Related references
Note: Only part of the references are listed.Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
A. Shokrani et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Laser-assisted microgrinding of ceramics
M. Kumar et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Thermal effects in laser assisted jet electrochemical machining
A. K. M. De Silva et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Abrasive electrochemical multi-wire slicing of solar silicon ingots into wafers
W. Wang et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Precision machining of small holes by the hybrid process of electrochemical removal and grinding
D. Zhu et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
E. Yasa et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Metastable austenitic stainless steel tool for magnetic abrasive finishing
H. Yamaguchi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Laser assisted turning of Titanium Metal Matrix Composite
R. Bejjani et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Investigation of a combined micro-forming and punching process for the realization of tight geometrical tolerances of conically formed hole patterns
R. Kolleck et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Weld bead modeling and process optimization in Hybrid Layered Manufacturing
S. Suryakumar et al.
COMPUTER-AIDED DESIGN (2011)
Computer-aided process planning - A critical review of recent developments and future trends
Xun Xu et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2011)
Ramp-up of hybrid manufacturing technologies
B. Nau et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2011)
Integrated laser cell for combined laser cladding and milling
Steffen Nowotny et al.
ASSEMBLY AUTOMATION (2010)
Sequential laser and mechanical micro-drilling of Ni superalloy for aerospace application
M. M. Okasha et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Magnetic field-assisted finishing for micropore X-ray focusing mirrors fabricated by deep reactive ion etching
H. Yamaguchi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Analysis of residual stress on AH32 butt joint by hybrid CO2 laser-GMA welding
Hee Seon Bang et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
New systematic and time-saving procedure to design cup grinding wheels for the application of ultrasonic-assisted grinding
Christian Brecher et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Laser-assisted shearing: new process developments for the sheet metal industry
Christian Brecher et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy
S. Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Advances in hybrid laser joining
Jens Holtkamp et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Fracture mechanics-based analysis for hybrid laser/waterjet (LWJ) machining of yttria-partially stabilized zirconia (Y-PSZ)
Dinesh Kalyanasundaram et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Laser-assisted machining of hardened steel parts with surface integrity analysis
Hongtao Ding et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Machinability improvement of titanium alloy (Ti-6Al-4V) via LAM and hybrid machining
Chinmaya R. Dandekar et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Thermally enhanced machining of hard-to-machine materials-A review
S. Sun et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Development, Modeling, and Experimental Investigation of Low Frequency Workpiece Vibration-Assisted Micro-EDM of Tungsten Carbide
M. P. Jahan et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2010)
Capability of high pressure cooling in the turning of surface hardened piston rods
D. Kramar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
The technology of Incremental Sheet Forming-A brief review of the history
W. C. Emmens et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Hybrid micromachining using a nanosecond pulsed laser and micro EDM
Sanha Kim et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2010)
A methodology for the determination of foamed polymer contraction rates as a result of cryogenic CNC machining
V. G. Dhokia et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2010)
Low cost integration of additive and subtractive processes for hybrid layered manufacturing
K. P. Karunakaran et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2010)
Manufacturing complexity evaluation at the design stage for both machining and layered manufacturing
O. Kerbrat et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2010)
Investigation of amorphous and crystalline Ni alloys response to machining with micro-second and pico-second lasers
I. Quintana et al.
APPLIED SURFACE SCIENCE (2009)
Electrochemical superabrasive machining of a nickel-based aeroengine alloy using mounted grinding points
D. T. Curtis et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Chemical and mechanical balance in polishing of electronic materials for defect-free surfaces
H. S. Lee et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Investigation into a new hybrid forming process: Incremental sheet forming combined with stretch forming
B. Taleb Araghi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Laser assisted micro-milling of hard-to-machine materials
S. Melkote et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
High aspect ratio micro-hole drilling aided with ultrasonic vibration and planetary movement of electrode by micro-EDM
Z. Y. Yu et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Ultraprecision surface finishing of nano-ZrO2 ceramics using two-dimensional ultrasonic assisted grinding
Yan Yanyan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Retrofitment of a CNC machine for hybrid layered manufacturing
K. P. Karunakaran et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Some studies on high-pressure cooling in turning of Ti-6Al-4V
A. K. Nandy et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Analysis of ultrasonic-assisted drilling of Ti6Al4V
J. Pujana et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
High efficiency slicing of low resistance silicon ingot by wire electrolytic-spark hybrid machining
W. Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Investigation on microstructure, surface properties and anti-wear performance of HVOF sprayed WC-CrC-Ni coatings modified by laser heat treatment
Shi-Hong Zhang et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2009)
Investigation of a novel hybrid process of laser drilling assisted with jet electrochemical machining
Hua Zhang et al.
