe-content up to 4% and shows a detrimental effect to the high-rate dischargeability of the alloys. Most of the gaseous storage characteristics remain unchanged with the addition of Fe. In the electrochemical properties, Fe-addition in the AB(2) alloys facilitates activation, increases the total electrochemical capacity and effective surface reaction area, decreases the half-cell high-rate dischargeability and bulk hydrogen diffusion, and deteriorates both -10 and -40 degrees C low-temperature performance. Fe-substituting Co in AB(2) alloys as negative electrode of nickel metal hydride battery can reduce the raw material cost with the trade-off being mainly in the low-temperature performance. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.