Biodiesel Yield Assessment in Continuous-Flow Reactors Using Batch Reactor Conditions

Fatty acid methyl esters derived from renewable sources such as vegetable oils has gained importance nowadays as an alternative fuel for diesel engines. The present study is aimed to produce biodiesel from non-edible oil (Karanja oil of Indian origin) both in batch and continuous reactors. The purpose of the study is the comparison of Karanja biodiesel production with different reactor types under variable reaction characteristics. Therefore, two types of continuous reactors were used: helical tube reactor and reactive distillation (RD) column. Experiments were carried out to obtain suitable operating parameters in batch- and continuous-flow reactors. For batch reactor, suitable operating conditions obtained are: 7:1 methanol-to-oil molar ratio, 0.8% (by weight of oil) catalyst (KOH), 65 degrees C reaction temperature, and 1-h reaction time, at which the maximum yield obtained is 96%. In continuous helical tube reactor, maximum yield of 92.6% was obtained at 6.6 mL/min of flow rate at the same operating conditions of batch reactor. In continuous RD column, maximum yield of biodiesel 96.6% was obtained at the same operating conditions except methanol-to-oil molar ratio (5:1) because of recycling of methanol into the column. The residence times in the helical tube reactor and RD column were 4 and 8 min, respectively, as compared to 1 h in the batch reactor for almost the same yield.