Related references
Note: Only part of the references are listed.A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Thomas Billiet et al.
BIOMATERIALS (2012)
Novel methods to fabricate macroporous 3D carbon scaffolds and ordered surface mesopores on carbon filaments
Xuesong Lu et al.
JOURNAL OF POROUS MATERIALS (2012)
Pneumatic dispensing of nano- to picoliter droplets of liquid metal with the StarJet method for rapid prototyping of metal microstructures
A. Tropmann et al.
MICROFLUIDICS AND NANOFLUIDICS (2012)
Robocasting chitosan/nanobioactive glass dual-pore structured scaffolds for bone engineering
Biligzaya Dorj et al.
MATERIALS LETTERS (2012)
The PAM2 system: a multilevel approach for fabrication of complex three-dimensional microstructures
Annalisa Tirella et al.
RAPID PROTOTYPING JOURNAL (2012)
Additive manufacturing of tissues and organs
Ferry P. W. Melchels et al.
PROGRESS IN POLYMER SCIENCE (2012)
Review: Developments in micro/nanoscale fabrication by focused ion beams
Chung-Soo Kim et al.
VACUUM (2012)
Direct-Write Assembly of 3D Silk/Hydroxyapatite Scaffolds for Bone Co-Cultures
Lin Sun et al.
ADVANCED HEALTHCARE MATERIALS (2012)
3D Microperiodic Hydrogel Scaffolds for Robust Neuronal Cultures
Jennifer N. Hanson Shepherd et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Two-Component Polymer Scaffolds for Controlled Three-Dimensional Cell Culture
Franziska Klein et al.
ADVANCED MATERIALS (2011)
Selective ablation-assisted two-photon stereolithography for effective nano- and microfabrication
Tae Woo Lim et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)
Waveguides in three-dimensional photonic-bandgap materials by direct laser writing and silicon double inversion
I. Staude et al.
OPTICS LETTERS (2011)
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
W. Schuurman et al.
BIOFABRICATION (2011)
Additive manufacturing based on optimized mask video projection for improved accuracy and resolution
Chi Zhou et al.
Journal of Manufacturing Processes (2011)
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Karina Arcaute et al.
ACTA BIOMATERIALIA (2010)
Three-Dimensional Nanostructures for Photonics
Georg von Freymann et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
3D Bi-chiral Photonic Crystals: Three-Dimensional Bi-Chiral Photonic Crystals (Adv. Mater. 46/2009)
Michael Thiel et al.
ADVANCED MATERIALS (2010)
Rhombicuboctahedral Three-Dimensional Photonic Quasicrystals
Alexandra Ledermann et al.
ADVANCED MATERIALS (2010)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Dominant Factors of Metal Jet Breakup in Micro Droplet Deposition Manufacturing Technique
Qi Lehua et al.
CHINESE JOURNAL OF AERONAUTICS (2010)
Research on accurate droplet generation for micro-droplet deposition manufacture
Xiao-Shan Jiang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Cross-section segmentation for improving the shape accuracy of microstructure array in projection microstereolithography
In Baek Park et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Micro-manufacturing: research, technology outcomes and development issues
Yi Qin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Some recent advances in multi-material micro- and nano-manufacturing
E. B. Brousseau et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Three-dimensional Microstructure Using Partitioned Cross-sections in Projection Microstereolithography
Young-Myoung Ha et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2010)
Mechanical strength of extrusion freeformed calcium phosphate filaments
H. Y. Yang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2010)
Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication
Seung Hwan Ko et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2010)
Solvent-based paste extrusion solid freeforming
Xuesong Lu et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)
Designable 3D nanofabrication by femtosecond laser direct writing
Yong-Lai Zhang et al.
NANO TODAY (2010)
Microscale metal additive manufacturing of multi-component medical devices
Adam Cohen et al.
RAPID PROTOTYPING JOURNAL (2010)
Biocompatible Silk Printed Optical Waveguides
Sara T. Parker et al.
ADVANCED MATERIALS (2009)
Direct-Write Assembly of 3D Hydrogel Scaffolds for Guided Cell Growth
Robert A. Barry et al.
ADVANCED MATERIALS (2009)
Laser direct writing of combinatorial libraries of idealized cellular constructs: Biomedical applications
Nathan R. Schiele et al.
APPLIED SURFACE SCIENCE (2009)
The effect of photopolymerization on stem cells embedded in hydrogels
Natalja E. Fedorovich et al.
BIOMATERIALS (2009)
Evaluation of chondrocyte growth in the highly porous scaffolds made by fused deposition manufacturing (FDM) filled with type II collagen
Hung-Jen Yen et al.
