Machine path generation using direct slicing from design-by-feature solid model for rapid prototyping

This paper explains a new machine path generating system that its output is compatible with different rapid prototyping processes. The basis of this system is direct slicing from design-by-feature solid model. Slicing a computer-aided design (CAD) model through intersecting the model with the XY-plane at each Z increment is a well-known method of path generation. Slicing a CAD model is currently conducted through stereolithography (STL) file slicing, direct slicing, and additive direct slicing. A direct slicing approach inside a design-by-feature solid modeler is proposed. Autodesk Inventor solid modeler, as a design-by-feature solid modeler, is used for 3D solid modeling. The proposed system is implemented by Visual Basic codes inside Inventor. In this approach, first protrusion and subtractive features that form a model are extracted. Then, the intersection of each feature and the XY-plane is identified. Then, the internal and external loops are found. Depending on the specific rapid prototyping (RP) process requirements, internal or external hatch are also computed, respectively. Finally, a continuous path in required format is generated. The system reported in this paper has been successfully tested on several complex 3D models created in Inventor. The system offers customized output for different RP processes that need external or internal hatch pattern. The proposed approach for generating RP machine path through feature recognition inside design-by-feature solid modeler overcomes with the problems that are caused by imperfect STL files. Also, this system is capable of generating code compatible with major rapid prototyping processes.