OPTICS AND LASERS IN ENGINEERING (2009)
Manufacturing methodology for personalised symptom-specific sports insoles
P. Crabtree et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2009)
Shape deposition manufacturing of biologically inspired hierarchical microstructures
M. Lanzetta et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Assessment of abrasion-assisted material removal in wire EDM
I. Menzies et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Ultrasonic deep hole drilling in electrolytic copper ECu 57
U. Heisel et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Improved SPIF performance through dynamic local heating
J. R. Duflou et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
A review of cryogenic cooling in machining processes
Yakup Yildiz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Influence of ultrasonic vibrations on dry grinding of soft steel
Taghi Tawakoli et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Design and validation of a hybrid laser/water-jet machining system for brittle materials
Dinesh Kalyanasundaram et al.
JOURNAL OF LASER APPLICATIONS (2008)
Novel laser/water-jet hybrid manufacturing process for cutting ceramics
Raathai Molian et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Surface roughness prediction model for CNC machining of polypropylene
V. G. Dhokia et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
Development of multi-axis numerical control program for mill-turn machine
Chen-Hua She et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
Geometric planning and analysis for hybrid re-configurable molding and machining process
Aditya Kelkar et al.
RAPID PROTOTYPING JOURNAL (2008)
A study on process parameters of ultrasonic assisted micro EDM based on Taguchi method
Murali M. Sundaram et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2008)
Piezoelectric actuator design for ultrasonically assisted deep hole drilling
C. Potthast et al.
JOURNAL OF ELECTROCERAMICS (2008)
Grinding wheel effect in the grind-hardening process
K. Salonitis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Trepanning of Al2O3 by electro-chemical discharge machining (ECDM) process using abrasive electrode with pulsed DC supply
Sanjay K. Chak et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Study on the edge isolation of industrial silicon solar cells with waterjet-guided laser
Daniel Kray et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2007)
Water-assisted laser thermal shock machining of alumina
Christopher Barnes et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Feasibility study of the ultrasonic vibration assisted drilling of Inconel superalloy
Y. S. Liao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Prediction of clad angle in laser cladding by powder using response surface methodology and scatter search
Godfrey C. Onwubolu et al.
OPTICS AND LASER TECHNOLOGY (2007)
Shape and dimensional accuracy in Single Point Incremental Forming: State of the art and future trends
F. Micari et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Statistical analysis of MIG-laser CO2 hybrid welding of Al-Mg alloy
G. Casalino
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
The influence of arc transfer mode in hybrid laser-mig welding
G. Campana et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Optimisation of tool life and productivity when end milling Inconel 718TM
H. R. Krain et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Characterization of a hybrid laser-assisted mechanical micromachining (LAMM) process for a difficult-to-machine material
Ramesh Singh et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Ultrasonic-assisted drilling of Inconel 738-LC
B. Azarhoushang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Modeling of ultra-precision ELID grinding
K. Fathima et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2007)
A graph-based methodology for hybrid rapid design
M. Rivette et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2007)
Rapid manufactured textiles
G. A. Bingham et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2007)
An approach to modelling the forming process of sheet metal-polymer composites
P. F. Bariani et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Cooling in grind-hardening operations
Konstantinos Salonitis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Applications of a hybrid manufacturing process for fabrication of metallic structures
Frank Liou et al.
RAPID PROTOTYPING JOURNAL (2007)
Deformation machining - A new hybrid process
S. Smith et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Laser assisted incremental forming: Formability and accuracy improvement
J. R. Duflou et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Grinding-hardening with liquid nitrogen: Mechanisms and technology
T. Nguyen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Laser-assisted machining of an austenitic stainless steel: P550
M. C. Anderson et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
High-power diode laser assisted hard turning of AISI D2 tool steel
P. Dumitrescu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Laser-assisted machining of Inconel 718 with an economic analysis
Mark Anderson et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Study of rapid and direct thick coating deposition by hybrid plasma-laser manufacturing
Hai-ou Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2006)
High-pressure cooling of face-grooving operations in Ti6Al4V
K. Sorby et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
An analytical model for estimating deformation in laser forming
Hong Shen et al.
COMPUTATIONAL MATERIALS SCIENCE (2006)
Overlap welding of magnesium AZ31B sheets using laser-arc hybrid process
Gang Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Research of rapid and direct thick coatings deposition by hybrid plasma-laser
Ying-ping Qian et al.
APPLIED SURFACE SCIENCE (2006)
Thermal modeling for laser-assisted machining of silicon nitride ceramics with complex features
Yinggang Tian et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2006)
Ground surface improvement of the austenitic stainless steel AISI 304 using cryogenic cooling
N Ben Fredj et al.
SURFACE & COATINGS TECHNOLOGY (2006)
A robust compliant grasper via shape deposition manufacturing
AM Dollar et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2006)
Hybrid adaptive layer manufacturing: An Intelligent art of direct metal rapid tooling process
S Akula et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2006)
Ultrasonic assisted turning of an aluminium-based metal matrix composite reinforced with SiC particles
ZW Zhong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Experimental investigations into rapid prototyping of composites by novel hybrid deposition process
YA Song et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
High speed milling, electro discharge machining and direct metal laser sintering: A method to optimize these processes in hybrid rapid tooling
P Mognol et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Freeform fabrication of ionomeric polymer-metal composite actuators
Evan Malone et al.