BIOMEDICAL MICRODEVICES (2009)
3D printing of β-tricalcium phosphate ceramics
E. Vorndran et al.
DENTAL MATERIALS (2009)
Direct Inkjet Printing of dental Prostheses Made of Zirconia
J. Ebert et al.
JOURNAL OF DENTAL RESEARCH (2009)
Fine lattice structures fabricated by extrusion freeforming: Process variables
Xuesong Lu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification
Phung Xuan Lan et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2009)
Gelatin-Based Photopolymers for Bone Replacement Materials
Monika Schuster et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2009)
Vinyl Esters: Low Cytotoxicity Monomers for the Fabrication of Biocompatible 3D Scaffolds by Lithography Based Additive Manufacturing
Christian Heller et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2009)
Fabrication of Millimeter-Wave Electromagnetic Bandgap Crystals Using Microwave Dielectric Powders
Xuesong Lu et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)
Ink-jet printing of ceramic micro-pillar arrays
M. Lejeune et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Extrusion freeforming of millimeter wave electromagnetic bandgap (EBG) structures
Xuesong Lu et al.
RAPID PROTOTYPING JOURNAL (2009)
Solid Freeforming and Combinatorial Research
Julian R G Evans et al.
TSINGHUA SCIENCE AND TECHNOLOGY (2009)
Metal filled resin for stereolithography metal part
P. J. Bartolo et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Direct writing technology-Advances and developments
K. K. B. Hon et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Droplet generation from pulsed micro-jets
Ri Li et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2008)
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Pedro Miranda et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)
Dissolution characteristics of extrusion freeformed hydroxyapatite-tricalcium phosphate scaffolds
H. Y. Yang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2008)
Direct inkjet printing of Si3N4:: Characterization of ink, green bodies and microstructure
B. Cappi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)
Sintering behaviour of calcium phosphate filaments for use as hard tissue scaffolds
H. Y. Yang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)
Rapid prototyping of ceramic lattices for hard tissue scaffolds
Shoufeng Yang et al.
MATERIALS & DESIGN (2008)
3DP process for fine mesh structure printing
Kathy Lu et al.
POWDER TECHNOLOGY (2008)
Advances in 3D nano/microfabrication using two-photon initiated polymerization
Kwang-Sup Lee et al.
PROGRESS IN POLYMER SCIENCE (2008)
Multi-directional micro-switching valve chip with rotary mechanism
Tadahiro Hasegawa et al.
SENSORS AND ACTUATORS A-PHYSICAL (2008)
Laser micro sintering: A new method to generate metal and ceramic parts of high resolution with sub-micrometer powder
H. Exner et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2008)
In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing
Joshua L. Simon et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Sol-gel inks for direct-write assembly of functional oxides
Eric B. Duoss et al.
ADVANCED MATERIALS (2007)
Three-dimensional cell growth on structures fabricated from ORMOCER® by two-photon polymerization technique
Sabrina Schlie et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2007)
Metering and dispensing of powder; the quest for new solid freeforming techniques
S. Yang et al.
POWDER TECHNOLOGY (2007)
All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles
Seung H. Ko et al.
NANOTECHNOLOGY (2007)
Fabrication and properties of metalo-dielectric photonic crystal structures for infrared spectral region
Vygantas Mizeikis et al.
OPTICS EXPRESS (2007)
Dose uniformity of fine powders in ultrasonic microfeeding
Xuesong Lu et al.
POWDER TECHNOLOGY (2007)
Focused-ion-beam deposition for 3-D nanostructure fabrication
Shinji Matsui
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2007)
Directive millimetre-wave antenna based on freeformed woodpile EBG structure
Y. Lee et al.
ELECTRONICS LETTERS (2007)
Three-dimensional printing of shape memory alloys
E. Carreno-Morelli et al.
PROGRESS IN POWDER METALLURGY, PTS 1 AND 2 (2007)
Microfabrication for tissue engineering: rethinking the cells-on-a scaffold approach
Giovanni Vozzi et al.
JOURNAL OF MATERIALS CHEMISTRY (2007)
Bioprinting living structures
Vladimir Mironov et al.
JOURNAL OF MATERIALS CHEMISTRY (2007)
Rapid prototyping of ceramic millimeterwave metamaterials: Simulations and experiments
Yoonjae Lee et al.
