New biopolymer nanocomposites based on epoxidized soybean oil plasticized poly(lactic acid)/fatty nitrogen compounds modified clay: Preparation and characterization

Biodegradable polymers, such as poly(lactic acid) (PLA) have attracted a lot of attention in the scientific community recently due to a rapid growth of intensive interest in the global environment for alternatives to petroleum-based polymeric materials. Fatty nitrogen compounds (FNCs), fatty amides (FA), fatty hydroxamic acids (FHA), and carbonyl difatty amides (CDFA), which were synthesized from vegetable oils, were used as one of organic compounds to modify natural clay (sodium montmorillonite). The clay modification was carried out by stirring the clay particles in an aqueous solution of FA, FHA, and CDFA, by which the clay layer thickness increased from 1.23 to 2.61, 2.84 and 3.19 nm, respectively. The modified clay was then used in the preparation of the PLA/epoxidized soybean oil (ESO) blend nanocomposites. They were prepared by incorporating 2% of CDFA-MMT and 3% of both FA-MMT and FHA-MMT. The interaction of the modifier in the clay layer was characterized by X-ray diffraction (XRD), and Fourier transform infrared (FTIR). Elemental analysis was used to estimate the presence of FNCs in the clay. The nanocomposites were synthesized by solution casting of the modified clay and a PLA/ESO blend at the weight ratio of 80/20, which has the highest elongation at break. The XRD and transmission electron microscopy (TEM) results confirmed the production of nanocomposites. PLA/ESO modified clay nanocomposites show higher thermal stability and significant improvement of mechanical properties in comparison with those of the PLA/ESO blend. The novelty of this study is use of FNCs which reduces the dependence on petroleum-based surfactants. (C) 2010 Elsevier B.V. All rights reserved.