RAPID PROTOTYPING JOURNAL (2006)
Abrasive polishing assisted nickel electroforming process
D. Zhu et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)
Sequential laser and EDM micro-drilling for next generation fuel injection nozzle manufacture
Lin Li et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)
Rotary ultrasonic machining of ceramic matrix composites: feasibility study and designed experiments
ZC Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Evaluation of the performance of CBN tools when turning Ti-6Al-4V alloy with high pressure coolant supplies
EO Ezugwu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Heat transfer model of semi-transparent ceramics undergoing laser-assisted machining
FE Pfefferkorn et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)
Grit blast assisted laser milling/grooving of metallic alloys
L Li et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2005)
Geometric algorithms for rapidly reconfigurable mold manufacturing of free-form objects
A Kelkar et al.
COMPUTER-AIDED DESIGN (2005)
Plasma assisted milling of heat-resistant superalloys
LNL de Lacalle et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2004)
Adaptive slicing for a multi-axis laser aided manufacturing process
J Zhang et al.
JOURNAL OF MECHANICAL DESIGN (2004)
End milling of elastomers - Fixture design and tool effectiveness for material removal
AJ Shih et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2004)
Laser-assisted machining of magnesia-partially-stabilized zirconia
FE Pfefferkorn et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2004)
Hybrid layered manufacturing: direct rapid metal tool-making process
KP Karunakaran et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2004)
Turning assisted with deep cold rolling - a cost efficient hybrid process for workpiece surface quality enhancement
DA Axinte et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2004)
Effect of heat sink on microstructure of three-dimensional parts built by welding-based deposition
Z Jandric et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Freeform fabrication of zinc-air batteries and electromechanical assemblies
E Malone et al.
RAPID PROTOTYPING JOURNAL (2004)
Chemical assisted laser machining for the minimisation of recast and heat affected zone
L Li et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Finite element simulation of deep drawing of tailored heat treated blanks
M Geiger et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Finite element simulation of deep drawing of tailored heat treated blanks
M Geiger et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Modelling and experimental investigation of laser assisted jet electrochemical machining
AKM De Silva et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Hybrid machining of Inconel 718
ZY Wang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Lead-time reduction through flexible routing: application to Shape Deposition Manufacturing
JM Pinilla et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2003)
Ultrasonic vibration assisted electro-discharge machining of microholes in Nitinol
H Huang et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2003)
Effect of chilled air on machining performance in end milling
M Rahman et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2003)
Modeling of waterjet guided laser grooving of silicon
CF Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Fabrication of 3D metal microstructures using a hybrid process of micro-EDM and laser assembly
CL Kuo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2003)
Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives
GN Levy et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)
Turning of titanium alloy with TiB2-coated carbides under cryogenic cooling
KA Venugopal et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2003)
Laser-assisted machining of reaction sintered mullite ceramics
PA Rebro et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2002)
Analysis of the rotary ultrasonic machining mechanism
G Ya et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Improvement of form accuracy in hybrid machining of microstructures
HS Lim et al.
JOURNAL OF ELECTRONIC MATERIALS (2002)
Hybrid rapid prototyping system using machining and deposition
JH Hur et al.
COMPUTER-AIDED DESIGN (2002)
A fundamental study on the mechanism of electrolytic in-process dressing (ELID) grinding
HS Lim et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
A combined 3D linear and circular interpolation technique for multi-axis CNC machining
H Liang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2002)
Ink-jet printed nanoparticle microelectromechanical systems
SB Fuller et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2002)
Layer-based machining: recent development and support structure design
ZY Yang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2002)
New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V
SY Hong et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
Experimental investigation of thermo-mechanical characteristics in laser-assisted machining of silicon nitride ceramics
S Lei et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2001)
Micro-temperature manipulation in cryogenic machining of low carbon steel
SY Hong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Mathematical modeling of laser-assisted deep drawing
D Schuöcker
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Development of a direct metal freeform fabrication technique using CO2 laser welding and milling technology
DS Choi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Plasma enhanced machining of Inconel 718: modeling of workpiece temperature with plasma heating and experimental results
CE Leshock et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
The development of a layer based machining system
YH Chen et al.
COMPUTER-AIDED DESIGN (2001)
Mold fabrication and modification using hybrid processes of selective laser cladding and milling
JY Jeng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Selected problems of abrasive hybrid machining
J Kozak et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Mechanical alloying during cryomilling of a 5000 Al alloy/AlN powder:: the effect of contamination
C Goujon et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2001)
Contoured edge slice generation in rapid prototyping via 5-axis machining
JB Taylor et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2001)
Hybrid high speed machining (HSM): System design and experimental results for grinding/HSM and EDM/HSM
DK Aspinwall et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2001)
ECDM (Electro Chemical Discharge Machining), a new method for trueing and dressing of metal-bonded diamond grinding tools
M Schopf et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2001)
Experimental evaluation of the laser assisted machining of silicon nitride ceramics
JC Rozzi et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2000)
Cryogenic machining of hard-to-cut materials
ZY Wang et al.
WEAR (2000)
Share Paper