MICROWAVE AND OPTICAL TECHNOLOGY LETTERS (2007)
Principles of laser micro sintering
P. Regenfuss et al.
RAPID PROTOTYPING JOURNAL (2007)
Elastomeric carbon nanotube circuits for local strain sensing
Hareem Maune et al.
APPLIED PHYSICS LETTERS (2006)
Fine ceramic lattices prepared by extrusion freeforming
Hongyi Yang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2006)
A systematic approach to process selection in MEMS
David J. Quinn et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2006)
Micro-rapid-prototyping via multi-layered photo-lithography
S. C. H. Thian et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Direct synthesis and inkjetting of silver nanocrystals toward printed electronics
Kwi Jong Lee et al.
NANOTECHNOLOGY (2006)
Laser-fabricated dielectric optical components for surface plasmon polaritons
C Reinhardt et al.
OPTICS LETTERS (2006)
Two photon induced polymerization of organic-inorganic hybrid biomaterials for microstructured medical devices
A Doraiswamy et al.
ACTA BIOMATERIALIA (2006)
Freeform fabrication of aluminum parts by direct deposition of molten aluminum
WB Cao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Development of micro-stereolithography technology using metal powder
Jin Woo Lee et al.
MICROELECTRONIC ENGINEERING (2006)
Cell wall cutting tool and nano-net fabrication by FIB-CVD for subcellular operations and analysis
Reo Kometani et al.
MICROELECTRONIC ENGINEERING (2006)
Three-dimensional rotor fabrication by focused-ion-beam chemical-vapor-deposition
Jun-ya Igaki et al.
MICROELECTRONIC ENGINEERING (2006)
3D-2D-3D photonic crystal heterostructures fabricated by direct laser writing
M Deubel et al.
OPTICS LETTERS (2006)
Characterization of tissue-engineered scaffolds microfabricated with PAM
M Mariani et al.
TISSUE ENGINEERING (2006)
Selective functionalization of 3-D polymer microstructures
RA Farrer et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2006)
Three-dimensional fabrication of metallic nanostructures over large areas by two-photon polymerization
F Formanek et al.
OPTICS EXPRESS (2006)
Micro lens fabrication by means of femtosecond two photon photopolymerization
R Guo et al.
OPTICS EXPRESS (2006)
Novel stereolithography system for small size objects
GS Xu et al.
RAPID PROTOTYPING JOURNAL (2006)
Laser-direct-write creation of three-dimensional OREST microcages for contact-free trapping, handling and transfer of small polarizable neutral objects in solution
M Stuke et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2005)
Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds
S Michna et al.
BIOMATERIALS (2005)
Microfabrication of three-dimensional bioelectronic architectures
RT Hill et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)
Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering
H Seitz et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Log-pile photonic crystal fabricated by two-photon photopolymerization
R Guo et al.
JOURNAL OF OPTICS A-PURE AND APPLIED OPTICS (2005)
Progress toward development of all-printed RFID tags:: Materials, processes, and devices
V Subramanian et al.
PROCEEDINGS OF THE IEEE (2005)
Projection micro-stereolithography using digital micro-mirror dynamic mask
C Sun et al.
SENSORS AND ACTUATORS A-PHYSICAL (2005)
One-step waveguide and optical circuit writing in photopolymerizable materials processed by two-photon absorption
S Klein et al.
APPLIED PHYSICS LETTERS (2005)
Three-dimensional spiral-architecture photonic crystals obtained by direct laser writing
KK Seet et al.
ADVANCED MATERIALS (2005)
Effect of oxidation on the breakup and monosized droplet generation of the molten metal jet
WH Lai et al.
ATOMIZATION AND SPRAYS (2005)
Industrial freeform generation of microtools by laser micro sintering
P Regenfuss et al.
RAPID PROTOTYPING JOURNAL (2005)
Multi-nozzle deposition for construction of 3D biopolymer tissue scaffolds
S Khalil et al.
RAPID PROTOTYPING JOURNAL (2005)
3D fine scale ceramic components formed by ink-jet prototyping process
R Noguera et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)
Performance of nanomanipulator fabricated on glass capillary by focused-ion-beam chemical vapor deposition
R Kometani et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2005)
A dry powder jet printer for dispensing and combinatorial research
SF Yang et al.
POWDER TECHNOLOGY (2004)
Microfabrication of ceramic components by microstereolithography
A Bertsch et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique
TBF Woodfield et al.
BIOMATERIALS (2004)
Complex-shaped three-dimensional microstructures and photonic crystals generated in a polysiloxane polymer by two-photon microstereolithography
M Straub et al.
OPTICAL MATERIALS (2004)
Direct laser writing of three-dimensional photonic-crystal templates for telecommunications
M Deubel et al.
