On the mechanism of squat formation on train rails - Part I: Origination

A phenomenological investigation of squat defects on rail grade R260Mn is performed. The surfacebreaking crack pattern, which is either linear or branched (V-shaped), shows a typical position and orientation in the running band. Particular characteristics are asymmetry of this pattern, with the presence of a leading and a trailing branch, and crack reflection or deviation at the running band border. Bending tests reveal a 3D internal crack pattern, with a pair of crack planes or 'wings' enclosing a wedge at the surface. Microstructural analysis of the rail upper layer shows metallurgical principles of crack initiation: delamination and transverse fracture of white etching material at the surface. This analysis moreover reveals a 3D anisotropic texture of the upper layer under combined bi-directional tangential surface stresses. Mechanical interpretation of the crack morphology shows that the leading or single branch of the surface-breaking crack pattern is a shear-induced fatigue crack, following the anisotropic microstructure when growing into the rail. The trailing crack of a branched squat is explained as the result of a subsequent transverse, wedge-shaped brittle failure mechanism of the surface layer of the rail, developing within the actual elliptical Hertzian contact patch - or the envelope of potential contact ellipses at the leading crack position. It is driven by the transverse shear loading towards the rail gauge face. (C) 2012 Elsevier Ltd. All rights reserved.