Effect of pulsed-vacuum and ohmic heating on the osmodehydration kinetics, physical properties and microstructure of apples (cv. Granny Smith)

The influence of pulsed vacuum (PVOD) and ohmic heating (OH) on the osmotic dehydration (OD) kinetics and structure of apples was evaluated. Apple cubes (1 cm(3)) were immersed in a 65 degrees Brix sucrose solution at 30, 40 and 50 degrees C for 300 min. The PVOD treatment was conducted at 5 kPa for 5 min, and the OH treatment was conducted at 100 V (electric field of 13 V/cm). The water loss, solid gain, a(w), color and firmness were measured, and the microstructure was analyzed using electronic microscopy. The largest water loss was observed with the OD/OH treatment at 50 degrees C. The greatest amount of solute uptake and smallest firmness loss were obtained with the PVOD/OH treatment at 50 degrees C. Color differences were associated with the loss of clarity and corresponded to the transparency gain. OH treatments led to changes in the microstructure, cell walls and tissues of the apples due to the electroporation effect, which explained the increase of mass transference. Industrial relevance: The aim of this research was to determine the response of apple samples to osmotic dehydration using combined treatments of pulsed vacuum and ohmic heating. Two different technologies, vacuum and ohmic heating at mild temperatures, were used to determine and observe the mass transfer kinetics and microstructure of osmodehydrated apples. In several ohmic heating treatments, the time reduction reached 50% as compared to conventional heating. The increases of temperature, vacuum application and electroporation effect promoted the gain of osmotic solution into the tissue pores, thus reaching equilibrium in the sample with less water loss. Among the investigated conditions, the PVOD/OH treatment at mild temperatures was the best minimal processing method to preserve the fresh-like properties of the apples. (C) 2011 Elsevier Ltd. All rights reserved.