NATURE MATERIALS (2004)
Combination of Yb:YAG-disc laser and roll-based powder deposition for the micro-laser sintering
H Haferkamp et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Microfabricated fractal branching networks
G Vozzi et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2004)
Nanomanipulator and actuator fabrication on glass capillary by focused-ion-beam-chemical vapor deposition
R Kometani et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2004)
Biological laser printing: A novel technique for creating heterogeneous 3-dimensional cell patterns
JA Barron et al.
BIOMEDICAL MICRODEVICES (2004)
Precision extruding deposition and characterization of cellular poly-epsilon-caprolactone tissue scaffolds
F Wang et al.
RAPID PROTOTYPING JOURNAL (2004)
Fabrication and moulding of cellular materials by rapid prototyping
J Stampfl et al.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2004)
A barrier embedded Kenics micromixer
DS Kim et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
Inkjet printing of highly loaded particulate suspensions
B Derby et al.
MRS BULLETIN (2003)
Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
SJ Kalita et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2003)
Photofabrication of wood-pile three-dimensional photonic crystals using four-beam laser interference
S Shoji et al.
APPLIED PHYSICS LETTERS (2003)
Multiple higher-order stop gaps in infrared polymer photonic crystals
M Straub et al.
PHYSICAL REVIEW LETTERS (2003)
Three-dimensional ceramic microcomponents made using microstereolithography
C Provin et al.
ADVANCED MATERIALS (2003)
Stereolithography on silicon for microfluidics and microsensor packaging
LA Tse et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2003)
Oxygen diffusion in ceramic suspensions for stereolithography
O Dufaud et al.
CHEMICAL ENGINEERING JOURNAL (2003)
Extrusion freeforming of ceramics through fine nozzles
I Grida et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2003)
Chemically amplified positive resists for two-photon three-dimensional microfabrication
TY Yu et al.
ADVANCED MATERIALS (2003)
Submicron manipulation tools driven by light in a liquid
S Maruo et al.
APPLIED PHYSICS LETTERS (2003)
Improved surface finish in 3D printing using bimodal powder distribution
M Lanzetta et al.
RAPID PROTOTYPING JOURNAL (2003)
Micro engineering
L Alting et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)
Numerical analysis of a mask type stereolithography process using a dynamic finite-element method
YM Huang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2003)
Three-dimensional photopatterning of hydrogels containing living cells
VA Liu et al.
BIOMEDICAL MICRODEVICES (2002)
Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering
R Landers et al.
BIOMATERIALS (2002)
Microfabrication of freedom and articulated alumina-based components
S Monneret et al.
MICROSYSTEM TECHNOLOGIES (2002)
Freeform fabrication by controlled droplet deposition of powder filled melts
C Ainsley et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition
Z Xiong et al.
SCRIPTA MATERIALIA (2002)
Fabrication of 3D chitosan-hydroxyapatite scaffolds using a robotic dispensing system
TH Ang et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2002)
Scaffold development using 3D printing with a starch-based polymer
CXF Lam et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2002)
Microfabricated PLGA scaffolds: a comparative study for application to tissue engineering
G Vozzi et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2002)
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
I Zein et al.
BIOMATERIALS (2002)
Complex ceramic-polymer composite microparts made by microstereolithography
C Provin et al.
IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING (2002)
Fabrication of porous poly(L-lactic acid) scaffolds for bone tissue engineering via precise extrusion
Z Xiong et al.
SCRIPTA MATERIALIA (2001)
High precision solder droplet printing technology and the state-of-the-art
QB Liu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Finer features for functional microdevices - Micromachines can be created with higher resolution using two-photon absorption.
S Kawata et al.
NATURE (2001)
A review of focused ion beam applications in microsystem technology
S Reyntjens et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2001)
Investigation of some phenomena occurring during continuous ink-jet printing of ceramics
BY Tay et al.
JOURNAL OF MATERIALS RESEARCH (2001)
Complex micromachines produced and driven by light
P Galajda et al.
APPLIED PHYSICS LETTERS (2001)
On precision droplet-based net-form manufacturing technology
Q Liu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2001)
Static micromixers based on large-scale industrial mixer geometry
A Bertsch et al.
LAB ON A CHIP (2001)
Real three-dimensional microstructures fabricated by photopolymerization of resins through two-photon absorption
HB Sun et al.
OPTICS LETTERS (2000)
Modelling of micropumps using unimorph piezoelectric actuator and ball valves
D Accoto et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2000)
Share Paper
